PYROFARMS FluoroSphere Water Filled Orb Instruction Manual
- June 4, 2024
- PYROFARMS
Table of Contents
FluoroSphere
Instruction Manual
WHAT’S INCLUDED
- 4″ Ultraviolet Blacklight Base
- 6″ Glass Orb
- 10ml FluoroGel
- Silicone Stopper
NOT INCLUDED
3 AAA Batteries
PRECAUTIONS
- FluoroGel may stain fabric and skin temporarily
- Be careful when handling FlouroGel
INSTRUCTIONS
-
Place three (3) AA batteries into the UV light base.
-
If FluoroGel has separated, swirl and shake the bottle to thoroughly mix the FluoroGel solution.
-
Remove the silicone stopper from the top of the glass orb.
-
Fill the glass orb with room-temperature tap water.
-
Leave about a half inch of space from the top opening. Use caution to not overfill.
-
Dry outside of the orb and place on the UV light base.
-
Turn the light base on (press the black button on the side).
-
Darken the room for a better effect. Gently mix Fluorogel.
-
Add 10-15 drops FluoroGel to the orb through the top opening.
-
Watch the show slowly develop.
-
Take a picture and share it. #FluoroSphere
-
FluoroSphere can be left on a light base as a room decoration.
CLEANING THE FLUOROSPHERE
- Remove the silicone stopper from the top of the glass orb.
- Empty contents into sink.
- Rinse the glass orb and base with warm water.
WHAT IS THE FLUOROSPHERE?
The FluoroSphere is a water-filled Orb that sits on a UV light base.
As the FluoroGel dissolves into the water, a brilliant fluorescent light show
is produced. The FluoroSphere is not living and is based on fluorescence.
Fluorescence occurs when a fluorescent compound (FluoroGel) absorbs light of a
short wavelength (blue/UV) and releases light of a longer wavelength (yellow-
green).
The FluoroSphere comes with a 6-inch glass sphere, a UV light base, and a
bottle of FluoroGel. Once the FluoroSphere is filled with water and placed on
the UV light base, FluoroGel is slowly added. As the
FluoroGel dissolves into the water a unique light show begins.
TRY THE FOLLOWING OPTIONS TO CHANGE THE
FLUOROSPHERE EFFECTS
- Gently swirl water before adding the FluoroGel
- Slightly chill water before adding the FlouroGel
- Use warm water in the FluoroSphere
- Use another clear glass container that can safely sit on the light base
- More FluoroSphere Information
https://pyrofarms.com/collections/all/products/fluorosphere
OTHER PYROFARMS PRODUCTS
The Bioluminescent Bio-Orb with OctoStand
The Bio-Orb is a hand-blown glass sphere filled with bioluminescent PyroDinos
(dinoflagellates). It is all natural! Seawater and Dinos in a glass Orb on a
metal Octopus Stand. The Bio-Orb will produce natural light (bioluminescence)
at night when gently swirled. Easier than a houseplant to care for.
https://pyrofarms.com/collections/all/products/bio-orb-with-octo-stand
2075 Corte del Nogal • Suite T • Carlsbad, CA 92011
#fluorosphere • pyrofarms.com
+
SHOW THE GLOW
Created In California
Documents / Resources
|
PYROFARMS FluoroSphere Water Filled
Orb
[pdf] Instruction Manual
FluoroSphere, Water Filled Orb, FluoroSphere Water Filled Orb
---|---