eufy T8970 Outdoor Indoor Siren User Guide
- June 11, 2024
- Eufy
Table of Contents
T8970 Outdoor Indoor Siren
User Guide
QUICK START GUIDE
Outdoor / Indoor Siren
T8970 Outdoor Indoor Siren
Anker Innovations Limited. All rights reserved. deify Security and deify
Security Logo are trademarks of Anker Innovations Limited, registered in the
United States and other
countries. All other trademarks are the property of their respective owners.
AT A GLANCE
INSTALLING THE BATTERIES
Remove the battery compartment cover of Siren and insert the provided batteries.
- Twist the battery compartment cover clockwise.
- Insert the batteries into the slots.
ADDING SIREN TO YOUR SYSTEM
- Download the deify Security app from the App Store (iOS devices) or Google Play (Android devices).
- Tap Add Device, choose Siren, then select a Home Base to link the sensor to. Make sure you’ve already setup your deify Security Home Base and updated the firmware to the latest version.
- Press and hold the SYNC button for 3 seconds until the LED indicator blinks blue. This means Siren is ready to pair.
- The LED indicator will turn solid blue for 5 seconds, which indicates the pairing has been successful. Then follow the in- app instructions to complete the setup.
MOUNTING SIREN
Choose a Location
Siren can be installed on an indoor or outdoor wall. To extend the reach of
Home Base’s sound, you can install Siren where the sound of HomeBase doesn’t
reach.
Mount Siren
- Remove the rubber plugs from Siren’s bracket.
- Install Siren’s bracket on the wall with the screws provided.
- Reinstall the rubber plugs.
- Position Siren on its bracket and twist clockwise to align the marks on the edge.
SAFETY
The recommended temperature range for devices and accessories is -10°C to 40°C
(14°F-104°F).
Unless specifically indicated that it is safe to do so in the user guide or
instruction manual, do not use this device in an environment that exceeds the
recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user guide or
instruction manual, avoid exposing your device to direct sunshine or
excessively wet environments.
CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF
USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS.
Warning:
- Replacing a battery with an incorrect type may bypass safeguards and create danger;
- Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
- Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
- A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases.
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition.
The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004
Telephone:1-800-988-7973
IC Statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
This product complies with the radio interference requirements of the European
Community.=
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.For the declaration of conformity, visit the Web site:
https://uk.eufylife.com.
****This product complies with the radio interference requirements of the
United Kingdom
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following internet address:
https://uk.eufylife.com.
RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that maintain
a 20cm distance between the device and human body.
Frequency bands and power as below:
SUB-1G Frequency Range:866~866.8MHz ; Sub-1G Max Output Power: 12.297 dBm
The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich,
Germany The following importer is the responsible party (contract for UK
matters): Anker Technology (UK) Ltd I GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
Customer Service
Service client Servitor client
12-month limited warranty
(US) +1 800-988-7973
(UK) +44 (0) 1604 936200
support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
@Unofficial
@EufyOfficial
@EufyOfficial
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>