Laney LA212 50-Watt 2×12 Inch Guitar Speaker Cabinet User Manual
- June 11, 2024
- Laney
Table of Contents
Laney LA212 50-Watt 2×12 Inch Guitar Speaker Cabinet
LA212 – User Manual
The LA212 is a guitar speaker cabinet manufactured by Laney Electronics Ltd. It is designed to deliver high-quality sound for guitarists in live performances or studio recordings.
Specifications
- Power RMS : 50 Watts RMS
- Inputs: 1 x 6.3mm jack socket
- Impedance : 8 Ohms
- Drivers : 2 x Celestion G12M-25 Greenbacks (16 Ohms)
- Cabinet Design : Plywood Construction, vintage styling, offset 2 x 12 loading. Rubber feet, Removable castors.
- Weight : Unit weight 26kg, packed weight 28.5 Kg
Important Safety Instructions
- Read the instructions carefully before installing or operating this product.
- Keep these instructions for future reference.
- Retain these Instructions.
- Comply with Warnings: All warnings and instructions for these products should be adhered to.
- Caution : These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid excessive levels that can cause permanent hearing damage.
- Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time.
The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposure in the chart oposite. According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plugs or protectors in the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss if exposure exceeds the limits set forth opposite. To ensure against potentially dangerous exposure to high sound pressure levels it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.
Product Usage Instructions
- Connect your guitar to the LA212 using a 6.3mm jack cable.
- Make sure the impedance of your amplifier matches the impedance of the LA212 (8 Ohms).
- Turn on your amplifier and adjust the volume to a low level.
- Play your guitar and gradually increase the volume until you reach the desired level.
Dimensions
(BACK REMOVED)
**DISPOSAL
**
This product conforms to the requirements of the following European Regulations, Directives & Rules: CE Mark (93/68/EEC), Low Voltage (2014/35/EU), EMC (2014/30/EU), RoHS (EU2011/65/EU) In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country. In the interest of continued development, Laney reserves the right to amend product specification without prior notification.