JBL FLIP6 Wireless Bluetooth Speaker Portable User Guide
- June 9, 2024
- JBL
Table of Contents
QUICK START GUIDE
FLIP6
WHAT’S IN THE BOX
Bluetooth pairing
PLAY
PARTYBOOST
APP
WATERPROOF DUSTPROOF IP67
TECH SPEC
| Transducers: | 45 x 80 mm woofer / 1.75 x 3”, 16 mm tweeter / 0.6” |
|---|---|
| Output power: | 20 W RMS for woofer, 10 W RMS for tweeter |
| Frequency response: | 63 Hz – 20 kHz |
| Signal-to-noise ratio: | > 80 dB |
| Battery type: | Li-ion polymer 17.28 Wh (equivalent to 3.6 V / 4800 mAh) |
| Battery charge time: | 2.5 hours (5 V / 3 A) |
| Music play time: | up to 12 hours (dependent on volume level and audio content) |
| Cable type: | USB – C charging cable |
| Cable length: | 1.2 m / 47.2” |
| Bluetooth® version: | 5.1 |
| Bluetooth® profile: | A2DP 1.3, AVRCP 1.6 |
| Bluetooth® transmitter frequency range: | 2400 MHz – 2483.5 MHz |
| Bluetooth® transmitter power: | ≤ 10 dBm (EIRP) |
| Bluetooth® transmitter modulation: | GFSK, π/4 DQPSK, 8DPSK |
| 2.4GHz SRD frequency range: | 2407 MHz – 2475 MHz |
| SRD transmitter power: | < 10 dBm (EIRP) |
| Product dimensions (W x H x D): | 178 x 68 x 72 mm / 7.0 x 2.6 x 2.8” |
| Net weight: | 0.55 kg / 1.21 lbs |
| Packaging dimensions (W x H x D): | 216 x 106 x 99 mm / 8.5 x 4.2 x 3.9” |
| Gross weight: | 0.92 kg / 2.05 lbs |
| Maximum operation temperature: | 45 °C |
To protect battery lifespan, fully charge at least once every 3 months.
Battery life will vary due to usage patterns and environmental conditions.
Do not expose the JBL Flip 6 to liquids without removing cable connection. Do
not expose JBL Flip 6 to water while charging. It may result in permanent
damage to the speaker or power source.
Chemicals and salt in your pool or the ocean can damage the waterproof seals
or harm the connector surface over time if not rinsed off after use. After a
liquid spill or rinsed, do not charge your speaker until it’s completely dry
and clean.
Charging when wet might damage your speaker.
With USB-C charging protection, a reminder sound will alert you to unplug if
the connector detects water, salt, or any other chemicals. When using an
external adapter, the output voltage/current of the external adapter should
not exceed 5V/3A.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.