TURTLE BEACH Stealth 700 Gen 2 MAX Headset User Guide

TURTLE BEACH Stealth 700 Gen 2 MAX Headset

CONTENTS

• Stealth™ 700 Gen 2 MAX Headset
  

• USB-A Wireless Transmitter

• USB-C Charging Cable

IMPORTANT
PLEASE MAKE SURE YOUR HEADSET 15 UPDATED WITH THE LATEST FIRMWARE.

HEADSET CONTROLS

Use Superhuman Hearing'” Mode lo pinpoint quiet audio cues like enemy footsteps and weapon reloads.
During gameplay, you can activate and deactivate Superhuman Hearing™ by pressing the MODE button once. quickly.

Micropllone Mule
Flip up mic to mule. There i5 an audible tone when the mic is muted or unmuted.

Custom EQ Presets available through the Turtle Beach Audio Hub mobile app.

EQ PRESETS

Signature Sound
Boss Boost
Bass + Treble Boost
Vocal Boost

CHARGING

The Stealth” 700 Gen 2 MAX gives you “8 hours of rechargeable battery life. Make sure to charge it regularly before storing.

Headset Storage

Always charge your headset before storing it for any extended period of time [longer than 3 months]. Never store the unit in temperatures above 113°F/45 ºC.

SETUP FOR PLAYSTATION ® & NINTENDO SWITCH™

1. Put the transmitter into “PS” mode.
   

2. Connect transmitter USB port.
   It is recommended ta insert the wireless transmitter into the USB port at the front of the PS5™ console.
   

3. Power an headset.
   

4. Wait for headset & transmitter to pair.
   

5. Go To Setting > Sound > Audio Output> Output Device
   a. Select Stealth 700 Gen 2 MAX for Output Device
   b. Set Output to Headphones to All Audio
   c. Set Volume Control (headphones) level to Maximum
   Adjust your microphone levels by going to Settings > Sound > Microphone > Adjust Mic Level > Microphone Level
   On PS5™, enable 3D Audio to enhance through your headset, then go to Adjust 3D Audio Profile to select the best profile option for your game.

The Stealth'” 700 Gen 2 MAX supports Nintendo Switch”” wireless compatibility through the USB transmitter or Bluetooth”‘.
*Chat is available for games that support in-game chat capability while connected through the USB connection only.

MAPPABLE BUTTONS

The MODE Button and Mappable Wheel can be assigned to a new function based on your gaming style. To change the button’s assignment, follow these steps:

1. Download the Turtle Beach Audio Hub mobile app on your iOS or Android device.
2. Enable Bluetooth on your selected device. and use the Bluetooth pairing method to access the app.
3. After pairing, open the app and swipe to the second settings screen to assign new functions.
4. Once selected, your headset will save this configuration.
   Scan this QR Code To get the Audio Hub App on your phone SD you can customize your remappable buttons.
   

SETUP FOR PC MODE

The Stealth'” 700 Gen 2 MA)(‘s PC mode optimizes the headset to operate on your PC. In this mode, your MODE button will sync with your multimedia to allow you to play and pause your music and skip tracks and adjust your master volume from your PC or keyboard.
Any EQ modes you selected in PS mode will also be carried over in PC mode.

1. Put the transmitter into PC mode.
   

2. Put the transmitter into your platform USB-A port.
   

3. Power on headset.
   

4. Wait for headset & transmitter to pair.
   

BLUETHOOT PAIRING

BLUETDDTH SETUP

Your Stealth 700 Gen 2 MAX headset will enter Bluetooth pairing mode once powered on. If no Bluetooth connection is made in two minutes, Bluetooth pairing mode will stop. To put your headset into Bluetooth pairing mode, follow these steps:

1. Hold down the Bluetooth Button until the Bluetooth. Pairing'” prompt plays.
2. After placing your headset in pairing mode, select the headset from within your device’s Bluetooth Settings menu to connect to your headset.
   

USB TRANSMITTER COMPATIBILITY

The USB-A wireless transmitter is equipped with a switch that allows you to change compatibility modes.

Nintendo Switch™

LED BEHAVIORS

Solid White
Stays white for 2 seconds then goes back to blue.| Bluetooth™ Paired
Breathing Blue| (While Charging & On) Battery Full
LED turns Off when battery is fully charged ( if headset is Off)
Double-Blink Blue| Net Paired
Solid Red| (While Charging) Battery Charging
Breathing Red| Battery Low

ProSpecs™ Glasses Relief System

For those who game with glasses, adjust the ProSpecs'” Glasses Friendly System for added comfort

1. The ProSpecs'” Glasses Relief system creates a channel in the ear cushion to help reduce pressure on your glasses frame. To adjust this, you must first remove the ear cushion. Hold the ear cushion firmly and pull it away from the speaker. The ear cushion should come off with minimal effort.
   

2. Depending on the size of your glasses frame, use the tab adjustment to create the appropriate sized channel in the ear cushion. By default, the adjustment tab is set to the shallowest setting. To increase the size/depth of the channel in the ear cushion, simply pull the tab and attach it to the post based on your preference.
   

3. After you’ve adjusted the glasses friendly channel to your liking, place the ear cushion back onto the speaker.
   The ear cushion should snap into place with minimal effort.
   

Regulatory Compliance Statements for Stealth 700P Gen 2 MAX

Local Restrictions on Radio Usage
Caution : Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer’s OEM Regulatory Guidance document at the following http://www.turtlebeach.com/homologation or contact Turtle Beach directly.

Federal Communications Commission (FCC) Compliance Notices
This section includes the following FCC statements for Models: Stealth700P- MAX-RX and Stealth700P-MAX-TX:

• FCC IDs: XGB-3790RX & XGB-3790TX
• Class 8 Interference Statement
• RF Radiation Exposure & Hazard Warning
• Non-Modification Statement

Federal Communications Commission (FCC) Compliance Notices

This section includes the following FCC statements for Models: Stealth700P- MAX-RX and Stealth700P-MAX-TX:

• FCC IDs: XGB-3790RX & XGB-3790TX
• Class B Interference Statement
• RF Radiation Exposure & Hazard Warning
• Non-Modification Statement

Class B Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 I This device may not cause harmful interference, and 121 this device must accept any interference received, including interference that may cause undesired operation.
RF Radiation Exposure & Hazard Statement
To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 2 cm (0.8 in.) from all persons. Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed. Installers of the radio and end users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Non-Modification Statement
Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage the Stealth700P-MAX-RX and Stealth700P-MAX-TX and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Please contact Turtle Beach for a list of approved 2.4 GHz antennas.
This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIA)

Canadian ICES Statement :
IC: 3879A-3790RX & 3879A-3790TX
This device complies with ICES-003 and RSS-247 of Industry Canada. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

European Union and European Fair Trade Association Regulatory Compliance
This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELANO, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, !CELANO, LICHTENSTEIN, NORWAY, SWITZERLAND

Declaration of Conformity
Marking by this symbol:
indicates compliance with the Essential Requirements of the Radio Equipment Directive IRED) of the European Union 12014/53/EU).
This equipment meets the following conformance standards:

This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. To fulfil our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle. https://www.complydirect.com/the- recycling-room/

To access the rating label:

1. Remove the left ear pad.
   

2. Place ear cushion back onto the silver ring of your headset. The ear cushion wi II snap into place.
   

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>