MiRiDER GB3 Folding Electric Bike Instruction Manual

G13
BEFORE YOU BEGIN
PLEASE READ CAREFULLY BEFORE RIDING YOUR MIRADOR
Instruction Manual

BEFORE YOU BEGIN

Thank you for purchasing your MiRiDER One GB3 folding bike. Please read this guide carefully before using the bike for the first time as it contains important safety, performance, and service information. Keep it safe during the lifespan of your bicycle.
Your bike has been carefully assembled by our build technicians and once the handlebars have been fitted, the bike opened out, and switched on, you will be ready to ride.
You will notice a small amount of distance showing on the computer screen odometer, which represents the pre-delivery inspection tests we carry out.
The battery will come pre-charged and is already inserted into the frame for your convenience.
Two keys are provided for the battery frame lock, and they are secured to the wire near the brake lever (please do not lose these). Be careful when removing all the packaging, so as not to damage the paintwork. Please retain the packaging for a short while until you have tested that the bike is functioning correctly.
Here you will find a guide to all the features and functions, and we advise that you familiarise yourself with your new bike before riding.

Bike structure & functions

1. Telescopic stem
2. Thumb throttle (right-hand side)
3. 3 Speed gear shifter
4. LCD color display
5. Canbus waterproof connectors
6. Stem folding mechanism
7. LED headlight| 8. Magnesium fork
9. Disc brakes
10. Magnesium frame
11. Frame folding mechanism
12. CNC pedals
13. 3 Speed gearbox
14. Drive belt| 15. All-terrain tires
16. 250W motor hub
17. Mudguards
18. Shock absorber
19. Seat post clamp
20. Telescopic seat post
21. Ergonomic seat
---|---|---

BIKE ASSEMBLY INSTRUCTIONS

Once you have removed the bike and all of the delivery packaging, you are ready to unfold the bike.

Securing the frame

Connect the two halves of the frame together and secure by pushing the black locking handle into position firmly until you feel it click into its locked position.

Securing the stem

|
---|---
Lift the handlebar stem upwards, until it sits flat on the headset in the upright position.| Secure the hinge by pressing the black lever into the stem firmly, until you hear it snap shut.

How to insert the seat

|
---|---
Open the seat clamp, as shown in the image above.| Push the seat into the frame to the minimum insertion mark on the seat post, then secure the seat post by closing the seat post clamp.

Once you have adjusted the handlebar stem and seat height to your liking, you can turn the power on, as seen in the image to the side. To adjust the power level, simply use the UP and DOWN arrows. Cycling through the different menu screens can be done by pressing the ON/OFF button quickly.

Power on

A simple press of the power button will turn the bike on. Hold to turn off.| Connect the charger to the port if the LCD screen does not activate.

To see all our ‘how to’ videos, please scan here

https://www.youtube.com/watch?v=5FrMJTvTabk&list=PLsdzEIVz5N6bULgwMEF37cpqHMKq6OQN9&index=10&t=2s

HANDLEBAR FITTING INSTRUCTIONS

To fit the handlebars & LCD display screen, please follow these 72 simple steps

the post
|
Remove the handlebar clamp| Reinsert the clamp handle & bolt making sure the brass washer is orientated correctly
|
Tighten the bolt by small amounts until the clamp level is firm – do not overtighten| Remove screen mounting clamp screws
|
Remove mounting clamp spacers| Gently open the mounting clamps and place them over the handlebars
|
Insert the four mounting blocks between the clamp and the handlebars| Refit the clamp mounting screws – do not overtighten
|

LCD DISPLAY INSTRUCTIONS

Switch the front light on
Once the bike is powered up, press and hold the ‘up’ button for two seconds. Repeat to turn off.
Reset the trip computer
Once the bike has been powered up for more than S seconds, press and hold the ‘up’ and ‘down’ buttons together until the screen flashes, then press the central power button once.

The display content is shown as follows:

1 Power assistance level
2 Throttle engaged
3 Riding speed
4 Average speed Maximum speed
5 Battery capacity indicator
6 Battery voltage| 7 Brake on
8 Headlight Indicator Display backlight
9 Ambient temperature
10 Power display
11 Trip distance Total distance
12 Single trip time Total tri time
---|---

GEAR CHANGE TIPS

1. Shifting between the 3 gears is instant and can be done at standstill or when moving.
2. When changing down gears you will need to release pedal pressure to ensure a smooth change.
3. Ensure when using the twist grip this is turned precisely to the gear number required.
4. Follow the maintenance schedule shown in the full online manual.
5. Belt tension is pre-set at the factory. Under extreme load, it is normal for the drive belt to slip. This is in order to protect the gearbox from excessive forces.

GENERAL TIPS
With an e-bike, it’s good to know how far you can go without running out of battery. There are many variables that can increase, or reduce, your expected range, but until you get a handle on this for yourself, here are some tips before your first ride. We know over 30 miles is possible with one charge, based on our testing on a flat ride, on power level 1/2, and with an 85kg rider:

1. Make sure the battery is fully charged (when the light is green on the charger).
2. Make sure the tire pressures are sufficient. Our technicians supply the bike to you with the tires inflated to the maximum psi as stated on the side wall of the tire. This keeps the tire drag, or friction on the road, to a minimum, therefore, increasing battery range.
3. Reduce the power level when on flat roads where minimal rider effort and assistance are required.
4. Coast where possible. 5) The battery charge capacity will improve after the first two full charges.
5. When walking with the bike, ensure it is in power level 0 to avoid accidental activation of the power assist should the pedals rotate.
6. Even when the battery indicator on the controller shows one bar remaining, there could still be plenty of range left. The battery will be low when there are no bars remaining.

Within the first few charges, the battery indicator symbol may show only 1 bar, even after a full charge. This means the battery monitor system needs resetting. To do this, simply ride the bike with assistance for 5-10 seconds
Generally speaking, riding with correctly inflated tires on a lower power level will extend the battery’s range. As well as a lighter rider on a flatter route.
Note: cold weather can reduce battery range.

Developed and assembled in the UK

FULL MANUAL
Our full manual can be downloaded from our website using this link:
minder.co.uk/user-manuals
Or scan this QR code with a smartphone.

https://mirider.co.uk/user-manuals/

CONTACT US
If you require any assistance with your bike, during setup, or after your first few rides, please don’t hesitate to contact your retailer.
SEARCH ‘MiRiDER UK’

mirider.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>