natec SISKIN 2 USB Type-A Wireless Mouse User Manual

: June 11, 2024
: natec

Table of Contents

INSTALLATION
DPI CHANGE
SAFETY INFORMATION
INSERTING/REMOVING BATTERY
GENERAL
Documents / Resources

SISKIN 2 USB Type-A Wireless Mouse
User Manual

INSTALLATION

PAIRING A NEW DEVICE WITH MOUSE IN BLUETOOTH MODE

Move the ON/OFF switch located at the bottom of the mouse to ON position
Turn ON Bluetooth in device which you want to pair with the mouse
Use the button for changing the channel located on the bottom of the mouse, select the channel BT1 or BT2 and then hold down the same button for about 5 seconds to enter into pairing mode. The LED diode will start flashing rapidly
Then go to the Bluetooth settings on your device and select from the list of mouse Siskin 2
After successful pairing, the LED on the mouse will stop flashing
The mouse is ready for use

CONNECTING THE MOUSE WITH THE PREVIOUSLY PAIRED DEVICE

Turn ON Bluetooth on your device that you have previously paired with the mouse
Turn ON or wake up the from hibernation
The mouse will automatically connect with the device

DPI CHANGE

To change DPI resolution press and hold the right button + scroll wheel at same time for about 5 seconds.
The mouse will switch to the next DPI level. Available are 3 levels of DPI settings (800 – 1200 – 1600) which can be switched in loop. REQUIREMENTS

Device equipped with a USB port or Bluetooth 4.0 and above
Operating systems: Windows® 7/8/10/11, Linux, Android, Mac, iOS

SAFETY INFORMATION

Use as intended, improper usage may break the device.
Non-authorized repairs or disassembly voids the warranty and may damage the product.
Dropping or hitting the device may lead to device being damaged, scratched or flawed in other way.
Do not use the product in low and high temperatures, strong magnetic fields and damp or dusty surroundings.

CONNECTION OF MOUSE VIA USB RECEIVER

Turn ON your computer or other compatible device
Make sure the ON/OFF switch located at the bottom of the mouse is in the ON position
Use the button for changing the channel located on the bottom of the mouse and select the channel indicated with USB receiver symbol
Connect receiver to a free USB port on your computer
The operating system will automatically install the required drivers
The mouse is ready for use
Note:
The device is equipped with intelligent technology for energy management. When the mouse enter into hibernation (sleep) mode, press any button of the mouse for its revival.
The mouse is equipped with an ON/OFF switch to save the battery power when not in use for longer period.

INSERTING/REMOVING BATTERY

Frequency band: 2402 MHz – 2480 MHz
Maximum radio-frequency power: 4.315 dBm

GENERAL

2 years limited manufacturer warranty
The safe product, conforming to the EU requirements.
The product is made in accordance with RoHS European standard.
The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home waste. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. In order to get detailed information about recycling this product please contact your retailer or a local authority.
Hereby, IMPAKT S.A. declares that that the radio equipment type NMY-1970, NMY-1971, NMY-1972, NMY-1978, NMY-1979 is in compliance with Directives 2014/53/EU, 2011/65/EU and 2015/863/EU. The full text of the EU declaration of conformity is available via the product tab at www.impakt.com.pl.

natec SISKIN 2 USB Type A Wireless Mouse - qr
code WWW.NATEC-ZONE.COM
Visit our website

Documents / Resources

| natec SISKIN 2 USB Type-A Wireless Mouse [pdf] User Manual
SISKIN 2, SISKIN 2 USB Type-A Wireless Mouse, USB Type-A Wireless Mouse, Type-A Wireless Mouse, Wireless Mouse, Mouse
---|---