GearLight ‎S1200 High-Powered LED Flashlight User Manual

GearLight ‎S1200 High-Powered LED Flashlight

IMPORTANT SAFETY NOTICE: Lithium-ion batteries are potentially hazardous and can present a fire, explosion, and burn hazard. By using lithium-ion batteries, you agree that GearLight shall not be liable for any incidental or consequential damages arising from, relating to or connected with the use of lithium-ion batteries. If you do not agree with these conditions, please use only alkaline or NiMH rechargeable batteries.

Package Contents

• 1x GearLight S1200 LED Flashlight
• 1x 18650 Battery Tube (Batteries Are Not Included) 1x AA Battery Holder (Inside Flashlight)
• 1x Lanyard
• 1x User Manual
• 1x Warranty Card

WARNING: To avoid eye injury, do not stare directly into the light beam or shine the beam directly into anyone’s eyes. This product is not designed, intended, or recommended for children or hazardous environments.

PRODUCT DETAIL

GETTING STARTED

AA Battery Installation

1. Unfasten the tail cap and remove the battery holder.
2. Insert 3 AA batteries following the correct polarity (+,-) marked on the battery holder.
3. Insert the battery holder back into the flashlight with the positive (+) end first.

WARNING: Always follow the battery manufacturer’s instructions as to the proper usage, handling, storage, and disposal of batteries. Use only batteries from a reputable manufacturer. Do not mix dierent brands or types of batteries in the same flashlight. Replace all batteries at the same time. Failure to follow safety instructions may result in personal injury and damage to property.

18650 3.7v Lithium-ion Rechargeable Battery Installation (See Warning)

1. Insert one 18650 battery (Fig. 1) inside the 18650 clear battery tube (Fig. 2).
2. Insert the combined 18650 battery and clear tube into the flashlight (Fig. 3) with the positive (+) end first.

WARNING: Lithium-ion batteries can present a fire, explosion, and burn hazard. Use only 18650 battery cells with a protection circuit produced by Panasonic, Sanyo, Sony, Samsung, or LG. Remove the battery when the flashlight is not in use. The use of other cell manufacturers or the failure to follow the battery manufacturer’s safety instructions may result in fire, explosion, personal injury, and damage to property.

CAUTION: The flashlight may become warm or hot after extended periods of use at the highest setting. Select a lower setting when the flashlight is hot. This is typical for high-powered flashlights and does not cause damage to the flashlight.

OPERATIONS

WARNING: Remove the batteries if the flashlight is not working properly. Failure to do so may result in personal injury and damage to property

On/Off

• To turn the flashlight on, press down firmly on the red power button located on the tail of the flashlight until you hear a click.
• To turn the flashlight off, press down firmly again until you hear a click.

Switching Modes

• There are 3 different lighting modes. (High, Medium, Low)
• To switch through the different lighting modes, gently press down on the red power button to alternate through the 3 modes.
• The flashlight will switch to the next mode when turned off and on in quick succession. It will reset back to the highest mode after being off for more than 10 seconds.

Zoom

1. Hold both ends of the flashlight; gently twist and pull each end away from the other.
2. Pull the two ends away from each other to zoom in and push the two ends together to zoom out.

TROUBLESHOOTING

If the flashlight flickers, works intermittently, changes modes automatically, appears dim or faded, or does not turn on, check and verify that:

• Each battery is fully inserted matching the polarity (+/-) on the battery holder.
• Each battery end is touching a metal contact in the battery holder.
• The battery holder contacts are clean and the springs are not bent sideways.
• The flashlight’s inner spring is firmly attached and not bent.
• The battery holder is inserted into the flashlight with the positive (+) end first.
• The tail cap is twisted on tightly.

Firmly press the power button on and off several times:

• If the flashlight still does not turn on, replace the batteries.
• If the problem persists, contact GearLight for a replacement.

MAINTENANCE

• Inspect the flashlight monthly carefully remove any damaged batteries and clean any corrosion. If the flashlight is used less than once a month, remove the batteries between uses. Lubricate all threads and rubber O-rings with petroleum jelly twice yearly.

WARRANTY AND LIMITATION OF LIABILITY

• Limited One-Year Warranty
  GearLight warrants this product for one year from the date of purchase against any defects in material or workmanship. This warranty does not cover normal wear and tear, nor damage resulting from misuse or neglect. We will, at our discretion, repair, replace, or refund the purchase price of this product should we determine it to be defective.

• Limitation Of Liability
  Liability is limited to the purchase price of this product. GearLight shall not be liable for any incidental or consequential damages or any implied warranty on this product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Irvine, California | USA | www.GearLight.com

FREQUENTLY ASKED QUESTIONS

What is the brand and model of the high-powered LED flashlight?

The high-powered LED flashlight is the GearLight S1200.

What is the brightness rating of the GearLight S1200 LED Flashlight?

The brightness rating of the GearLight S1200 LED Flashlight is 500 lumens.

What is the warranty period for the GearLight S1200 LED Flashlight?

The GearLight S1200 LED Flashlight comes with a 1-year warranty.

What are the product dimensions of the GearLight S1200 LED Flashlight?

The product dimensions of the GearLight S1200 LED Flashlight are 5.91 inches in diameter, 1.97 inches in width, and 1.97 inches in height.

What is the weight of the GearLight S1200 LED Flashlight?

The weight of the GearLight S1200 LED Flashlight is 10.08 ounces.

What is the handle material of the GearLight S1200 LED Flashlight?

The handle material of the GearLight S1200 LED Flashlight is anti-slip aluminum.

What type of power source does the GearLight S1200 LED Flashlight use?

The GearLight S1200 LED Flashlight is battery-powered.

What is the description pile requirement for the GearLight S1200 LED Flashlight?

The GearLight S1200 LED Flashlight requires 3 AA batteries.

What is the light source type of the GearLight S1200 LED Flashlight?

The GearLight S1200 LED Flashlight utilizes both LED and incandescent light sources.

Is the GearLight S1200 LED Flashlight water-resistant?

Yes, the GearLight S1200 LED Flashlight is water-resistant.

What is the white brightness rating of the GearLight S1200 LED Flashlight?

The white brightness rating of the GearLight S1200 LED Flashlight is 1200 lumens.

Does the warranty for the GearLight S1200 LED Flashlight cover both manufacturer and seller combinations?

Yes, the warranty for the GearLight S1200 LED Flashlight is a combination of manufacturer and seller coverage.

What are the light source types available in the GearLight S1200 LED Flashlight?

The GearLight S1200 LED Flashlight offers LED and incandescent light source types.

How can I ensure optimal performance and longevity of the GearLight S1200 LED Flashlight?

To ensure optimal performance and longevity, regularly check and replace the batteries as needed, keep the flashlight clean and free from debris, and store it in a dry and secure location when not in use.

DOWNLOAD THE PDF LINK:GearLight ‎S1200 High-Powered LED Flashlight User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>