SwitchBot W1001000 Solar Panel User Manual
- June 11, 2024
- SwitchBot
Table of Contents
SwitchBot W1001000 Solar Panel
Package Contents
Product Specifications
- Model Number: W1001000
- Color: White / Black
- Material: ABS plastic with UV-Resistant coating
- Product Size: 72 x 165 x 25 mm (2.83 X 6.49 X 0,98 in)
- Product Net Weight: 100 g (3.53 OZ)
- Power Connection: 55 cm USB Type-C cable
- Set-up Requirement: Direct sunlight (without coverage)
- Output: 5 V = 250 mA
- Operating Conditions: -20 °c to 60 °c (-4 °F to 140 °F) /10to90%RH
Name of Parts
Stick on Your Curtain
If the solar panel cannot receive direct sunlight due to its position, you can use the built-in cable to connect the solar panel and SwitchBot Curtain. You can also use double-sided tape and magic tape to stick it onto the back of your curtain.
- Open the case at the back and take out the cable.
- Firmly stick 3 pieces of magic tape with double-sided tape on the back of the solar panel and wait for 5 hours for optimum adhesion.
- Put another piece of magic tape with double sided tape onto the back of your curtain, make sure to do the two steps below:
- Expose under direct sunlight and
- Confirm its distance to be less than the length of the SwitchBot Curtain’s cable, wait for 5 hours to achieve optimum adhesion.
- Stick the solar panel onto the curtain and connect the cable properly.
Install on SwitchBot Curtain U Rail.
Note: Your SwitchBot Curtain should already be installed on your curtain track by now
- Take out the two stands
- Insert the stands into from the case. the gaps of Switch Bot Curtain’s hook, make sure the solar panel is securely hung.
- Installation completed.
- Connect the Type-C O cable to SwitchBot Curtain.
Install on SwitchBot Curtain (Rod Type)
Note: Your Switch Bot Curtain should already be installed on your curtain track by now.
- Take out the two stands
- Insert the stands into from the case. the gaps of SwitchBot Curtain’s hook, make sure the solar panel is securely hung.
- Installation completed.
- Connect the Type-C O cable to Switch Bot Curtain.
Install on SwitchBot Curtain (I Rail Type)
Note: Your Switch Bot Curtain should already be installed on your curtain track by now.
- Takeoutthetwostands
- Insert the stands into from the case. the gaps of Switch Bot Curtain’s hook, make sure the solar panel is securely hung.
- Installation completed.
- Connect the Type-C O cable to Switch Bot Curtain.
Return and Refund Policy
This product has one-year warranty (start from the purchasing day).
The situations below do not fit the Return and Refund Policy:
- Intended damage or abuse.
- Inappropriate storage (drop down or soaking in water).
- Modify or repair of product.
- Natural wearing of product.
- Natural disasters.
Warning: Please avoid dropping or any forms of physical damage to the product.
Contact and Support
If you have any concern or problem when using our products, please kindly send feedback from the Profile > Feedback page in the Switch Bot app.
CE Warning
- Manufacturer’s Name: Woan Technology (Shenzhen) Co., Ltd.
- Sample Description: S witchBot Solar Panel
- Trade Mark: Switch Bot
- Model number: W1001000
- Operating Temperature: -20°C-60°C
This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the device, including the antenna. Use only the supplied or approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- The device complies with RF specifications when the device used at 20cm from your body.
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radionv technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC RF exposure statement:
The equipment complies with FCC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.