ARCHOS Oxygen101S+Dock Smart Tablet User Guide

June 11, 2024
ARCHOS

Oxygen101S+Dock Quick Start Guide

Oxygen101S+Dock Smart Tablet

This quick start guide helps you to start using your device properly.

  1. Describing your device

  2.  Volume +/-

  3. On/Off

  4. Pogo-Pin port

  5. USB Type C

  6.  amera6. Headphone

  7. Micro SD/SIM

  8. Loudspeaker

  9. Fingerprint Sensor

Getting started

When inserting your Micro-SD card, make sure to follow the illustration, otherwise you may damage the slot or the card.

ARCHOS Oxygen101S+Dock Smart Tablet - Micro-SD

Describing your device

Getting started

Main Specification

CPU: SC9863 Octa-core Arm Cortex-A44 1.6GHz+1.2GHz
GPU: IMG8322
OS: Android 9.0
DDR: 3GB
Memory: 32GB
LCD Size: 10.1 inches
LCD Resolution: 1920*1200 IPS
Camera: Rear 5M
WiFi: 802.11 a/b/g/n/ac
Bluetooth: BT5.0
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Tablet PC (FCC ID: SOV-AC101SOX) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the followingmeasures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC ID: SOV-AC101SOX
Canadian regulatory statement
This device complies with Innovation, Science, and Economic
Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
SAR Statement:
Mobile Phone has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in Canada that set the limit averaged over 1 gram of tissue. During testing, Tablet PC (IC: SOV-AC101SOX) radios are set to their highest transmission levels and placed in positions that simulate uses against the head, with no separation, and when worn or carried against the torso of the body, with 10mm separation. To reduce exposure to RF energy, use a hands-free option, such as the built-in speaker phone, the supplied headphones, or other similar accessories. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals