Yanmar Industrial Diesel Engines Scheduled Maintenance Program User Guide
- June 11, 2024
- YANMAR
Table of Contents
Industrial Diesel Engines Scheduled Maintenance
Program User Guide
Yammer Industrial Diesel Engines Scheduled Maintenance Program
Industrial Diesel Engines Scheduled Maintenance Program
Stages
- 300 Hours or 12 months
- 600 Hours or 24 months
- 2400 Hours or 36 months
- 4000 Hours
SCHEDULED SERVICE PROGRAM
Every 300 Hours
(a) Change Lubricating Oil *
(b) Change Lubricating Oil Filter
(c) Change fuel filter
(d) Check Battery and Leads
(e) Check Air Filter
(f) Check Radiator Coolant Condition
(g) Check Radiator Fouling
(h) Check Inlet Air Connections
(i) Check Exhaust Connections are Secure
(j) Check for Oil, Fuel or Coolant Leaks
(k) Check Engine Alternator Mounts are Secure
(l) Check all Fittings and Hoses are Secure
(m) Check Fan Belts
Every 600 Hours
(a) Change air Filter
(b) Change blow by filter
(c) Check Belts
Every 2400 Hours
(a) Change V Belt
(b) Check Smoke coming from Exhaust
(c) Check Engine Vibration
(d) Check Engine Shutdowns are working
(e) Check Governing System (fuel pump)
(f) Check Crank Case Vent tube
Every 4000 Hours
(a) Adjust Valve clearance
* Using Lubricants complying minimum with Int. Specifications ACEA
E3 /E5 (high power engines)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>