hidalite 7506952 Led String of Lights Ledstrip Rx Line 24v Ip67 Opal Mid Instructions

LEDstrip 24V Line Opal IP67
Artnr: IM00507 Version: 2022/03

E-n| Snro| El.nr| GTIN| Length| Max.Length| LED color| LED/m| Output maxim| Voltage DC
---|---|---|---|---|---|---|---|---|---
7506952| 4143592| 3216632| 7392971140049| 5m| 5m| 2700K| 512pcs| lOW| 24V
7506953| 4143593| 3216633| 7392971140056| rm| 5m| 2700K| 512pcs| lOW| 24V
7506954| 4143594| 3216634| 7392971140063| 5m| 5m| 3000K| 512pcs| 10W| 24V
7506955| 4143595| 3216635| 7392971140070| rm| 5m| 3000K| 512pcs| 10W| 24V
7506956*| 4143596| 3216636| 7392971140087| 5m| 5m| 4000K| 512pcs| lOW| 24V
7506957| 4143597| 3216637| 7392971140094| rm| 5m| 4000K| 512pcs| 10W| 24V

SAFETY INSTRUCTIONS

Read these instructions carefully before commencing installation and retain for future reference. The luminaire should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance.

• The installation should be performed by a qualified electrician.
• See the table of technical specifications and follow the instructions to perform the installation in a safe and correct manner; note the recommendations for maximum lengths.
• Make sure that the LED strip’s voltage corresponds with that of the drive unit and ensure that the polarity is correct.
• When two or more LED strips are interconnected, make sure the maximum recommended length is not exceeded.
• Make sure the power is switched off during installation and that the LED strips do not overlap to avoid overheating.
• It is important that the LED luminaire’s maximum specified ambient temperature is taken into consideration in order to guarantee its life span, if this is exceeded, the life span can be shortened drastically.
• Use the recommended/approved assembly fittings to ensure the lifespan of the LED strip.
• The LED strip must not be switched on when rolled up.
• LEDs are sensitive components and must be treated with care and not subjected to mechanical stress.
• The flexible LED strip must not be bent more than the recommended bending radius.
• The LED chip should not be exposed to direct sunlight when switched on.
• The double-sided adhesive tape is for installing the lights, but may need to be complemented with heat-resistant silicone. When installed in the profiles (not uplight) recommends heat-resistant silicone for a permanent and sustainable installation. Do not apply silicone directly on the LED chip but along the sides.

We reserve the right to change specifications at any time.

Installation – End cap

Elektro Elco AB, Tallvägen 5, SE-56435 Bankeryd, Sweden | [email protected] | www.hidealite.se | www.hidealite.uk | www.hidealite.fi | www.hidealite.no | www.hidealite.dk

For explanation of symbols see www.hidealite.se
Find your Profile Suitable profiles
at www.hidealite.com

References

• LED lighting of the highest quality - Hidealite
• Vi udvikler og sælger LED belysning - Hidealite
• LED-valaisimet & LED-valaistus kotiin ja julkisiin tiloihin - Hide-a-lite
• LED-belysning, downlights, spotlights och utendørs belysning av topp kvalitet - Hidealite
• Hide-a-lite - LED-belysning & LED-armaturer för ditt projekt! - Hide-a-lite
• LED lighting of the highest quality - Hidealite

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>