eufy D605 Dog Camera User Guide
- June 11, 2024
- Eufy
Table of Contents
D605 Dog Camera
User Guide
Dog Camera D605 / eufy Pet Camera Lite N140
Anker Innovations Limited. All rights reserved. eufy Pet and eufy
Pet Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
PRODUCT OVERVIEW
-
Treat Container Lid
-
Camera
-
Speaker
-
Microphone
-
Treat Launching Port
-
Residue Lid
-
Status LED
– Blue: Connected.
– Flashing red: Disconnected.
– Flashing blue: Connecting / Someone is watching live video / Recording a video.
– Green: Starting or restarting the system.
– Green for 10 seconds: Launching treats. -
Treat Container
-
SYNC Button
-
Release Button: Press and hold to take out the treat container.
POWERING
Connect the device to power with the power port on the bottom.
ADDING TO EUFY PET APP
- Download and install the eufy Pet app, then sign up for an account.
- Scan the QR Code on the bottom using the eufy Pet app and follow on- screen instructions to complete the setup.
REGULAR MAINTENANCE
- Clean treat container regularly.
- Remove residue regularly: remove the lid and pour out residue.
NOTICE
The adapter shall be installed near the equipment and shall be easily
accessible. Do not use the Device in the environment at too high or too low
temperature, never expose the Device under strong sunshine or too wet
environment. The suitable temperature for the product and accessories is 0°C
to 40°C (32°F to 104°F).
When supplying, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to supply the device in an environment with a temperature
that ranges from 5°C~25°C (41°F to 77°F).
Please ensure to use only the adapter offered by the manufacturer. Using
unauthorized adapter may cause danger and violate the authorization of the
projector and the guarantee article.
The adapter is for indoor use only. The rated output voltage/current of the
adapter is 12VDC/2A for T7200 and 12VDC/1A for T7203. The plug of adapter
considered as disconnect device. Your product is designed and manufactured
with high quality materials and components, which can be recycled and reused.
Notice (United States Of America)
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can bedetermined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: (1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and receiver. (3) Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. (4)
Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement The device has been evaluated to meet
general RF exposure requirements. The device can be used in fixed/mobile
exposure condition. The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party Company Name: POWER MOBILE
LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004
Telephone:1-800-988-7973
Customer Service
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973
United Kingdom
+44 (0) 1604 936 200
Germany
+49 (0) 69 9579 7960
Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Songkok, Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>