Laney LA30BL Tube Guitar Amplifier User Manual

Laney LA30BL Tube Guitar Amplifier

Product Information

The LA30BL is a product manufactured by Black Country Customs. It is a device that can be turned on and has settings that can be adjusted between 0 and 5. The product is identified by model number LA30BL 1 212.

Product Usage Instructions

1. To turn on the LA30BL, press the ON button.
2. The device has settings that can be adjusted between 0 and 5. Use the buttons labeled 1 and 2 to adjust the settings.
3. The HT setting can be adjusted by using the button labeled HT.
4. The device has various indicators that will display based on the current settings. Refer to the user manual for more information on these indicators.
5. For any further information or assistance, refer to the user manual provided by Black Country Customs.

IMPORTANT SAFETY INSTRUCTIONS

Intended to alert the user of the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product. Risk of electrical shock – DO NOT OPEN. To reduce the risk of electrical shock, do not remove the cover. No user serviceable parts inside. Refer servicing to qualified personnel.

CAUTION
To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance please read the operating instructions for further warnings.

WARNING: When using electrical products, basic cautions should always be followed, including the following:

1. Read these instructions.

2. Keep these instructions safe.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9. An apparatus with Class I construction shall be connected to a mains socket outlet with a protective connection. Do not defeat the safety purpose of
   the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third
   grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
   replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.

11. Only use attachments/accessories provided by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution
    when moving the cart/apparatus combination to avoid injury from tip-over.

13. The mains plug or appliance coupler is used as the disconnect device and shall remain readily operable. The user should allow easy access to any
    mains plug, mains coupler and mains switch used in conjunction with this unit thus making it readily operable. Unplug this apparatus during lightning
    storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when powersupply
    cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
    does not operate normally, or has been dropped.

15. Never break off the ground pin. Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.

16. If this product is to be mounted in an equipment rack, rear support should be provided.

17. Note for UK only: If the colours of the wires in the mains lead of this unit do not correspond with the terminals in your plug, proceed as follows:

    • The wire that is coloured green and yellow must be connected to the terminal that is marked by the letter E, the earth symbol, coloured green or
      coloured green and yellow.

    • The wire that is coloured blue must be connected to the terminal that is marked with the letter N or the colour black.

    • The wire that is coloured brown must be connected to the terminal that is marked with the letter Lor the colour red.

18. This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus.

19. Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time.

The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures:

According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.

FCC COMPLIANCV STATEMENT

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference CE
2. This device must accept any interference received, that may cause undesired operation.

Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.

Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This product conforms to the requirements of the following European Regulations,

Directives & Rules:
CE Mark (93/68/EEC), Low Voltage (2014/35/EU), EMC (2014/30/EU), RoHS (EU2011/65/EU), ErP (2009/125/EU).
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.

LA30BL Spec:

• Supply Voltage

  • 100V,
  • 120V,
  • 220-230V,
  • 240V 50/60Hz
  • Factory Option
    (adjustments may be made by qualified Laney approved service personel only)

• HT Fuse

  • T500mA L

• Power Consumption (Max)

  • 150W

• Output Power Rating

  • 30W RMS Continuous

Input jacks:

• Bass/Treble channel socket 1
  • Input impedance 1 MOhm
  • Sensitivity: 15mV
• Bass/Treble channel socket 2
  • Input impedance 140KOhms
  • Sensitivity: 30mV
• Loudspeaker Outputs
  • 116 Ohm/ 18 Ohm/ 1* 4 Ohm
• Features
  • Bass Channel
  • Treble Channel
  • Presence Control
  • Bass, Middle & Treble Controls
  • Gain Control
  • Rugged Plywood Carcass
• Dimensions (HWD)(mm)
  • 220
  • 620
  • 220
• Weights
  • Unit 10.5Kg, Packed 12.5Kg

Laney Electonics Ltd

LA30BL block diagram

In the interests of continued product development. Laney & Black Country Customs reserves the right to amend product specifications without
prior notice

WWW.BLACKCOUNTRYCUSTOMS.CO.UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>