ENDORFY EY6A009 LIX Plus Onyx White Wireless Ultralight Mouse User Manual
- June 11, 2024
- ENDORFY
Table of Contents
ENDORFY EY6A009 LIX Plus Onyx White Wireless Ultralight Mouse
DIMENSION
USB
WIRELESS
OFF
SOFTWARE
BUTTON DESCRIPTION
- Left (1) and right (2) button
- Scroll wheel/middle button (3)
- DPI button (4)
- Forward (5) and back (6) buttons
DPI CHANGE
Pressing the button once will switch DPI to the next level. When changing the
DPI, the mouse indicates the new level by illuminating the appropriate color
for 3 seconds. The values of individual levels and the assigned colors can be
modified using our software.
INSTALLATION
Connect the mouse to the USB port of your computer. Wait until the hardware is
identified. The system will automatically select the drivers.
TECHNICAL SPECIFICATIONS
- Weight (without cable): 69 g (±1)
- Cable : Paracord USB cable
- Cable length: 1.6 m
- (Main) switches: Mechanical Kailh® GM 8.0 80M
- Backlight: RGB 16.8M colors
- Sensor: Pixart® PAW-3370
- Maximum DPI: 19.000
- Base DPI levels (without software modifications): 1. 400 2. 800 3. 1000 4. 1500 5. 2000 6. 3000
- Base polling rate: 500 Hz
- Dimensions: 126×65.7×38.5 mm
- OS: Win/Mac/Linux
BATTERY SAVING FUNCTIONS
BATTERY INDICATORS (SCROLL LIGHT
Safety instruction
-
The product should be used as intended. Incorrect use may damage the product and be dangerous to your health.
-
Make sure that the product is in good working order before using it.
-
The warranty does not cover mechanical damage to the product.
-
This device is intended for indoor use, under normal humidity conditions. Do not use it outdoors.
-
Do not install and use the device within reach of children.
-
To prevent damage from condensation, allow the device to warm up to ambient temperature before use.
-
Clean only with a dry, clean cloth. Do not handle with wet hands.
-
No user-serviceable components inside. Return to an authorized service center for repairs.
-
Opening the device or modifying it will void the warranty.
-
Do not use the product near liquids or in places where it may be directly exposed to liquids. If the device comes into contact with any liquids, immediately disconnect it from the power source.
-
In the event of a malfunction, disconnect it from the power source immediately and contact EndorfyTechnical Support.
-
Do not discard electrical and electronic equipment together with other household waste.
The end user is responsible for the correct disposal of unnecessary or faulty electrical equipment by returning it to the collection
point or to the seller. Contact local authorities or the store where you purchased the product for additional information. -
Do not disassemble the batteries or expose them to moisture, fire, high temperatures or liquids.
-
Do not use or charge the device if you notice any leakage, deformation, or discoloration of the battery.
-
Do not leave the battery fully discharged for long periods of time. Do not attempt to remove or replace the built-in battery.
-
Batteries should be charged using only the supplied cable connected to a computer USB port. Do not use external power
adapters. -
Improper handling of batteries or failure to follow the above precautions may result in a fire or chemical burns.
-
Battery life depends on how the battery is used.
-
End-of-life batteries must be disposed of in compliance with local ordinances or regulations.
-
Keep the batteries out of reach of children
Designed by ENDORFY
COOLING SP. Z 0.0.
UL. SOKO-t.OWSKA 24
05-806 SOKOH)W, POLSKA
TEL. +48222920130
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>