Shenzhen Bao Tianhua Technology MU01039 Beam Light Up TWS Earbuds User Manual

Shenzhen Bao Tianhua Technology MU01039 Beam Light Up TWS Earbuds

Beam Light Up TWS Earbuds

PACKAGE CONTENT

• 1(One) Beam Light Up TWS Earbuds
• 1(One) Charging Cable
• 1(One) Instruction Manual

Button Description

1. Dust Net
2. Touch Button
3. LED Indicator
4. Charging Port

How To Use

1. The earbud(s) will automatically power on and pair to each other when you open the charging case.
2. The earbuds will power off if they don’t connect to any device within 5 minutes. If the earbuds turn off. To turn the earbud(s) on again put the earbuds back into the charging case and then open the charging case.
3. To pair your earbuds, turn on the Bluetooth on your device and choose “BEAM BT TWS” on the list to connect. When the LED light turns off, they are paired successfully and you will hear a beep tone.
4. To answer a call, short press the earbud Multi-function button for once. To reject a call, long press the the earbud Multi-function button for two seconds.
5. Short press the earbud Multi-function button to stop the music; press it again to resume playing.
6. Long press the earbud Multi-function button 5s until the red light flashes, then the Bluetooth device is turned off. The earbuds turn off automatically when the earbuds are away from the Bluetooth device for a duration of over 5 minutes.To turn on the earbuds, press the earbud Multi-funtion button 5S until the blue light flashes.

How to charge

1. Charging your case:

2. Plug in the charging case using the USB Type-C cable included.

3. While the case battery is charging, the case LED indicator will be flashing red.

4. When the case is fully charged, the light will change to solid red.

5. When the battery is low, there will be a beep tone.

6. Charging your earbuds:
   Place the earbuds inside of the charging case.The earbuds will automatically start charging once placed in the charging case. A solid red light on the earbuds will indicate that the earbuds are charging. Once fully charged, a blue light will turn on for 1 minute and then turn off.

7. The earbuds and case can be charged simultaneously, but the earbuds will not charge if there is no power in the case. The case needs to have at least a minimum charge to charge the earbuds. You must charge the TWS if it has not been used for more than 3 months.

Technical Specifications

• Model Number: MUO1039
• Range: 33ft/ 10m
• Earphone battery capacity: 30mAh
• Charging case battery capacity: 250mAh
• Play Time: 4hours /12 hours
• Charge Time: 1 hours/2 hours
• Charging Input: 5V – 200mA
• Frequency Response: 20Hz-20 kHz
• Operating temperature range: 0-45 C

FAQ

1. Why can’t I start my TWS earbuds?
   Answer: Please ensure that the earbuds is fully charged for your first use.

2. Why won’t sound come out of the earbuds?
   Answer: Check whether the playback device and the TWS earbuds are successfully established. If the audio device is not properly connected, please reconnect. Please also adjust your mobile phone or volume to a suitable volume level.

3. Why can’t I find this earbuds in my bluetooth options?
   Answer: Make sure the Bluetooth is in “visible mode”. lf no pairing occurs, the Bluetooth function will automatically shut off. Please reopen Bluetooth to “visible mode”. If there is a program error, please reboot your phone, and if program error is caused by your TWS earbuds, please restart the earbuds.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occu installation.lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Charge and operate only as indicated in this manual, as improper use may result in damage to the product or injury.
• To avoid risk of shock or injury, do not dismantle the device or insert any objects into the Heaphone.
• To avoid electronic interference and/or compatible conflicts, turn off the product in any facilities where posted notices instruct you to do so.
• Do not pull the Heaphone charging cable. Damage may result to the cable.
• Keep out of reach of children. This is not a toy.
• Avoid exposure to moisture, liquids, heat, flame and high voltage equipment.
• Retain these instructions as they contain important information.
• Do not short circuit the input terminals of the Heaphone.
• Do not drop, place heavy weight or allow heavy impact to the Heaphone.
• PCB of battery should not be crushed and twisted.
• Battery body should not be Bended.
• Do not disassemble and Do not dispose of in fire.
• Do not use the product while driving or crossing the road.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID:2A2H6MUO1039
Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China CLASS 1 LED PRODUCT Keep All Relevant Information For Future Reference

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>