KARAOKE KM10 Bluetooth Speaker User Manual

User Manual
KM10
Bluetooth Speaker

KM10 Bluetooth Speaker

Thank you for purchasing the V60 Bluetooth Speaker. Please read
the user manual before use and keep ithandy for future reference.

Package Contents

1 x KM10 Party Speaker
1 x Type-C Cable
1 x Carrying Strap
1 x User Manual
1 x Aux-in Cable
2 x Wireless Karaoke Mics

Specifications

Button Configuration

1. Power on/Power off
2. Mode Switching
3. Microphone button
4. Volume- of Reverberation
5. Volume+ of Reverberation
6. Volume- of Microphone
7. Volume+ of Microphone
8. EQ/Power Saving
9. Vocal sound elimination
10. Play/Pause
11.  Volume-/Previous Track
12. Volume+/Next Track
13. 6.5mm wired mic port
14. AUX port
15. USB port
16. TF card slot
17. Type-C charging port/Inner recharging port

Instructions

successfully
Turn on/off
RGB light| Default lighting mode is breathing. Press the “POWER” button once to switch among 3lighting modes| RGB light on/off
Turn off| Press the “POWER” button for 2s to turn off| Indicator off
Turn off| Press the “POWER” button for 8s to shutdown| Indicator off
| Mode switching| Press the “Mode” button once to switch among 4 playing modes (BT/U Disk/TF Card/Aux)|
Disconnect from Device| Press the “Mode” button for 3s to disconnect| Indicator flashing
Reset
Stereo Pairing| Press the “Mode” button for 8s to reset
Double Press the ” button tcenter/exit stereo pairing mode| Indicator flashing
Both speakers are entering stereo mode with stereo paring indicator stays yellow.
| Switch EQ Modes| Default EQ Mode is balanced mode. Press the “EQ” button once to switch a mongtriple EQ modes| Balanced mode:  off
3D mode: Stays White Deep Bass: Stays Green
Exit Power- saving mode| Press the “EQ” button for 8s to turn off power-saving mode to charge for your device|
Mute| Press the “EQ” butto
for 3s tomute/unmute the external sound. Supports wired headphone via monitoring port| 1
| Karaoke Mode| Press Once to Enter/ Exit Karaoke Mode| Pairing: Indicator Flashes Green,
Connected: indicator Stays Green
| Play/Pause| Press the “Play/Pause” button once to play/pause music| Pause in BT Mode: Stays Blue
Pause in TF Card/Aux Mode: Flashing Blue
| Answer the phone| Press the “Play/Pause” button once to answer the call|
Decline a call| Press the “Play/Pause” button for 2s to reject calls|
End up the call| Press the “Play/Pause” button once to hang up the call|
Redial| Double Press n
the “Play/Pause button to dial
the last contact|
Voice assistant| Press the “Play/Pause” button for 3s to
activate voice assistant|
| Volume down| Press the “Volume-” button once to
turn down volume
Previous track| Press the “Volume-” button for 2s to skip to previous track
| Volume up| Press the “Volume+ ” button once to turn up volume
Next track| Press the ” Volume+” button for 2s to skip to next track
| Vocal sound elimination| Press the ” Vocal Sound Elimination” button once to eliminate/restore vocasound
---|---|---
| Reverb –| hort press to decrease MIC reverb
Bass sound –| Long press to decrease the bass
| Reverb +| Short press to increase MIC reverb
Bass sound +| Long press to increase the bass
| MIC volume-| Short press to decrease MIC volume
| MIC volume+| Short press to increase MIC volume

How to Use

1. Turn On/Off

2. Bluetooth Connection
   Search & click “KM10” to connect.

3. Disconnect from Bluetooth
   Press the “Mode” button for 3s to disconnect from Bluetooth.

4. USB-A Power Bank Function
   This speaker carries a USB charge-out function that will automatically detect your device and begin to charge it when the charging cable is plugged into the USB-A port under powering-on mode.

5. Aux-in Mode
   Simply connect the speaker with your non-Bluetooth device via the 3.5 mm audio jack cable.
   Note: After plugging in an audio cable, the speaker will automatically switch to Aux-in mode.

6. USB Flash Drive Mode
   The speaker will play the music from your U-disk when plugging into the slot.

7. TF/Micro SD Card Slot Mode
   The speaker will play the music from your TF/Micro SD card  when plugging the card into the slot. The maximum supported memory is 128 GB

8. Charging

9. Reset
   Press “Mode” button for 8s.

10. Auto Power Off
    The speaker will power off automatically after 10 minutes if it doesnot pair with any device through Bluetooth. When in low battery, thespeaker will power off automatically as well.

Care & Maintenance

-Do not use any form of detergents or cleaning material to clean the product as any type of chemical may make this device unusable.
-Do not disassemble this product. It contains no user serviceable parts.
-Do not drop or jump on it and treat it with care for the best performance.
-Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the body of the product if kept at an unfriendly place.
-Do not dispose this product in fire or batteries may explode or leak.

FCC Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if nat installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or mare of the following measures:
—Reoarient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different trom that to which the Teceiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.

Address: Block A,Galaxy WORLE
Building,Bantian Street,Longgang District, Shenzhen
Email:KaraokeSpeaker@outlook.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>