JBL WAVE BEAM Wireless Earbuds User Guide
- June 11, 2024
- JBL
Table of Contents
JBL WAVE BEAM Wireless Earbuds
Product Information
The JBL Wave Beam is a set of wireless earbuds that come in three different sizes – small, medium, and large. The package includes the JBL headphones and an app that allows for greater control and personalization of your listening experience. The earbuds have an 8mm dynamic driver and are powered by a lithium-ion polymer battery. The charging case also has a lithium-ion polymer battery and can be charged using a 5V 1A power supply. The earbuds have a frequency response of 20Hz – 20kHz.
Product Usage Instructions
-
Try different sizes of earbuds to find the perfect fit and audio performance. The earbuds come in three sizes – small, medium, and large.
-
Power on the earbuds by holding down the button for 2 seconds.
The earbuds will automatically enter pairing mode. -
On your Android device with version 6.0 or higher, go to Settings > Bluetooth and select “JBL Wave Beam” from the list of available devices to connect.
-
Once connected, you can use the earbud controls to adjust the settings. Hold down the button for 2 seconds to enable advanced controls through the JBL Headphones app.
-
The earbuds can be turned off by holding down the button for 5 seconds.
-
To charge the earbuds, place them in the charging case. The LED light on the case will indicate when the earbuds are charging (white) and when they are fully charged (blue). The charging case can be charged using a 5V 1A power supply.
For more information on advanced controls and personalization options, download the JBL Headphones app from the app store.
WHAT’S IN THE BOX
APP
JBL Headphones
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR
LISTENING EXPERIENCE WITH THIS FREE APP.
how to wear
- Try different sizes for a perfect fit and audio performance.
FIRST TIME USE
Power on & CONNECT
DUAL CONNECT
CONTROLS
Enable advance controls by connecting your JBL WAVE BEAM to JBL Headphones App .
VOICEAWARE
Power off
Manual SETUP
Connect to a new Bluetooth device
Factory reset
DO MORE WITH THE APP
Charging
Led behaviors
TECH SPEC
- Model: WAVE BEAM
- Driver size: 8 mm/ 0.315” Dynamic Driver
- Power supply: 5 V 1 A
- Earbud: 4.4 g per pc (8.8 g combined)/0.0097 lbs per pc (0.0194 lbs combined)
- Charging case: 39.5 g/ 0.0871 lbs
- Earbud battery type: Lithium-ion polymer (48 mAh/ 3.85 V)
- Charging case battery type: Lithium-ion polymer (530 mAh/ 3.7 V)
- Charging time: <2 hrs from empty
- Music playtime with BT on: 8 hrs
- Talk time: 4.5 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 100 dB SPL@1 kHz
- Maximum SPL: 95 dB
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Bluetooth version: 5.2
- Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth transmitter frequency range : 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: <15 dBm
- Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
- Maximum operation temperature: 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
This equipment complies with Directive 2014/53/EU radiation exposure limits
set forth for an uncontrolled environment. End user must follow the specific
operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by European Union market(France). These requirements set a
SAR limit of 2W/kg averaged over ten gram of tissue. The highest SAR value
0.221W/kg reported under this standard during product certification for use
when properly worn on the head.
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective owners.