orange PI 4 LTS Motherboard User Manual
- June 11, 2024
- orange PI
Table of Contents
orange PI 4 LTS Motherboard User Manual
Product Description
What’s Orange Pi 4 LTS (4GB)
It’ s an open-source single board computer. It can run Android, Ubuntu,Debi- an. It uses the Rockchip RK3399 ( 28nm HKMG Process ) , and has 4GB LPDDR4 SDRAM.
Top View
Bottom View
Orange Pi 4 LTS (4GB) v1.2 Pin definition
Who’ s it for?
Orange Pi 4 LTS ( 4GB) is for anyone who wants to start creating with
technology -not just consuming it. It’s a simple, fun, useful tool that you
can use to start taking con-trol of the world around you.
What can I do with Orange Pi 4 LTS (4GB) ?
You can use it to build
- A computer
- A wireless server
- Games
- Music and sounds
- HD video
- A speaker
Android Scratch Pretty much anything else, because Orange Pi 4 LTS ( 4GB) is open source.
Model | Orange Pi 4 | Orange Pi 4 LTS ( 4GB ) |
---|
Hardware features
SOC| Rockchip RK3399| Rockchip RK3399
CPU Architecture| Cortex-A72+Cortex-A53| Cortex-A72+Cortex-A53
CPU Frequency| 1.8GHz| 1.8GHz
Core Number| 6| 6
Memory Bus| LPDDR4| LPDDR4
Memory| Dual 4GB| 4GB
Onboard Storage| 16GB EMMC Flash| 16GB EMMC Flash(option)
WiFi+BT| WiFi+BT5.0(AP6256)| WiFi+BT5.0(CDW.20U5622-00)
Onboard Network| 10M/100M/1000M Ethernet (Realtek RTL8211E)| 10M/100M/1000M
Ethernet ( T8531 C)
USB| 2USB2.0+1USB3.0+1USB3.0 Type-C| 2USB2.0+1USB3.0+1USB3.0 Type-C
Debug UART| 3Pin| 3Pin
PCIE| Surppon Mini PCIE Port| Surppon Mini PCIE Port
GPIO| GPIO140 Pin| 26Pin
Power Interface| DC SV/3A ,TYPE-C 5V/3A| DC SV/3A ,TYPE-C 5V/3A
PMU| Yes| Yes
MIC| Yes| Yes
PCB Size| 56x9lmm| 56x9lmm
Software features
Supponed OS| Android, Ubuntu, Debian| Android, Ubuntu, Debian
Orange Pi 4, Orange Pi 4 LTS ( 4GB)
Orange Pi 4
Orange Pi 4 LTS (4GB)
Hardware Specification
SOC | Rockchip RK3399 (28nm HKMG Process) |
---|---|
CPU |
- Based on the large and small size of big.LITTLE core architecture: Dual—Core Conex—A72 (large core)* Quad—core
- 6—Core ARMRb4—bit processor .main frequency speeds up to 1.8GHzHigh—Performance
GPU|
- Suppor for AFBCSuppons OpenGL ESI. /2.0/3.0/3.1,OpenVG1.1,OpenCL,DXII
- High—Performance Multi—Core Mali—T860 GPU
- Support for AFBC
PMU| RK808 PMU
Memory| KGB LPDDR4
Onboard Storage| 16GB EMMC Flash togtion• MicroSD (TF) Card Slot
Onboard Ethernet| Suppor 1 0/100M/1000M Ethernet (YT853 1C
Onboard WIFI+BT|
- CDW.20U5G22-00
- Suppon IEEE 802.11 a/b/g/n/ac, 2T2R
- Suppon BT5.0
Video|
- Output: 3 Smm Jack and HDMI2 0a
- Input: MIC
Audio|
- HDMI 2 0,Suppons 4K@60fps Output*DP 1.2(Display Pos), Suppons 4K@60fps Output
- Suppons Dual MIP!—DSI ( 4 Lines Per Channel )
Camera| 2MIPI—CSI Camera Connector (MIPIRXO MIPI TX1/RX1)
USB| 2”USB2.0 1USB3.0 1“USB3.0 Type—C
Debug UART| 3 Pin
GPIO| 26 Pin
PCIE| Surppon Mini PCIE Pos
Key| Upgrade Key & Reset Key
Power Supply| DC SV/3A. TYPE—C SV/3A
LED| Power Led & Status Led
Supported OS| Android Ubuntu Debian
Appearance specification introduction:
Dimension: 56mm x 91mm
weight: 49g
range pi is a trademark of the Shenzhen Xunlong Software CO., Limited.
Completely open source maker artifact
Orange Pi 4 LTS (4GB) runs Andriod
Orange Pi 4 LTS (4GB) runs Ubuntu/Debian
Product Display
Front
Back
45° angle
45° angle
45° angle
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>