Saramonic Blink500T2 2.4GHz Dual Channel Wireless Microphone User Manual

Saramonic Blink500T2 2.4GHz Dual Channel Wireless Microphone

Statement

Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: info@saramonic.com

Cautions

1. Disintegration of this device by non-professionals is strictly prohibited.
2. Please keep it away from heat sources such as heaters or ovens.
3. Do not remove the battery without professionals’ help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please keep away from the dust and moisture.
6. For the best pick-up pattern, do not hold your hand against the microphone capsule cover.

General Introduction

Adopted 2.4GHz wireless transmission technology, the Saramonic Blink500T2 is an incredibly lightweight and easy-to-use wireless microphone system for up to 2 people, delivering exceptional, broadcast-quality sound. With built-in rechargeable batteries, Blink500T2 TX and Blink500T2 RX of the series provide long battery life for your recordings (up to 12 hours for TX; 14 hours for RX). The clip-on kit allows you to easily clip it on your shirts and clothing for use. Its unobstructed operating range can reach up to 100 metres. Featuring capabilities of mute and noise cancellation, the small and light TX transmitter has a built-in omnidirectional microphone and with 360-degrees of sound pickup. Included SR-M1 professional lavalier microphone also can be used as a traditional bodypack transmitter. BlinkS00T2 TX is ideal for capturing natural-sounding dialog for video productions, interviews, speech, and many other applications. The dual-channel RX receiver features a selectable Mono/ Stereo output setting. A 3.5mm headphone jack is available for real-time monitoring, and the 3.5mm TRS output makes the unit compatible with smartphones, tablets, computers, DSLR, mirrorless, camcorders, recorders, mixers and more. No technical knowledge of audio is required to operate. The Blink500T2 system operates on the interference-free 2.4GHz spectrum and automatically hops to free channels to avoid static noise and audio dropouts.

Packing List

Other Adapter Cables (sold separately)

Product Structure

Blink500T2 TX: Clip-on Transmitter with Built-in Microphone

1. Power Button

   • Status Indicator Note: Please charge the transmitter in time when in a low battery status, or it will auto shut off within 10 mins.

   • +· I NR Button

   • Press+/- button to adjust mic gain(totally i levols) Th& sotting is ,e-tainod ,ovon afte-, the power is turned off.

   • Press and hold or continuously press”+”/”·” to adjust mic gain to maximum/ mmimum level, the indicator blinks blue twice rapidly,

   • Press the NR button (press both”+” and n _., bvttons at the- same time) to turn on/off noise cancellation. Default setting is off.

   • Mic in Jack
     It can be connected to a 3.5mm TRS microphone such as th8 induded la11<1l18r microphone,

   • USB-C Charging Port (DC SV)
     UM lhe wpplied US8 C charging Clble to charge the un-t.

   • Built-in Microphone

   1. Belt Clip
      Blink500T2 RX: Oip-on and Shoe-Mountable Receiver

Power Button

• Status lndicotor Note: Please charge the receiver in time when in a low battery status, or it will auto shut off within 10 mins,

• Mono/Stereo Switch
  The output mod.- Colft be set to mono Of ,,.,eo. When the output mode is in mono, the audio from the left and right channel will be muied. When in stereo, the transmitters’ audio output will be :separated to the loft and right of the itereo outpuL

• © USB-C Charging Port (DC SV)
  Use 1he suppl,od US8-C cha<gong cable to cha<ge the unit_

• LINE OUT Jack
  Connect the Bl1nkS00T2 RX to a DLSR camera, ,matt:phooe, computer, moi:er or ampltf1tr w,th the appropriate output able_

• @ 3.5mm Headphones Output
  Connect a he•dphone to monitor the •ud10 ootput

Belt Clip

Operation Guide

1. Long press the power button for 2 seconds to turn on the transmitter and the receiver.

2. Pairing
   Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow below steps:

3. Long press the power button of TX and RX for 5 seconds in shutdown mode. They will enter the pairing mode and the indicators of both blink blue 3 times rapidly.

4. The transmitter and receiver will be successfully paired within 10 seconds. The indicato,s of both light up static blue.

5. Connect the receiverto the mic input of a camera, recorder or mixer with the supplied 3.5mm TRS to TRS cable; or connect it to a smartphone, tablet, or computer with the supplied 3.5mm TRS to TRRS cable.

6. You are ready to record.
   NOTE:

7. If a cenain transmitter of Blink500T2 failed to pair, please turn off
   the paired transmitter, and then reconnect the unpaired transmitter and receiver.

8. Due to the 2.4GHz wireless frequency is widely used, the signal may be easily attenuated or interfered. Please try to avoid obstacles while using, such as walls and buildings. And keep away from the devices with 2.4GHz frequency, such as high-power Wi-Fi antennas, radios, etc.

Specifications

For better recording experience, the application SmartRecorder is recommended.

Scan the OR code and follow us!
Shenzhen Jlayz Photo lndustfial ,, Ltd A16 Bu Id ng, Intelligent Tei’minal lndusltial Paik of s,
1icon valley Pc:w1et,
Gusnlan,
Longhua District.
Shenzhen,
China
400-613-1096
www.saramonic.com
info@saramonic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>