DAKOTA MICRO DMAC-HC AgCam EnduraCam AHD Camera User Manual

User Manual
AgCam®/EnduraCam® AHD Camera

Camera Specifications

Forward or Mirrored.
Programmable at factory only.
Image Pick-up Device| CMOS
Horizontal Resolution| 720P
Minimum Illumination| 0.01 LUX@F1.2
Electronic Shutter| Auto/1/50s~1/100,000s
Scanning System| Progressive
Camera Board Lens| Standard= 92°FOV Custom= 46°, 21°, or 15° FOV
Operating Temp| -45°F (-43°C) – 150°F (66°C)
Construction| Aluminum Case
Waterproofing Criteria| IP69K
Back Light Compensation| Auto On/Off
Camera Body Lens| Triple Hardened auto darkening Glass
Video Output| AHD
Dimensions| 2.13in(54.1mm) (W) x 2.13in(54.1mm) (L) x 2.12in(53.8mm) (H)
Warranty Period| 5 Years

Included Components
A. (1) Camera
B. (3) ¼-20 bolts
C. (1) Camera Bracket
D. (2) Nylon Washers
E. (1) Mounting Magnet
F. (1) ¼-20 Nut
G. (1) Camera Tail (Not Pictured)

Camera Features

• Analog High-Definition video technology offers superior video quality and clarity.
• Made in the USA.
• Waterproof, shockproof, and suitable for nearly any use.
• IR has effective range of 75ft+ in complete darkness.
• Our exclusive Photogray camera body lens darkens in bright conditions and becomes completely transparent under low light conditions. This lens is also transparent of infrared light, allowing LEDs to penetrate even when it is darkened.

Important Information Regarding CVBS and AHD Equipment

• All Dakota Micro, Inc. monitors currently offered are AHD (Analog High Definition). Both AHD and CVBS AgCam®/EnduraCam® cameras will function perfectly on the Dakota Micro, Inc. AHD monitors.
• Be aware not all 3 rd party monitors support AHD video.
• AHD camera WILL NOT work with Dakota Micro Analog wireless equipment.

Camera Warnings
NEVER RELY ON YOUR DAKOTA MICRO CAMERA AS A SAFETY FEATURE. It is up to your discretion to keep your road travel and other operations safe. Your Dakota Micro camera will provide you with information only based on what it sees. Operation of machinery safety guidelines still apply.
Dakota Micro, Inc. cameras are equipped with an array of light emitters which are visible to the human eye. This feature will aid in low light conditions but has limitations. The effective range of the night vision feature is 1 to 75+ feet and will produce a monochrome image only.
DO NOT ATTEMPT TO DRIVE MACHINERY USING THIS FEATURE.

Consumer Limited Warranty

Subject to the disclaimer, limitations and other directions stated hereafter, Dakota Micro, Inc. warrants that the Product will be free from defects in material and workmanship for periods as stated hereafter from the date of original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY, DAKOTA MICRO, INC. SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral statements or representations made by anyone which are contrary to or at variance with the terms stated in this LIMITED WARRANTY are void.
Dakota Micro, Inc. will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of five (5) years for AgCam® /EnduraCam® cameras; three (3) years for InnoPro® cameras; two (2) years for AgCam®/ EnduraCam® monitors, and Wireless components; Twelve (12) Months for all Overview® and RazerCam™ Cameras & Monitors, cables and all other accessories.
In addition to the five (5) years for AgCam® /EnduraCam® cameras Dakota Micro will warranty for the life of the camera against any variety of ingress within the camera housing. This includes moisture and dust particles that are found inside the camera resulting from a manufacturing defect and does not include ingress because of damage caused by no fault of Dakota Micro, Inc.
The Dakota Micro, Inc. limited warranty periods outlined above apply throughout the United States and Canada only. A one (1) year maximum limited warranty for all Products applies to all other geographic locations unless otherwise stated in writing by Dakota Micro, Inc.
This limited warranty does not apply to any issues connected with appearance that have no relation to the performance of the Product nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the process set forth in the Product Warranty/Repair Process, and provide proof of purchase to Dakota Micro, Inc.
Neither the sales personnel of Dakota Micro, Inc. nor any dealer or any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time periods described herein.
The warranties described herein shall be the sole and exclusive warranties and remedies provided by Dakota Micro, Inc. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Dakota Micro, Inc. to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims. In no event shall Dakota Micro, Inc. be liable or in any way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than Dakota Micro, Inc.
Some states do not allow the limitation or exclusion of incidental or consequential damages, so said limitation may not apply to you.
Any action at law, suit in equity, or other judicial proceeding for the enforcement of any right provided for herein or otherwise, or with respect to any claim that a purchaser may have against Dakota Micro, Inc. shall be instituted only in the Courts of the State of North Dakota, either in the state district court located in Wahpeton, North Dakota or in Federal District Court located in Fargo, North Dakota. Without regard to conflicts of law principles, the laws of the state of North Dakota shall govern the interpretation and enforcement of the terms of this Limited Warranty and all aspects of the relationship between Dakota Micro, Inc., and the purchaser.

This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.

8659 148½ Ave. SE.
Cayuga, ND 58013
www.dakotamicro.com
Management System Registered to ISO 9001

Documents / Resources

| DAKOTA MICRO DMAC-HC AgCam EnduraCam AHD Camera [pdf] User Manual
DMAC-HC AgCam EnduraCam AHD Camera, DMAC-HC, AgCam EnduraCam AHD Camera, EnduraCam AHD Camera, AHD Camera, Camera
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>