BeaverLAB DDL-TW1 Intelligent Astronomical Telescope Instruction Manual

Intelligent Astronomical Telescope
DDL-TW1
Instruction Manual

DDL-TW1 Intelligent Astronomical Telescope

Please read this manual carefully before using the product!
Please keep the instruction manual properly!
Special Reminder:
Do not observe the sun directly when not wearing “Bud film sunglasses”.
Otherwise, the image sensor will burn out.
Image Collector: WIFI Password: 12345678

Product Overview

Thank you for purchasing Dangbei Intelligent Astronomical Telescope.
Please read this manual carefully before use and keep it properly. Do not use the telescope without knowing how to use it In order to avoid unnecessary loss caused by wrong use.
Description of telescope composition

Description of telescope knobs

Usage Instructions

• Protect the lens of the objective lens and close the dust cover after use to avoid dust or foreign objects.
• Pay attention to protect the image collector. Please put the protective cover on after use to avoid dust or foreign matter.
• The telescope is suspended from the side, without heavy weight.
• When you do not use this product, please lock the various institutions of the gimbal to avoid the rotation of the astronomical telescope under the action of gravity.
• Please use in the environment of -10°C-45°C.
• This product is not waterproof, please avoid getting wet by any liquid.
• Keep away from fire and heat sources.
• Please keep dust out of the lens.
• This product is a precision instrument, please avoid collision and violent vibration.
• In the case of low temperature, the available capacity of the battery will have different degrees of decay, this is the characteristics of lithium batteries, is a normal phenomenon.
• In case of any abnormal phenomenon, please refer to the troubleshooting manual in time. In case of any unsolvable fault, please refer to the after-sales instructions. Disassembling telescopes without permission is not covered by the warranty policy and may result in irreparable damage.

Special Warning

• Do not directly observe the sun without properly installed Bader film sunglasses. This will cause the image collector chip to burn.
• Minors should be accompanied by an adult.
• Private modification of the telescope is prohibited.
• When the telescope is not in use, please cover the dustproof cover to keep the machine clean.

Installation Instructions

After receiving the product, users are required to complete the overall assembly of the product by themselves.
Install the tripod

1. Take out the tripod, loosen the fastening knob of the tripod, and pull out each leg to a uniform length. 2. Flatten the folded structure in the middle of the tripod.

Install primary mirror barrel with tripod

1. Prepare the main mirror, the whole head, the tripod, and the quick detachable rod, as shown below.
2. Take out the main mirror and the cradle head, and align the three positioning pins of the cradle head base with the corresponding three holes on the tripod.
3. Insert the quick disconnecting rod into the hole at the bottom of the tripod and tighten it clockwise.

***** During the removal, it is necessary to hold the head of the gimbal and the mirror barrel by hand while loosening the quick detachable rod to prevent falling.

Installation of image collector

1. Get the image collector ready.
2. Align the locking clip on the side of the image collector with the notch of the telescopic cylinder and insert it, and then rotate the image collector to align the mark point to fix and jam.

1. Take off the dust cover
2. Insert the image collector
3. Rotate clockwise to the locking position

Install the star finder

1. Prepare the star finder and align the star finder with the support port. Note the gap in the port.
2. Tighten the fixing knob of the star finder. Tip: Pay attention to the installation direction of the star finder.

1. Insert the star finder into the support interface
2. Tighten the fixing knob of the star finder

Replace the battery

1. Take out the star finder, place the battery in the interface where the star finder is inserted into the support, and remove the battery holder with your fingers or tweezers.
2. The star finder uses CR-2032 battery. When replacing the button battery, pay attention to the positive and negative terminals of the battery.

1. Take out the battery holder together (Be careful to loosen the locking knob)
2. Replace the battery, Pay attention to the positive and negative electrodes
3. Put the battery holder back, pay attention to the direction and position

Calibrate the red dot star finder

1. Find a target more than 100 meters away with your naked eye.
2. Adjust the primary mirror of the telescope to find the target as a whole and move to the center of the field of view.
3. Turn on the star finder red dot switch and turn on the light.
4. Find the red dot inside the circular observation mouth at the back of the star finder.
5. Adjust the position of the red dot through the knob next to the star finder mirror. The whole assembly is not finished until the red dot coincides with the target and the calibration is completed.
   Tip: After the observation, please turn off the red dot of the finder scope.

User Procedure

Through the focal length adjustment knob can focus the image, so that the image is more clear

Use of image collector:
This product is equipped with an image collector
Support wireless observation, and wired observation (users need to be equipped with OTG adapter, Apple system can not be wired connection.
Image collector interface and switch instructions:

Charging instructions

Mobile phone wireless connection
APP download and installation:

1. The image collector should be fully charged before use. If the observation time needs to be extended, it can also be equipped with charging devices such as mobile charging bank to charge in time during the observation.
2. Scan the QR code below to download the APP (search “Beaver Point” in App store or Google Play to download the APP)
   Scan here to download APP

https://play.google.com/store/apps/details?id=com.beaverlab.mic

|

https://apps.apple.com/cn/app/beaver-point/id1580548043

---|---
3. Long press the image collector for 2 seconds to start the device, and then it will be in standby state (the blue light is breathing at this time). Open the APP of the mobile phone, select Add Device → select the wifi name corresponding to the astronomical telescope (such as DL-TW1-XXXX), and connect → Click Enter after it shows that it has been connected. 4. Open the home page and click Start observation to enter the real-time transmission screen. 5. In the process of observation, images can be obtained by taking photos and videotaping. Click below the pictures to download and save them in the system album. 6. The exposure, sharpening, contrast, saturation and other parameters of the image can also be adjusted in real time through the App to achieve the optimal overall effect. 7. Click Astronomy Science on the home page to learn about the eight planets and main constellations of the solar system.

Mobile phone, pad and other wired connection

1. Double-click the switch on the image collector to switch the default wifi mode to wired connection mode.
2. Connect the device to the image collector through USB data cable.
3. Open the APP and click “Start Observation”.
   In the pop-up “Allow the app Beaver Point to access the USB device?? Dialog box, click OK.

Wired computer connection

1. Double-click the switch of the image collector to switch the default wifi mode to wired connection mode.
2. Connect the computer to the image collector through USB data cable.
3. Open the Windows software and select the device to observe.

Computer users can download the Windows version of the software to’s official website ( https://www.beaverlab-tech.com )

Pay attention to the cable connection

1. IPhone and pad do not support wired connection.
2. Mobile phone and pad users need to purchase OTG adapters.
3. Before use, the wireless mode of the image collector needs to be converted to the wired mode, and the mode switch can be realized by double-clicking the switch button.
4. In wired mode, the image collector will enter the automatic charging mode.

Astronomical observations
Guide to Lunar Observation

1. Connection: On a clear and moonlit night, check the device to ensure sufficient power of the device. Connect the device through mobile phone to realize real-time image transmission.
2. Moon search: open the switch knob of the red dot star search mirror, and find the red dot, find the moon through the star search mirror, and overlap the red dot with the moon target center by turning the head.
3. Moon watching: Use the focus knob until the image is clear. If you need to observe other stars, you can use star finder software or manual astrolabes to find them.

The telescope is equipped with a compass, combined with the gift of astrofinder, you can confirm the current map of the sky, and compare the map to find specific stars or nebulae for observation.
See the Astrolabe manual for specific usage

Accessories And Tools

Telescope Faults And Troubleshooting Methods

battery
The device cannot be charged| The charging port is not securely inserted
No power access
Equipment failure| Remove and reinsert the interface
Put through power supply
Send to repair
The image collector device
cannot be used normally| There is a power shortage in the image collector
Image collector water short circuit
The image collector crashed| Timely charging
Send to repair
Press the reset button once to reset
Image fuzzy| The ambient temperature changes rapidly, causing the lens to fog
Image collector lens filter is dirty| At a constant temperature,
Use it after the fog clears
Wipe the filter with a cotton swab dipped in alcohol
Fall, impact to cause the shell broken, crack| Damage caused by external use| Man-made damage is not covered by the warranty
The product can not be shut down or the key failure| Crash| Press the reset button once to reset

Dangdang Cat Intelligent astronomical telescope is a precision optical equipment with high professional degree. If there is a fault other than the above phenomenon, it needs to be sent back to the factory for repair.
It is recommended to do the following in daily use to keep your telescope in the best condition:
When you do not use this product, please put the dust cover on the objective lens to protect the lens and prevent dust at the same time. If there is dust on the image collector, it is recommended to use camel hair brush or air to blow it off.
Do not clean the optical lens as much as possible. A little dust on the lens will have little effect on the overall image.
Keep the telescope in a cool and ventilated place.
Warning: Do not use chemical lens cleaning solutions, which may damage optical parts.

Trademark And Legal Statement

“BEAVERLAB” is Beaver Technology(ShenZhen) Co.,Ltd. A trademark applied or registered in mainland China and used on the goods. Without the permission of the trademark owner, no person or organization may use the above-mentioned trademark marks on the commodities that have not been approved.
This manual is from Beaver Technology(ShenZhen) Co.,Ltd. This manual is made and copyrighted. No institution or individual may reproduce or distribute all or any part of this manual without permission.
Due to the continuous improvement of product functions, design changes and other reasons, this manual may be inconsistent with the product you purchased, please refer to the actual product.

Overall Telescope Parameters

Image acquisition unit
Battery Capacity| 1700mAh
Charging Source| 1A DC5V
Charging Port| Type-C

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

BEAVERLAB Intelligent Astronomical Telescope TW1
Product Name: BEAVERLAB Intelligent Astronomical Telescope TW1
Product Model: DDL-TW1
Product Net Weight: 6kg
Package Size: 688x410x197mm
Input Voltage: DCS5V =
Operating Temperature: -10°C ~45°C

Brand Ownerb: Beaver Technology(ShenZhen) Co.,Ltd.
Web Site: www.beaverlab-tech.com
Address: Room101.102, Building 6,F518 Idea
Land,No.1065,Baoyuan Road,Laodong,
Xixiang,Bao’an District, Shenzhen,
Guang Dong,China

Documents / Resources

| BeaverLAB DDL-TW1 Intelligent Astronomical Telescope [pdf] Instruction Manual
DDL-TW1, DDLTW1, 2A6VMDDL-TW1, 2A6VMDDLTW1, DDL-TW1 Intelligent Astronomical Telescope, Intelligent Astronomical Telescope, Astronomical Telescope, Telescope
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>