OMNITRONIC KEY-2816 MIDI Controller User Guide
- June 11, 2024
- OMNITRONIC
Table of Contents
KEY-2816 MIDI Controller
User Guide
KEY-2816
QUICK STARThttps://www.omnitronic.com/download/11045082-144887.pdf
KEY-2816 MIDI Controller
Welcome
Thank you for choosing this ultra-compact MIDI controller. This Quick Start
will show you how to set up and use the controller. Users of this product are
recommended to carefully read all warnings in this manual in order to protect
yourself and others from damage.You can get the full user manual online as a
PDF. To do so, simply scan the QR code on the title page.
Introduction
This MIDI controller is used to control music software. The device does not produce sound unless it is connected to a computer or other external MIDI device. This is because it does not produce sound itself and only sends MIDI data when you play it. Instead, it controls a virtual instrument on your computer or a MIDI sound module to produce sounds. The controller can be connected to PC and Mac computers. An OTG converter cable is required to connect to mobile phones and tablets. For Apple, use the Lightning to USB 3 camara adpater.
Setup
-
Connect the controller to the computer using the supplied USB cable. This will power up the device. Selfpowered USB hubs can be used, but other devices with USB 3.0
will cause problems. -
Select the device as MIDI controller within your DAW and you are ready to go!
Device settings in your DAW
To select your controller as a MIDI controller for your digital audio
workstation (DAW):
- Connect the controller to the computer via USB cable.
- Open your DAW.
- Open the preferences, options, or device setup of your DAW. Set up the device as a hardware controller. The controller can now communicate with your software.
- For more information on the controller’s mapping settings for the DAW, see the full user guide online.
System requirements
Windows 10 / 8 / 7 / XP / Vista
Mac OS X 10.3.9 or higher
Important notes
- Please read these operating instructions carefully before using the product. They contain important information for the correct use of your product. Please keep them for future reference.
- Only use the product according to the instructions given herein, to avoid accidental injury or damage. We do not assume any liability for material and personal damage caused by improper use or non-compliance with these operating instructions. In such cases, the warranty will be null and void.
- Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the warranty invalid.
- This product is not a toy. Keep it out of the reach of children. Do not leave packaging material lying around carelessly.
- IMPORTANT: This product is not an outdoor product! Only for indoor use! Do not use this device near water.
- Protect the product against excessive humidity and heat. The recommended temperature is -5 to +45°C.
- This product is maintenance-free, except for occasional cleaning. You can use a slightly dampened cloth for cleaning.
- If this product is no longer working properly or is visibly damaged, take it out of operation and consult your local dealer. Do not attempt to repair the product yourself.
| PROBLEM | CAUSE | SOLUTION |
|---|---|---|
| The display/LEDs do not light up | No power | Please make sure that the |
controller is properly connected to a USB port ony your computer the computer
is powered on. Sometimes another USB cable or computer is needed to determine
if the USB cable is working Me.
No sound from your controller| Your controller is a MIDI controller. with
means that it does not contain any sounds inside.| Please make sure that your
controller is connected to you computer or hardware sound module.
No sound from target device| Your controller is not properly connected.| Check
your computer’s USB connection to confirm that your controller is recognized.
If necessary repluo the USB cable and restart your computer.
Your controller was connected after software application has started.| If
controlling an external hardware module, make sure that your
controller’s MIDI OUT is connected to the device’s MIDI IN pod.
Problem is caused by use of a USB hub.| Unplug your controller from the USB
hub and connect it directly to your computer.
Software application not set to receive MIDI data from your controller.|
Ensure that your controller is listed as an active MIDI source in your
application. Usually, the MIDI settings can be accessed through the
application’s Preferences menu.
Your controllers MIDI channel is not the same as application’s incoming MIDI
channel.| Make sure that your controller is sending MIDI information on the
channel that the target device expects.
Keys/Pads/Knobs/Slide not work| Keys/Pads/Knobs/Sliders not set to mapping to
your DAW.| Please make sure you have set your controller to map to your DAW
manually. For more mapping info please visit the download the full user manual
online.
Drivers fail to install| is a problem blem with the computer’s USB port.| Your
controller is driver-free device, so basically no driver is required for this
device. Please try to use your controller on a nether USB port or even on
another computer.
Your controller fails to connect to computer| Fail to connect to computer.|
Check your computers USB connection to confirm that your controller is
recognized.
Sustain Pedal not working when
connected to Pedal A jack| Pedal A jack is not assigned to Control No. 64
which is the function of sustain pedal.| Assign the Pedal A jack to Control
No. 64 when connecting your sustain pedal to it.
Knob 5 is not working with the software application as other knobs| Knob 5 is
not set to General MIDI Controller which is required to be compatible with
software applications.| Default setting for Knob 5 is Program Change. Assign
Knob 5 to General MIDI Controller first before using it for other functions in
the software application.
Your controller is not working properly with software applications| Mapping
settings of the controller for the software application are not complete.|
Your controller is compatible with any software (e.g. Cubase. FL Studio.
Bitwig, Ableton Live. Studio One. Nuendo. Protools. Logic Pro. Analog Lab)
which supports the MIDI protocol. Please consult your specific hardware or
software device’s documentation for instructions on enabling your controller
as a MIDI input device.
Volume slider doesn’t change the volume in the software application| Volume
slider is not set to General MIDI Controller which is required to be
compatible with software applications.| Default setting for volume slider is
Master volume. Assign the volume slider to General MIDI Controller first
before using it to control the volume in the software application.
Disposal
**** When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information.
Manufacturer declarations
© 2022 Omnitronic All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner. All product names and trademarks mentioned herein are the property of their respective owners. They are not connected to Omnitronic in any way. The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. Omnitronic shall have no liability for any error or damage of any kind resulting from the use of this document.
Connections
Computer
The controller is buspowered, so it turns on as soon as you connect it to your
computer with a USB cable.
iOS
devices
To operate the controller with an iOS device, use Apple’s Lightning to USB 3
Camera Adapter with a separate 2.4A Lightning charger.
Android devices
To operate the controller with an Android device we’d like to recommend a USB
OTG to USB adapter.
Stand-alone operation
The 3.5mm TRS MIDI Out port can be used to connect the controller to a
hardware sequencer, an external synthesizer or sound module. If you want to
use the 3.5mm TRS
MIDI output without a computer, you can power the unit with standard USB
power. 