JBL Quantum 360X Wireless Headphone for Xbox User Guide

: June 11, 2024
: JBL

JBL Quantum 360X Wireless Headphone for Xbox

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-product

JBL QuantumENGINE

DOWNLOAD JBL QUANTUMENGINE TO GAIN ACCESS TO QUANTUM 3D AUDIO TECHNOLOGIES. JBLquantum.com/engine

Software requirements

Platform: Windows 10 (64 bit only) / Windows 11
500MB of free hard drive space for installation

Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE

JBL QuantumSURROUND is available on Windows only. Software installation is required.

WHAT’S IN THE BOX

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-1

Requirements

System compatibility

Connectivity| PC| PS4/PS5| XBOX™| Nintendo Switch™| Mobile| MAC
---|---|---|---|---|---|---
2.4GHz Wireless| | Stereo| Stereo| Stereo| Not compatible| Stereo
Bluetooth| Stereo| Not Compatible| Not Compatible| Stereo| Stereo| Stereo

OVERVIEW

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-3

GAME AUDIO-CHAT BALANCE DIAL
VOLUME CONTROL
MICROPHONE MUTE / UNMUTE
CHARGING LED
USB-c PORT
2.5MM JACK FOR BOOM MICROPHONE
FLAT-FOLD EAR CUP
POWER / 2.4GHz / BLUETOOTH LED
POWER ON / OFF AND BLUETOOTH PAIRING SLIDER
2.4GHz LED
2.4GHz PAIRING BUTTON

POWER ON & CONNECT (XBOX)

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-4

POWER ON & CONNECT (PC, mac ETC.)

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-5

Only required for devices (e.g., Windows PC) without auto switch (green to white automatically)

Bluetooth

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-6

BUTTON COMMAND

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-21

INCREASE GAME VOLUME
INCREASE CHAT VOLUME
+ INCREASE MASTER VOLUME
– DECREASE MASTER VOLUME
MICROPHONE / UNMUTE Xl

First time setup

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-13

CONNECT THE HEADSET TO YOUR PC VIA 2.4GHz USB WIRELESS CONNECTION.
GO TO “SOUND SETTINGS” “SOUND CONTROL PANEL”.
UNDER “PLAYBACK” HIGHLIGHT “JBL OUANTlJM360X WIRELESS FOR XBOX GAME” AND SELECT “SET DEFAULT” “DEFAULT DEVICE”.
HIGHLIGHT “JBL QUANTUM360X WIRELESS FOR XBOX CHAT” AND SELECT “SET DEFAULT” “DEFAULT COMMUNICATION DEVICE”.
UNDER “RECORDING” HIGHLIGHT “JBL QUANTUM360X WIRELESS FOR XBOX CHAT” AND SELECT “SET DEFAULT” “DEFAULT DEVICE”.
IN YOUR CHAT APPLICATION SELECT “JBL OUANTlJM360X WIRELESS FOR XBOX CHAT” AS THE DEFAULT AUDIO DEVICE.
FOLLOW THE ONSCREEN INSTRUCTIONS TO PERSONALIZE YOUR SOUND SETTINGS.

Dual source switching

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-14

MICROPHONE

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-15

CHARGING

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-16

LED BEHAVIOUR

JBL-Quantum-360X-Wireless-Headphone-for-Xbox-fig-17

TECH SPEC

Model: QUANTUM360X WIRELESS FOR XBOX
Driver size: 40 mm Dynamic drivers
Frequency response (Passive): 20 Hz – 20 kHz
Frequency response (Active): 20 Hz – 20 kHz
Microphone frequency response: 100 Hz – 8 kHz
Max input power: 30 mW
Sensitivity: 98 dB SPL @1 kHz / 1 mW
Maximum SPL: 94 dB
Microphone sensitivity: -42 dBV / Pa @1 kHz
Impedance: 32 ohm
2.4GHz Wireless transmitter power: < 7 dBm (EIRP)
2.4GHz Wireless modulation: GFSK
2.4GHz Wireless carrier frequency: 2402 MHz – 2480 MHz
Bluetooth transmitted power: < 6 dBm (EIRP)
Bluetooth transmitted modulation: GFSK, π/4-DQPSK
Bluetooth frequency: 2402 MHz – 2480 MHz
Bluetooth profile version: HFP: v1.5, A2DP: v1.3
Bluetooth version: BT Core: v5.2
Battery type: Li-ion battery (3.7 V / 500 mAh)
Power supply: 5 V, 1 A
Charging time: 2 hrs
Music play time with only 2.4GHz on: Up to 22 hrs
Talk time with only 2.4GHz on: Up to 22 hrs
Music play time with only BT on: Up to 26 hrs
Talk time with only BT on: Up to 26 hrs
Microphone pickup pattern: Omni-directional
Weight: 253.1 g

FCC STATEMENT

IC RF Exposure Information and Statement for Headphone

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A- JBLQ360WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.007 W/Kg.

The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-Q360XWLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.238 W/Kg.

Head operation

The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

_ IC: _6132A-JBLQ360WL

Body operation

The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.

IC: 6132A-Q360XWLTM

This product is homologated by Anatel, in accordance with the regulated procedures for evaluating the conformity of telecommunications products and meets the applied technical requirements.
For more information, consult the Anatel website: www.anatel.gov.br

This equipment is not entitled to protection against harmful interference and may not cause interference in duly authorized systems.

Attention: according to Brazilian law n° 11,291, prolonged exposure to noise greater than 85dB can cause damage to the auditory system.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Custom headphones

Manufacturer: Harman International Industries Incorporated, USA, 06901 Connecticut, Stamford, Atlantic Street 400, office 1500
Made in China

Importer: LLC “HARMAN RUS CIS”, Russia, 127018, Moscow, st. Dvintsev, 12, building 1

Warranty period

1 year

Service life: 2 years
Service center information: www.harman.com/ru

Technical support: 8 (800) 700 0467
An organization authorized to accept consumer claims: HARMAN RUS CIS LLC

The product is certified

The date of manufacture of the device is determined by two letters from the second group of characters of the serial number of the product, followed after the separator character “-“. The encoding corresponds to the order of the letters of the Latin alphabet, starting from January 2010: 000000-MY0000000, where “M” is the month of production (A – January, B – February, C – March, etc.) and “Y” – the year of production ( A – 2010, B – 2011, C – 2012, etc.).

Product specifications and app screens are subject to change without notice.