beyerdynamic 202-SMJ088 USB WL Adapter User Guide
- June 9, 2024
- beyerdynamic
Table of Contents
USB
WL Adapter
Quick Start Guide
202-SMJ088 USB WL Adapter
You can find detailed operating instructions in your language together with
further information at
www.beyerdynamic.com/usb-adapter.html#product-
downloads
This manual describes the most important functions of the beyerdynamic USB WL Adapter.
SAFETY INSTRUCTIONS
► Please read these instructions carefully and completely before using the
product.
► Please observe all instructions given, especially those concerning the safe
use of the product.
► Do not use the product if it is defective.
► The company beyerdynamic GmbH & Co. KG accepts no liability for damage to
the product or injury to persons caused by careless, improper or incorrect use
of the product, or by use for purposes not specified by the manufacturer.
Intended use
Only use the product as described in this product manual. beyerdynamic accepts
no liability for damage to the product or injury to persons caused by
careless, improper or incorrect use of the product, or by use for purposes not
specified by the manufacturer. beyerdynamic is not liable for damage to USB
devices that do not comply with the USB specifications. beyerdynamic is not
liable for damage resulting from connection interruptions due to batteries
being empty or too old, or due to exceeding the Bluetooth® transmission range.
Please also observe the relevant country-specific regulations before using the
product.
Risk of swallowing
► Keep small parts, such as product, packaging and accessories, away from
children and pets. They constitute a choking hazard if swallowed.
Environmental conditions
► Do not expose the product to rain, snow, liquids or moisture.
ABOUT THIS MANUAL
This manual describes the most important functions of the beyerdynamic USB WL
Adapter.
The information in this manual refers to the default settings of the specified
software version. A newer version may be available.
► You can find information about software updates under „Firmware-Update“in
your user manual.
SUPPLIED ACCESSORIES
- USB WL Adapter
- Quick Start Guide
PRODUCT OVERVIEW
1 Sync button
2 Status LED display
PRODUCT DESCRIPTION
The Bluetooth® modules built into PCs and notebooks are general devices that
do not map all the functions needed to operate a hands-free system or a
headset in conjunction with a Unified Communications software solution. A USB
WL Adapter is therefore required.
The USB WL Adapter gives you:
- High quality audio playback (A2DP)
- Volume level synchronised with the operating system (macOS / Windows)
- Detection of microphone use and switching to HFP
- Fully synchronised buttons on the beyerdynamic device
The following Bluetooth® profiles are supported:
- HFP (wideband voice / HD Audio (l6kHz); AT commands from the hands-free channel are understood and converted into commands for the USB HID device.)
- A2DP (high quality audio playback; AVRCP for volume synchronisation; profile commands are converted into commands for the USB HID device.)
FIRST STEPS
Removing from packaging and storing
► Remove the USB WL Adapter from the packaging.
This provides the best protection and prevents damage.
SUPPORTED AUDIO CODECS
The USB WL Adapter supports the SBC audio codec.
Please note that only the codecs available in the playback device can be used
for audio transmission.
Playback device and the beyerdynamic Bluetooth® device automatically select
the best mutually available codec: In this case SBC.
OPERATION
Inserting / removing the USB WL Adapter
The following platforms/operating systems are supported:
- Windows 10 (32bit/ 64bit) and future Windows releases
- macOS 10.14.6 (Mojave) and 10.15.7 (Catalina) and future operating systems
Plugging in:
► Plug the USB WL Adapter into the USB port on the desired PC/laptop.
Once plugged in, the USB WL Adapter is displayed as “USB WL Adapter” on the
computer.
Removal:
► Pull the USB WL Adapter out of the USB connection on the PC/laptop.
Connecting compatible Bluetooth® products from beyerdynamic and laptop/ PC
with USB WL Adapter via Bluetooth® (pairing)
Before you can use compatible Bluetooth® products from beyerdynamic, you must
connect them with your mobile phone or another Bluetooth®-enabled device. The
connection process may differ depending on the device.
With the USB WL Adapter, a laptop/PC can be connected with up to three
Bluetooth®-enabled devices from beyerdynamic.
Pairing with a USB WL Adapter on a PC/laptop is described here.
► Please refer to the relevant operating instructions of the device you wish
to pair the beyerdynamic USB WL Adapter with.
Connect the USB WL Adapter to a suitable beyerdynamic Bluetooth® device:
√ The output device (PC/laptop) is switched on.
√ The beyerdynamic Bluetooth® device is switched on.
- Plug the USB WL Adapter into the USB port on the PC/ laptop.
- Press the Sync button (1) on the USB WL Adapter for 3 seconds. The LED display flashes alternately blue and red.
- Carry out pairing as described in the operating instructions of your beyerdynamic Bluetooth® product.
After successful pairing, the LED display of your USB WL
Adapter flashes alternately blue and white three times.
Deleting the list of already connected devices:
► Press the Sync button (1) on the USB WL Adapter for 10 seconds.
The LED display flashes yellow. The list of already connected Bluetooth®
devices (maximum 3) is deleted.
USB WL Adapter-supported functions
When paired with PC or laptop devices, the USB WL Adapter enables the use of
functions such as mute and call functions (hang up) that are often not
supported by the playback devices.
► Please refer to the operating instructions of your beyerdynamic Bluetooth®
product.
DISPOSAL
This symbol on the product, in the user manual or on the packaging means that
your electrical and electronic devices must be disposed of separately from
household waste at the end of their life cycle. There are separate collection
systems for recycling in the EU.
► For further information, please contact your local authorities or the dealer
where you purchased the product. Returning batteries is free of charge.
EU DECLARATION OF CONFORMITY
beyerdynamic hereby declares that this radio transmission device complies with
the EU Directive 2014/53/EU.
► The full text of the EU declaration of conformity can be found on the
Internet at: www.beyerdynamic.com/cod
TECHNICAL DATA
ISM band frequency range 2.400 to 2.4835 GHz
Transmitting power 2.5 mW (Class 2)
Length x width x height (mm) 31 x 17 x 6
Weight 3 g
► You can find more detailed information about the technical data online at: www.beyerdynamic.com/usb-adapter.html#product- downloads
REGISTERED TRADEMARKS
Windows is a registered trademark or trademark of Microsoft Corporation in the
United States of America or other countries.
iPhone, iPod touch, iPad, macOS and Mac are trademarks of Apple Inc.
registered in the United States and other countries.
Android is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered trademarks of Bluetooth®
SIG, Inc. and any use of such marks by beyerdynamic under licence. Other
trademarks and trade names belong to their respective owners.
USB type A, USB type B and USB type C are trademarks of USB Implementers.
beyerdynamic GmbH & Co. KG
Theresienstraße 8 • 74072 / Germany
Phone +49 7131 617-300 • E-Mail
info@beyerdynamic.com
www.beyerdynamic.com
For further distributors worldwide, please go to
www.beyerdynamic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>