ttec AirBeat Lite 2 True Wireless Bluetooth Headset User Manual
- June 9, 2024
- ttec
Table of Contents
Air Beat Lite 2 True Wireless Bluetooth Headset
User Manual Air Beat Lite 2 True Wireless Bluetooth Headset
Air Beat Lite 2 True Wireless Bluetooth Headset
Discover
- Charging box
- LED battery indicator
- LED indicator
- Touch sensor area
- USB-C input
In The Box
Before the first use, make sure that earbuds are placed in the charging box and charge with a USB-C cable.
How to Use
Pairing
Charging the charging box
Charging the earbuds Mono
Smart technology lets both terabauds to be used independently.
Earbuds will auto-connect with the last device after twirled on.
Earbuds turn on automatically when charging box is opened, turn off when
placed back in the charging box and the lid is closed.
Control Buttons
| | |
---|---|---|---
On| Off| Answer Call| End Call
| | |
---|---|---|---
Reject call| Voice Assistant| Next| Previous
Specifications
Earbud
| Bluetooth Version| v5.2
---|---|---
| Battery Life| ∼ 6 hours
| Dimensions| 16,61538,69617 mm
| Weight| 3,6 gr
| Operating Distance| ∼10 meters
| Charging Time| ∼1 hour
Charging Box
| Extra Battery Life| ∼26 hours
---|---|---
| Dimensions| 48,356,00626,486 mm
| Weight| 30 gr
How to Reset
https://guide.hellottec.com/airbeat-lite2.pdf
Do not expose to liquids.
Avoid extreme temperatures.
Avoid dropping.
Do not disassemble.
This product complies with the radio interference requirements of the European
Union.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
with from ttec
FCC ID: 2A9KZ-2KM137B
WWW.hellottec.com