DGSHAPE DWX-53DC 5 Axis Dry Dental Milling Machine with Automatic Disc Changer Instruction Manual
- June 11, 2024
- DGSHAPE
Table of Contents
DGSHAPE DWX-53DC 5 Axis Dry Dental Milling Machine with Automatic Disc Changer Instruction Manual
Make sure to Remove the Retainers
- Four retainers are attached to this machine to protect it from vibration during shipment. After installing this machine, remove all the retainers. Switching the power on with retainers attached to this machine may cause faulty operation or a breakdown.
- The retainers will be required when moving the machine to a different location. Store them carefully so that they do not get misplaced.
Mounting position of retainers
The following image shows the positions where retainers are attached. For details on how to remove retainers, see “Removing the Retainers” in the Setup Manual.
Company names and product names are trademarks or registered trademarks of
their respective holders.
https://www.dgshape.com/
Copyright © 2022 DGSHAPE Corporation
R1-220513T
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>