ACHATE Hollywood Mirror Lamps Instruction Manual

June 11, 2024
ACHATE

ACHATE Hollywood Mirror Lamps

Product Information

The Hollywood Mirror Lamps are a set of 10 mirror lamps that provide perfect lighting for applying makeup. These lamps are easy to install and come with 20 double-sided 3M adhesive stickers for attaching them to any mirror. The lamps also come with an additional set of stickers for easy repositioning.

Product Usage Instructions

Hollywood Mirror Lamps

  1. Clean the surface well where you want to attach the lamps.
  2. Check the power connection and dimmer in advance before sticking the lamps on.
  3. Choose the spot for each lamp to create a design. Make sure there is a minimum of 10 cm and a maximum of 26 cm space between them.
  4. Remove the first layer of the supplied 3M double-sided tape under the mirror lights.
  5. Press the lamps into the desired spot on the mirror.

GENERAL

Apply your makeup perfectly with the Achaté Hollywood mirror lights. Create a real Hollywood mirror for an eye-catcher in your room. Choose from one of 3 types of light colors and adjust the light just right by dimming in 5 positions. The Hollywood mirror light consists of a set of 10 mirror lights. You easily place the bathroom lights on your mirror with the 20 double-sided 3M adhesive stickers. The handy controller also lets you adjust the lights and colors to your liking.

FEATURES

  • Set of 10 mirror lights
  • LED light
  • 3 kinds of light colors
  • Dimmable to 5 positions
  • 20 double-sided 3M adhesive stickers
  • Handy controller
  • With USB connector
  • Ideal for your makeup routine
  • Please note that the mirror is not included

EASY TO INSTAL

The makeup lamp consists of a set of 10 mirror lamps. You can attach these lamps to any mir-ror in no time using the 20 double-sided 3M adhesive stickers. A 3M sticker is already attached to the mirror lamps and an extra set of stickers is included so you can easily move the lamps around.

  1. clean the surface well.
  2. Check power connection and dimmer in advance before sticking it on.
  3. The spot you choose for each lamp, you can create a design. Make sure there is a minimum of 10 cm and a maximum of 26 cm space between them.
  4. Remove the first layer of the supplied 3M double-sided tape under the mirror lights, and then press it into the desired spot.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals