LD SYSTEMS WMB Swivel Wall and Ceiling Mount for Stinger G3 Models User Manual
- June 11, 2024
- LD Systems
Table of Contents
LD SYSTEMS WMB Swivel Wall and Ceiling Mount for Stinger G3 Models
Product Information
- The product is a wall/ceiling mount bracket for PA loudspeakers.
- The product comes in three models: LDEB82G3WMB, LDEB102G3WMB, and LDEB282G3WMB.
- The product is made of steel and is powder-coated black.
- The maximum load capacity of the product varies by model, with LDEB82G3WMB being able to hold up to 12kg, LDEB102G3WMB being able to hold up to 15kg, and LDEB282G3WMB being able to hold up to 22kg.
- The dimensions of the product also vary by model, with LDEB82G3WMB measuring 60 x 460 x 170mm, LDEB102G3WMB measuring 60 x 535 x 170mm, and LDEB282G3WMB measuring 60 x 763 x 170mm.
- The weight of the product varies by model as well, with LDEB82G3WMB weighing 1.1kg, LDEB102G3WMB weighing 1.2kg, and LDEB282G3WMB weighing 1.5kg.
Product Usage Instructions
- Before using the wall/ceiling mount bracket, ensure that the suitable PA loudspeaker model is compatible with the bracket model.
- Identify the appropriate location for mounting the bracket on a wall or ceiling. Ensure that the surface is sturdy and able to support the weight of the loudspeaker and the bracket.
- Use appropriate tools and hardware (not included) to mount the bracket securely onto the surface.
- Attach the PA loudspeaker onto the bracket using the appropriate hardware (not included).
- Ensure that the loudspeaker is securely attached to the bracket before using it.
- When not in use, keep the plastic and paper/cardboard packaging material and dispose of them properly.
- Plastic bags must be kept out of reach of children.
- If you have any questions regarding these instructions or any warnings, please contact your local distributor.
- If you need to request warranty service for the product, contact Adam Hall GmbH using the contact information provided in the manual.
- Properly dispose of the product separately from other waste and have it recycled to promote sustainable economic activity.
SAFETY INFORMATION
- Please read these instructions carefully before you start installation and assembly.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Observe all safety warnings. Never remove safety warnings or other information from the equipment.
- Be attentive when mounting the product and protect yourself from injury.
- This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
- Do not modify this equipment.
- Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
- Plastic bags must be kept out of reach of children.
- If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-
DECLARATIONS_LD_SYSTEMS.pdf To request warranty service for a
product, please contact Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Anspach /
Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation) This symbol on the product, or the documents accompanying the
product, indicates that this appliance may not be treated as household waste.
This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
- LDEB82G3WMB (SUITABLE FOR LDEB82G3, LDEB82AG3)
- LDEB102G3WMB (SUITABLE FOR LDEB102G3, LDEB102AG3)
- LDEB282G3WMB (SUITABLE FOR LDEB282G3, LDEB282AG3)
- Screw the U-bracket of the desired Stinger G3 speaker in a suitable position to a load-bearing wall or ceiling (A). Use suitable screws and plugs etc. to ensure secure mounting. Remove the M8 screws on the top and bottom of the speaker and lift the speaker into the bracket so that the thread locations in the speaker and the holes in the bracket are aligned. Use the supplied M8 screws and washers as shown in the figure below (B, place rubber washers between the bracket and the speaker), adjust dispersion angle as desired and tighten the screws with a suitable tool (C).
SPECIFICATIONS
- Model name: LDEB82G3WMB
- Type: PA Loudspeaker Accessories
- Part: Wall/Ceiling Mount Bracket
- Suitable for: LDEB82G3, LDEB82AG3
- Material: Steel
- Surface: Powder Coated
- Colour: Black
- Max. Load 12 kg
- Dimensions (W x H x D): 60 x 460 x 170mm
- Weight: 1.1 kg
- Model name: LDEB102G3WMB
- Type: PA Loudspeaker Accessories
- Part: Wall/Ceiling Mount Bracket
- Suitable for: LDEB102G3, LDEB102AG3
- Material: Steel
- Surface: Powder Coated
- Colour: Black
- Max. Load 15 kg
- Dimensions (W x H x D): 60 x 535 x 170mm
- Weight: 1.2 kg
- Model name: LDEB282G3WMB
- Type: PA Loudspeaker Accessories
- Part: Wall/Ceiling Mount Bracket
- Suitable for: LDEB282G3, LDEB282AG3
- Material: Steel
- Surface: Powder Coated
- Colour: Black
- Max. Load 22 kg
- Dimensions (W x H x D): 60 x 763 x 170mm
- Weight: 1.5 kg
- For further instructions, please check out the detailed online manual in the download area of this product at:: www.ld-systems.com
- Adam Hall GmbH · Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
- Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
Documents / Resources
| LD
SYSTEMS WMB Swivel Wall and Ceiling Mount for Stinger G3
Models
[pdf] User Manual
LDEB82G3WMB, LDEB102G3WMB, LDEB282G3WMB, WMB Swivel Wall and Ceiling Mount for
Stinger G3 Models, WMB Swivel Wall Mount for Stinger G3 Models, WMB Swivel
Ceiling Mount for Stinger G3 Models, Stinger G3 Models WMB Swivel, WMB Swivel
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>