ASUS E21528 ROG RAIKIRI Pro Wireless Gaming Controller User Guide
- June 11, 2024
- Asus
Table of Contents
E21528 ROG RAIKIRI Pro Wireless Gaming Controller
User Guide
Device features
Top view
Bottom view
- ROG Aura RGB LED
- Joystick
- View button
- Hybrid D-pad
- Xbox button
- USB Type-C® port
- OLED Display
- Controller status indicator
- Share button
- Menu button
- ABXY buttons
- Microphone mute and Pairing combo button
- Bumpers (LB/RB)
- Triggers (LT/RT)
- Step trigger switches
- Multi-functional rear buttons (M1/M2/M3/M4)
- 3.5mm headphone jack
- USB Dongle with cover
- OLED control button L/R
Enabling/Disabling Selectable Step Triggers
You can enable the switches to shorten the travel distance of the left and right triggers by sliding the switches outwards. To go back to full trigger mode, simply slide the switches inwards.
Getting started
- Connect to PC Via wired connection
1. Connect your controller to the PC with the bundled USB Type-C® cable.
2. Turn on the OLED on your controller, and then go to System > PC > USB.
3. The indicator LED flashes white first, then turns solid white indicating that the controller has been connected to the PC successfully.
Via 2.4Ghz
1. Open the dongle cover on the back of the controller to pick up the bundled USB dongle.
2. Insert the USB dongle into an available USB port on your PC.
3. Press the Xbox button on your controller to power it on.
4. Turn on the OLED on your controller, and then go to System > PC > RF 2.4Ghz.
5. The indicator LED flashes white first, then turns solid indicating that the controller has been connected to the PC successfully.
Via Bluetooth
1. Press the Xbox button on your controller to power it on.
2. Turn on the OLED on your controller, and then go to System > PC > Bluetooth. The indicator LED flashes white slowly.
3. Press and hold the pairing button for over 3 seconds until the indicator LED flashes rapidly white
NOTE: Your controller will automatically pair with the previously paired PC.
4. Find the Bluetooth icon on the task bar on your PC then click Add a deviceROG RAIKIRI PRO > Finish.
5. The indicator LED flashes white first, then turns solid white indicating that the controller has been connected to the PC successfully.
6. Execute the driver for installation.
NOTE: Download and install the driver from https://rog.asus.com/controllers/rog-raikiri-promodel/helpdesk_download/.
| Controller Status | Indicator color |
|---|---|
| Powered off, Not connected | Off |
| Waiting for auto pairing | Blinking white slowly |
| Waiting for pairing | Blinking white quickly |
| Connected / Paired | Solid white |
NOTE: In wireless connection mode, you can turn off your controller by pressing the Xbox button for over 6 seconds until the indicator is OFF.
-
Connect to Xbox console machine 1. Turn on the OLED on your controller, and then go to System > Xbox.
2. Connect your controller to the Xbox console machine with the bundled USB Type-C® cable.
3. Press the power button on the Xbox console machine to turn it on, then your controller will connect to the Xbox console machine automatically. -
Customize your controller
1. Download and install the Armoury Crate software from https://www.asus.com/supportonly/Armoury%20Crate/HelpDesk_Download/.
2. Customize your controller using Armoury Crate. -
(Optional) Connect to headphone
When a 3.5mm headset is connected, the microphone is muted by default. You may unmute it by pressing the mute button.
NOTE: The audio function is supported only on USB mode.
| Microphone Status | Indicator color |
|---|---|
| Mute (Default) | Amber |
| Unmute | Off |
Using OLED
| Function | Action |
|---|---|
| Open the OLED display menu | Press and hold the R button over 2 seconds |
| Close the OLED display | Press and hold the L button over 2 seconds |
| Move down on the current menu | Press the R button |
| Move back to the previous page | Press the L button |
| Activate the settings and move to the next page | Press and hold the R button |
over 2 seconds
Menu| Description
---|---
Profile| Allows you to select the profile from Armoury Crate
Wallpaper| Allows you to select the wallpaper from Armoury Crate
System| Allows you to select the platform your controller connects to and its
connection mode
Status| Displays the Profile name/ battery status / Platform/Connection mode
Screen off time| Allows you to select the time your OLED screen would be
activated
(15sec / 30sec/ 1min / 2min / 5min )
Screen brightness| Allows you to select a brightness level for the OLED screen
Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F). When
the device exceeds the maximum temperature, unplug or switch off the device to
let it cool down.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other
liability, you are entitled to recover damages from ASUS. In each such
instance, regardless of the basis on which you are entitled to claim damages
from ASUS, ASUS is liable for no more than damages for bodily injury
(including death) and damage to real property and tangible personal property;
or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed
contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims
based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum
for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The use of shielded cables for connection of the monitor to the
graphics card is required to assure compliance with FCC regulations. Changes
or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This equipment complies with FCC/ISED radiation exposure limits set forth for
an uncontrolled environment.
End user must follow the specific operating instructions for satisfying RF
exposure compliance.This transmitter must not be co-located or operating in
conjunction with
any other antenna or transmitter.
- The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.
RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an
uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation,
Science and Economic Development Canada (ISED) radio frequency exposure
limits. The Wireless Device should be used in such a manner such that the
potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the ISED RF
Exposure limits under portable exposure conditions. (antennas are less than 20
cm of a person’s body).
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer’s instructions.
Proper disposal
DO NOT throw the device in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. The symbol of the crossed out
wheeled bin indicates that the product (electrical, electronic equipment and
mercury-containing button cell battery) should not be placed in municipal
waste. Check local regulations for disposal of electronic products.
DO NOT throw the device in fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.
ASUS Recycling/Take back Services
ASUS recycling and take back programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for detailed recycling information
in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm.
ASUS contact information
ASUSTeK COMPUTER INC.
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
Telephone: +886-2-2894-3447
Fax: +886-2-2890-7798
Web site: https://www.asus.com
Technical Support
Telephone: +86-21-38429911
Online support: https://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Telephone: +1-510-739-3777
Fax: +1-510-608-4555
Web site: https://www.asus.com/us/
Technical Support
Support fax: +1-812-284-0883
Telephone: +1-812-282-2787
Online support: https://qr.asus.com/techserv
Manufacturer
ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
E21528
First Edition
March 2023
Copyright © ASUSTeK Computer Inc.
All Rights Reserved