TERRASSV RMARE ECO Pro-Line 2300W With Remote Control HEAT1 Instructions

TERRASSV RMARE ECO Pro-Line 2300W With Remote Control

Product Information

The ECO pro-line 2300W is an electric heater that is designed and manufactured in compliance with European standards: CE, RoHS. It comes with a 5-year warranty and has a model number of 212-379. The product has an IP-class of 65, which means it is protected against dust and water jets. The heater has a heating element and an aluminium cover with a chrome-nickel grill. It also comes with a remote control that operates on two AAA batteries.

Product Usage Instructions

1. Read the instruction manual carefully before installation and store it safely for future reference.
2. The heater must be used in compliance with the essential requirements of the Directives: EN 60335-2-30:2009, EN 60335-1:2012.
3. In case of any defects or issues, disconnect the appliance from the socket outlet and let it cool off for 30 minutes. If there are no visible defects, try to reconnect the product again. Contact the place of purchase if the issue persists.
4. The remote control operates on two AAA batteries. To insert the batteries, turn the remote control backwards and remove the cover of the battery compartment. Put two new batteries according to the instructions on the battery compartment (marked with the + and – polarity symbols).
5. The heater can be turned on/off/standby using the remote control.
6. Digital models have a timer feature. Press and hold the push button on your device for 3 seconds. One of the expressions OH, 1H, 2H…. 9H will appear on the display. Select the number of hours you want your device to turn off by pressing the +/- buttons on your remote. Your appliance will turn off automatically after operating for the time you selected.
7. The metal stand (foot) provided with the product should be used to fix the heater and avoid damage. Do not use the product without the stand.
8. If the appliance is subject to impact, vibration, or tipping, it stops the heating function by giving an audible warning to ensure safety. Correct the appliance to continue using it again.

General safety instructions
Carefully read through the instruction manual prior to installation and store the manual safely. Keep the manual for any questions of future use of your product. The product is designed and manufactured in compliance with European standards: CE, RoHS. The product complies with the essential requirements of the Directives: EN 60335-2-30:2009, EN 60335-1:2012.

• This heater can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the heater in a safe way and understand the hazards involved. Children must not play with the heater. Cleaning and user maintenance must not be performed by unsupervised children. Children younger than 3 years old must be kept away from the heater unless they are continuously monitored. Children older than 3 and younger than 8 years may only switch the heater ON and OFF if they are monitored or have been taught how to use the heater safely and have understood the resulting dangers; this provided that the heater is placed or installed in its normal place of use. Children older than 3 and younger than 8 years must not plug the heater into the wall socket, adjust the heater, clean the heater and/or perform any user maintenance.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• CAUTION – Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
• The user may connect the heater to the power supply when the connection is to a normal grounded power outlet using the standard power cord of the unit. If the power cord needs to be modified or the heater is to be permanently connected to an electrical outlet, installation must be carried out by an authorized electrician.
• The heater can only be connected to a timer that will switch off the device after the set time. Do not connect the heater to a timer that starts the heater in a timed manner.
• The user must always personally control the starting of the heater.
• When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or injury to persons, including the following:.
• This heater is hot when in use.To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 90 cm from the front of the heater.
• Always unplug the heater when not in use
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or is damaged in any manner. Discard heater, or return to the authorized service facility for examination and/or repair.
• Do not run cord under the carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from the traffic area and where it will not be tripped over.
• Do not use the heater in the immediate surroundings of a bath, a shower or a swimming pool.
• Do not use this heater outdoors during bad weather like rain, storm or snow.
• Connect to properly grounded outlets only.
• Do not place the heater directly below a socket outlet.
• To disconnect heater, turn the controls off, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Check if the voltage indicated on the nameplate of the appliance corresponds to the local mains voltage before you connect the appliance.
• Do not use the heater close to curtains and other combustible materials.
• Do not touch the appliance. Caution! Risk of scald injury!
• In case of improper use, there is a risk of electrical shock and/or fire hazard. Operation of the appliance must be discontinued and remove the mains plug immediately. Do not try to repair the appliance by your-self. Please contact with the service agent or a suitably qualified electrician for maintenance.

Maintenance and cleaning

• Disconnect the plug from the socket before cleaning or when the product is not in use for prolonged periods of time.
• Do not clean the product until 60 minutes after it is turned off.
• When cleaning, do not spray cleaners or water directly into the product.
• Apply the cleaner on a cloth and wipe the product.
• Regularly check the cord for damages and ensure that the plug is clean.
• If the power cord, lamp or other electrical parts needs replacing, this must be done only by a professional electrician.

Troubleshooting

Follow the troubleshooting steps listed below

• Make sure the power cord is connected correctly.
• Check the cable for any ruptures.
• Make sure the ON/OFF switch has been switched OFF.
• Check whether the bulb has blown.
• If the product is turned off due to overheating caused by improper use (overheat sensor), the product must be disconnected from the socket outlet and cool off. Check the product for defects after 30 minutes of cooling. If there are no visible defects, try to reconnect the product again. Please contact the place of purchase if this did not solve your problem.

Storage

Do not route the cord when heater is in storage, or the heater is not in use.

Disposal

European directive 2002/96/EC on Electrical and Electronic Equipment Waste (WEEE), requires that old household appliances are not thrown into the normal municipal waste stream. The appliances should be collected separately to maximize the recovery and recycling of materials and reduce the impact on human health and the environment. The symbol of the “crossed off dustbin” is stamped on the product to recall the obligations of the separate collection. Consum ers should contact their dealer or local authorities regarding the procedure to be followed for the removal of their product.

Customer Service

• Repairs must be carried out by authorized specialists, thus ensuring electrical safety.
• Please contact with the service agent or a suitably qualified electrician.
• Improper repairs could lead to danger to the user.
• This warranty does not cover damage of failure which results from alteration, accident, misuse, abuse, neglect, or improper maintenance.
• In line with our policy of continuous product development we reserve the right to change the product and documentation specifications without notice.

Specifications

• Model 212-379
• Voltage (V) 220-240V~ 50/60HZ
• Power consumption (W) 2300W (4 steps) (800W, 1250W, 1800W, 2300W)
• IP-class IP65
• Remote control Yes
• Battery type 2 x AAA

Function instruction

Remote Control Instructions.
Putting the Batteries

Place two AAA/Alkaline type batteries inside the remote control. To insert the batteries, turn the remote control backwards and remove the cover of the battery compartment and put two new batteries according to the instructions on the battery compartment (marked with the + and – polarity symbols). Replace the batteries as described above.

CAUTION

Please put the batteries before using the remote control.

Notice

• Do not use old or different type batteries when changing them. Otherwise, your remote control may not work correctly.
• If you will not be using your remote control for a few weeks, remove the batteries
• Otherwise, the battery leaks may damage the remote control.
• Digital models have a timer feature. Press and hold the push button on your device for 3 seconds. One of the expressions OH, 1H, 2H…. 9H will appear on the display. Select the number of hours you want your device to turn off by pressing the +/- buttons on your remote. Your appliance will turn off automatically after operating for the time you selected.

Overheating

• In remote-controlled models, when the electronic card reaches 85° C or when the unit senses heat outside of its own program, the appliance warns by giving 1 minute alarm and stops the heating function.

Tipping Protection

• When your appliance is subject to impact, vibration or tipping, it stops the heating function by giving an audible warning to ensure your safety. By correcting your appliance, you can continue to use it again.

Imported by/importeret af NSH NORDIC A/S Virkefeltet 4, 8740 Brædstrup, Danmark www.nshnordic.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>