iGear iG-1023 Cosmic Ambient Light and Speaker Instruction Manual
- June 11, 2024
- iGear
Table of Contents
iGear iG-1023 Cosmic Ambient Light and Speaker
Product Information
The iGear Cosmic is a premium series ambient light and speaker. It features Bluetooth version 4.2, with a Bluetooth transmission distance of up to 10 meters. The speaker has an output power of 10 watts and features a 52mm driver with a distortion rate of 10% and a signal-to-noise ratio (SNR) of over 75dB. The device is powered by a built-in high-efficiency lithium battery with a capacity of 3600mAh. The product also includes 120 LED lights.
Timer Mode
To turn on or off the timer function, long press the power on/off button. The indicator light will stay on when the timer function is started. In the timer function mode, the flame lamp will stay on for 5 hours and then stay off for 19 hours and start again for 5 hours on a rotation basis until the battery is discharged.
Light Mode
To turn on or off the flame lamp, quick press the flame lamp on/off switch.
Bluetooth Speaker Mode
To turn on the speaker, long press the power on/off button for 3 seconds until the white indication light starts blinking and you hear the indication tune. Search for “iGear Cosmic” in your Bluetooth menu. Once the speaker is paired with your device, you will hear a beeping sound, and the white indication light will stay on continuously. Short press the button to play/pause music. Short press the next track button to go to the next track. Short press the previous track button to go to the previous track. Long press the volume increase button to increase the volume (when reaching maximum volume, the speaker will say “di di”). Long press the volume decrease button to decrease the volume.
Charging Instruction
Insert the USB cable into the type-C charging port to charge the device. When the product is charging, the red LED will stay on. Once the charging is completed, the LED will go off. It is not recommended to charge while using. Pull off the USB cable after full charge. Do not charge the product in a high humidity environment. Charge the product once every month when not in use.
Attention
- Do not damage the mainframe.
- Do not use benzene, diluent, and other chemicals to clean the surface.
- Do not place it close to magnetic and electric fields.
- Avoid keeping it under direct sunlight or near heating appliances.
- Do not repair, disassemble, or transform the product by yourself.
Contact Information
The iGear Cosmic is imported and marketed by iGear Tech Pvt. Ltd. For consumer complaints, contact their toll-free number at 1800 22 8495 or email sales@igear.asia between 10am to 5pm, Mon-Fri. The model number for this product is iG-1023.
Operation Method
Light Mode
Flame lamp On/Off switch, quick press to Start or Stop the lamp.
Bluetooth Speaker Mode
-
Power On/Off Button:
Long press for 3 seconds to start the speaker, the white indication light will start blinking and you will hear the indication tune. Search for iGear Cosmic in your Bluetooth menu. Once the speaker is paired with your device, you will hear a beeping sound and the white indication light will stay on continuously. Short press the button to Play/Pause. -
Next Track:
Short press the button to go to next track. -
Previous Track:
Short press the button to go to previous track. -
Volume Increase Button:
Long press to increase the volume (when reach maximum volume, the speaker will say “di di”). -
Volume Decrease Button:
Long Press to decrease the volume
Timer Mode
Long press the button to turn on or off the timer function. The indicator light will stay on when the timer function is started. In the timer function mode, the flame lamp will stay on for 5 hours and then stay off for 19 hours and start again for 5 hours on a rotation basis till the battery is discharged.
Charging Instruction
Power Input:
Insert the USB cable into the port, when the product is charging, red LED will
stay on. Once the charging is completed the LED will go off.
Attention
- Please charge the product in ambient temperature ranging from 0°C-40°C.
- Not recommended for charging while using.
- Please pull off the USB cable after full charge.
- Please do not charge the product in high humidity environment.
- The rechargeable lithium battery is built in to the product and cannot be removed or replaced.
- Please charge the product once every month when not in use.
- Please do not damage the mainframe.
- Please do not use benzene, diluent and other chemicals to clean the surface.
- Please do not place it close to magnetic and electric field.
- Please avoid keeping it under direct sunlight or near heating appliances.
- Please do not repair, disassemble, transform the product by yourself.
Technical Parameters
- Bluetooth Version V4.2
- Bluetooth Name iGear Cosmic
- Bluetooth Transmission Distance ≤10M
- Output Power 10W
- Speaker Parameters 52MM 4Ω8W
- Number of LED 120pcs
- Distortion Rate ≤10%
- SNR >75dB
- Power Supply 5V 1A
- Built-in High-Efficiency Lithium Battery 3.7V 3600mAh
Imported and Marketed By:
IGear Tech Pvt. Ltd. 204, Sai Corporate Park, Laxmi Nagar, Off Link Road,
Goregaon West, Mumbai – 400104.
In case of consumer complaints:
Toll free number – 1800 22 8495
Email : sales@igear.asia
(Between 10am to 5pm, Mon- Fri)
Model No.: iG-1023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>