Rockford Fosgate R165X3 3 Way Car Audio Coaxial Speakers User manual
- June 11, 2024
- Rockford Fosgate
Table of Contents
Rockford Fosgate R165X3 3-Way Car Audio Coaxial Speakers
Introduction
Congratulations on your purchase of the world’s finest brand of car audio amplifiers. At Rockford Fosgate, we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship, and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
For maximum performance, we recommend you have your new Rockford Fosgate product installed by an Authorized Rockford Fosgate Dealer, as we provide specialized training through Rockford Technical Training Institute (RTTI). Please read your warranty and retain your receipt and original carton for possible future use.
Great products and competent installations are only a piece of the puzzle when it comes to your system. Make sure that your installer is using 100% authentic installation accessories from Rockford Fosgate in your installation. Rockford Fosgate has everything from RCA cables and speaker wires to power wires and battery connectors. Insist on it! After all, your new system deserves nothing but the best.
To add the finishing touch to your new Rockford Fosgate image order your Rockford accessories, which include everything from T-shirts to jackets.
Visit our website for the latest information on all Rockford products; www.rockfordfosgate.com or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other countries, call +001-480-967-3565 or FAX +001-480-966-3983.
If, after reading your manual, you still have questions regarding this product, we recommend that you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial number, model number, and date of purchase available when you call.
PRACTICE SAFE SOUND
Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High-powered auto sound systems may produce sound pressure levels well over 130 dB. Use common sense and practice safe sound.
Safety
This symbol with “WARNING” is intended to alert the user to the presence of important instructions. Failure to heed the instructions will result in severe injury or death. This symbol with “CAUTION” is intended to alert the user to the presence of important instructions. Failure to heed the instructions can result in injury or unit damage.
- To prevent injury and damage to the unit, please read and follow the instructions in this manual. We want you to enjoy this system, not get a headache.
- If you feel unsure about installing this system yourself, have it installed by a qualified Rockford Fosgate technician?
- Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire, and/or possible injury.
specifications
- Model: R165X3
- Nominal Diameter: 6.5” (165mm)
- Description: 3-Way
- Nominal Impedance: 41
- Frequency Response: 52-20kHz
- Voice Coil Diameter: 1.0” (25.4mm)
- Power Rating (RMS/Peak): 45W / 90W
- Fs – Free Air Resonance: 69 Hz
- Qts: 0.74
- Vas: 0.47ft3 (13.3L)
- Sensitivity (1W/1M): 91dB
- Sensitivity (2.83V/1M): 94dB
- Xmax: 0.07” (1.9mm)
- Mounting Diameter: 5.51” (140mm)
- Mounting Depth: 2.15” (54.5mm)
- Grille/Trim Ring: YES
- Adaptor Plate: NO
CEA 2031
Power handling on Rockford Fosgate speakers conforms to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling that over time can damage voice coils.
VERIFIED WITH KLIPPEL
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate has made an investment in Klippel to deliver the best possible speakers and subwoofers to their customers.
Contents
- Pair Prime Series Full Range Speakers
- Pair of grilles/trim rings (R14X2, R1525X2, R165X3, R1675X2, R169X2, and R169X3 only)
- Installation Accessories (16 ft., 26 gauge speaker wire, 8-speed clips, and 4 mounting screws)
Installation Considerations
Before beginning any installation, follow these simple rules:
- Be sure to carefully read and understand the instructions before attempting to install these speakers.
- For safety, disconnect the negative lead from the battery prior to beginning the installation.
- For easier assembly, we suggest you run all wires prior to mounting your speakers in place.
- Use high-quality connectors for a reliable installation and to minimize signal or power loss.
- Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines, or electrical wiring when working on any vehicle. If the installation is in a boat, take care not to cut or drill through the main hull.
- Never run wires underneath the vehicle. Running the wires inside the vehicle or hull area provides the best protection.
- Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.
Mounting
- Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting location is deep enough for the speaker to fit; if mounting in a door, operate all functions (windows, locks, etc.) through their entire operating range to ensure there is no obstruction.
- Refer to the specification chart to determine the proper diameter hole to cut for your speaker model. Cutting and mounting templates can be found at www.rockfordfosgate.com.
- Mark the locations for the mounting screws. Drill the holes with a 1/8” bit.
- Feed the speaker wires through the cutout and connect them to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker’s positive terminal is indicated with a “+”.
- Fit the trim ring over the speaker and mount it into place using four (4) screws.
- Tighten the screws until the speaker is snug in place to prevent rattling. Do not over-tighten the screws.
Warranty
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
Length of Warranty
- Speakers, Signal Processors, PRIME and PUNCH Amplifiers – 1
- Year POWER Amplifiers – 2 Years
- Any Factory Refurbished Product – 90 days (receipt required)
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions. Products purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distributor and not by Rockford Corporation.
Who is Covered
This warranty covers only the original purchaser of Rockford products purchased from an Authorized Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased, and date of purchase. Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford’s discretion.
What is Not Covered
- Damage caused by accident, abuse, improper operations, water, theft, or shipping.
- Any cost or expense related to the removal or reinstallation of the product.
- Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center.
- Any product which has had the serial number defaced, altered, or removed.
- Subsequent damage to other components.
- Any product purchased outside the U.S.
- Any product not purchased from an Authorized Rockford Fosgate Dealer.
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the product.
How to Obtain Service
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for the shipment of the product to Rockford.
EU Warranty
This product meets the current EU warranty requirements, see your Authorized dealer for details.
CONTACT INFORMATION
- 600 3OUTH 2OCKFORD DRIVE
- TEMPE, ARIZONA 85281 UNITED STATES
- DIRECT: 480-967-3565
- TOLL & FREE: 800-669-9899 ROCKFORDFOSGATE.COM
Frequently Asked Questions
What are the benefits of coaxial speakers?
Coaxial loudspeakers in professional audio enable sound from two drivers to come from one source. This characteristic allows a wider field of listening to a synchronized summation of speaker drivers than loudspeaker enclosures containing physically separated drivers.
What is the difference between coaxial and 3-way speakers?
Coaxial. A 3-way coaxial speaker features a tweeter and woofer like the two- way, but it also has a mid-range driver. This means the 3-way speaker has dedicated three drivers for the mids, highs, and lows. The three drivers are in one basket, and they usually have an integrated crossover.
Do coaxial speakers need crossovers?
If your car audio system uses coaxial speakers, you probably don’t need an additional crossover. Full-range speakers already have built-in passive crossovers that filter the frequencies that reach each driver. Even if you add an amplifier into the mix, the built-in speaker crossovers should be more than sufficient.
Are coaxial speakers full range?
Coaxial speakers are often called “full-range” speakers because they reproduce a larger range of audio frequencies from a single unit. These speakers contain the same types of drivers that are found in component speakers, but they are combined to save on money and space.
What is the difference between speakers and coaxial speakers?
Component speakers have to mount everything separately due to their compartmentalized nature, but coaxial speakers manage to have a full 2-way system in just a single assembly. This is what makes them easy to install, and the time and effort saved on this also help coaxial speakers maintain a lower price point.
Do 3-way coaxial speakers need a crossover?
A three-way speaker is divided between the low-frequency driver (subwoofer) and the midrange/high frequencies drivers (tweeter). A good quality crossover is essential because it has to provide an even signal for the speakers and not cause distortion.
What is the disadvantage of coaxial speakers?
The main disadvantage of coaxial speakers is that they do not produce as high- quality sound as component speakers. Coaxial speakers cannot reproduce low frequencies, as well as component speakers can. In addition, the sound quality of coaxial speakers is often unclear.
What is a coaxial speaker connection?
A coax speaker cable provides a durable option to send professional-level audio signals from an amplifier or a receiver to speakers. Many audio systems use RCA coaxial cables to connect to an externally powered subwoofer.
Do coaxial speakers need an amplifier?
The truth is that you don’t need an amplifier for coaxial speakers. However, you’ll get even better sound, lower distortion, and potentially more enjoyment (and more volume) out of them if you use one. Car and home receivers have enough power to drive coaxial speakers with fairly good volume and clarity up to a point.
Can you put an amp on coaxial speakers?
A two-channel amp can power Two coaxial speakers; Two woofers; or, You can also bridge this amp to power a single subwoofer or two sets of coaxial speakers.
What is a 3-way coaxial speaker?
A 3-way speaker generates sound from three individual devices known as the mid-range, woofer, and tweeter drivers. Each of these owns its specific efficiency in a wide range of sound frequencies.
Are coaxial speakers better?
Coaxial speakers provide much better sound than standard low-end single-cone speakers – even those with a whizzer cone added to supposedly improve the sound. Coaxial speakers use a 2-way design where the job of producing full- range sound is split between them for best results.
Do coaxial speakers have bass?
Coaxial Speakers have the tweeter, mid-bass driver, and crossover mounted together in one space-saving speaker. They are very popular because they are much easier to install and don’t take up as much space as the component set.
Can I add a subwoofer to coaxial speakers?
However, many homes have coax running through and you may be considering if you can use coax for subwoofer wires or as subwoofer cables. Yes, you can use coaxial cables to connect your subwoofer. This is a great idea if you need to connect your subwoofer over long distances.
Can coaxial speakers have good bass?
Also, the coaxial design is notorious for IMD. … Fabulous speakers that look great and perform!… Superbly balanced sound with clean and rich vocals, textured highs, and very good bass performance for a monitor-sized passive speaker.
Download the PDF Link:Rockford Fosgate R165X3 3 Way Car Audio Coaxial Speakers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>