Dr Prepare EWT86117 Projection Alarm Clock Instruction Manual
- June 9, 2024
- Dr Prepare
Table of Contents
Dr Prepare EWT86117 Projection Alarm Clock
IDENTIFYING PARTS
- PM icon
- Time
- SLEEP icon
- FM radio icon
- Indoor temperature and humidity
- ALARM 1 icon
- ALARM 2 icon
- Projector
- AL button
- VOL button
- SET button
- $NZ/LIGHT button
- RADIO/SLEEP button
- UP/PROJECT button
- DOWN button
- Battery Compartment (1xCR2032, included)
- Power supply socket
- USB charging port
MAIN FEATURES
- 7 buttons: DOWN, UP/PROJECT, RADIO/SLEEP, SNZ/LIGHT, SET, VOL,AL
- Time (Hour & Minute)
- 12H/24H time format
- Alternative temperature units: “C/F
- Indoor temperature: 0″C – 50″C (32F – 122F)
- Indoor and outdoor humidity: 20% – 95%
- Projection of time
- Rotation of projection: 180°
- Double alarms with snooze function
- FM radio function
- Auto brightness and night mode
FUNCTION OF BUTTONS
DOWN
- a. Press to decrease the setting value during setting.
- b. Press and hold the button for 3 seconds for fast adjustment during setting mode.
- c. In normal mode, press to tum on/off the alarm.
- d. In normal mode, press and hold the button for 3 seconds to select “C or F.
UP/PROJECT
-
a. Press to increase the setting value during setting.
-
b. Press and hold the button for 3 seconds for fast adjustment during setting mode.
-
c. In normal mode, press this button to turn on the projection and adjust the projection brightness: HI-LO-OFF.
-
d. In normal mode, press and hold the button for 3 seconds to rotate the projection for 180 degrees.
RADIO/SLEEP -
a. Press to turn on the radio function.
-
b. In FM radio mode, press this button to set the SLEEP time.
SNZ/LIGHT -
a. Press this button to adjust the LED backlight brightness:
HI-Ml-LO-OFF (with the clock plugged in). -
b. Press and hold the button for 3 seconds to tum on/off the auto-light mode.
-
c. In FM radio mode, press this button to turn off the radio.
SET -
a. Press this button to switch time and night mode.
-
b. Press and hold the button for 3 seconds to enter the time setting.
-
c. In FM radio mode, press this button to search and save the radio stations.
VOL -
a. In FM radio mode, press this button to adjust the FM radio volume.
AL -
a. Press this button to check Alarm1 and Alarm2.
-
b. In alarm mode, press and hold this button to enter alarm setting.
Default Settings -
The LED display lights up with all icons for 2 seconds when plugged in. Then with a beep, it turns into normal display.
-
Default time: 00:00, 24-hour time format.
-
Alarm 1: 6:00 a.m. Alarm 2: 6:00 a.m.
-
Default temperature unit: “C
-
Default projection: off (press UP/PROJECT button to tum on the projection)
Note: The battery is only used as a backup battery (you will not be able to operate the alarm clock when it is only powered by the battery). Please do not use the battery as main power supply. Instead, please use the included power adaptor.
STARTUP
Please remove the plastic insulator tab from the button battery compartment
in the back and connect the adaptor to the power supply and the other end to
the DC hole on the back of the clock, then the clock starts to work.
Note: When the power is off, the LED screen will not light up, and the radio
and alarm will not work. The backup battery only retains the basic settings of
time and alarm.
TIME SETTING (TURN OFF THE RADIO)
- Press and hold the “SET” button for 3 seconds the 12124 Hour Mode icon starts to flash. Use “UP/PROJECT” or “DOWN” buttons to set 12-hour I 24-hour time format.
- Press “SET” button to confirm your setting, the Hour icon starts to flash. Use “UP/PROJECT” or “DOWN” buttons to set the correct hour.
- Press “SET” button to confirm your setting, the Minute icon starts to flash. Use “UP/PROJECT” or “DOWN” buttons to set the correct minute.
- Press “SET” (or you can wait for 10 seconds without further operation) to save the setting and exit the time setting mode.
Note: When 12-hour time format is selected, the “PM” icon will appear on the screen in the afternoon.
ALARM SETTING MODE
- In time mode, press “AL” to enter alarm mode. The AL 1 icon ” m ” will flash.
- In AL 1 mode, press and hold “AL” button for 3 seconds until the Hour icon of Alarm 1 starts to flash. Use the “UP/PROJECT” or “DOWN” buttons to set the desired hour.
- Press “AL” button to confirm your setting, and the Minute icon starts to flash. Use “UP/PROJECT” or “DOWN” buttons to set the desired minute.
- Press “AL” button to confirm your setting, and the Snooze Time (5 min-60 min) starts to flash. Use “UP/PROJECT” or “DOWN” buttons to set the desired snooze time.
- Press “AL” button to confirm your setting, and the Alarm Sound icon starts to flash. Use “UP/PROJECT’ or “DOWN” buttons to set the desired alarm sound. ( “rd” means wake-to-radio, and “bu” means wake-to-buzzer. When “rd” or “bu” is selected, the related alarm will tum on.)
- Press “AL” (or you can wait for 10 seconds without further operation) to save the setting and exit the alarm setting mode.
- If you need a second alarm clock, please repeat the above operation steps (Note: the AL2 icon ” ®” will display on the screen).
- In alarm-checking mode, the clock will return to show time without further operation for 5 seconds.
- In normal mode, press the “DOWN” button to turn on/off the alarm: AL 1 ON-AL 1 and AL2 ON-AL2 ON-AL 1 and AL2 OFF.
ALARM AND SNOOZE
- While the alarm is beeping, the alarm icon will flash. It will stop automatically after 2 minutes.
- While the alarm is beeping, press the “SNZ/LIGHT” to enter snooze mode. The alarm will beep again after the snooze timer expires.
- To turn off the alarm, press any key other than “SNZ/LIGHT” button.
Note: If your second alarm activates while the first alarm is sounding or it is in snooze mode, the second alarm will override the first alarm.
FM RADIO SETTING
- To turn on the radio, press “RADIO/SLEEP” and the display shows “ON”, then the radio frequency readings in MHz. The audio frequency range is FM 76MHz – 108MHz.
- Press “SET’ button to automatically search and save stations. The number of saving stations is unlimited. When the search is complete, the FM radio will play the 01 station.
- Press “UP/PROJECT” or “DOWN” button to play other saved stations.
- To adjust the volume, press “VOL” button and the display shows “LOO”. Then press “UP/PROJECT” or “DOWN” buttons to adjust volume from LOO (minimum) to L 15 (maximum).
- Press “SNZ/LIGHT” button to tum off the radio.
- In FM radio mode, the clock will return to show time without further operation for 5 seconds.
Note: Keep your radio away from interference sources or other electronic devices, which may cause interference to the radio.
SLEEP TIMER
-
Press “RADIO/SLEEP” button twice to enter the sleep mode, then the Sleep icon “SL” and Sleep Time “05” (5 minutes) appear on the display.
-
Then press the “RADIO/SLEEP” button to adjust the sleep timer: 5 / 15 / 30 / 45 / 60 / 75 / 90 minutes / OFF.
When the screen returns back to show the time, press the “RADIO/SLEEP” button twice to show the remaining sleep time. -
The radio will play for the programmed sleep time and then shut off automatically.
PROJECTION FUNCTION
- In the time mode, press “UP/PROJECT” button to turn on the projection, then press again to adjust the brightness of the projection: HI-LO-OFF.
- When the projection is on, press and hold “UP/PROJECT” button to rotate the projection for 180 degrees.
Note: There is no projection function when it is only powered by the battery.
BRIGHTNESS CONTROL
- In the time mode, press “SNZ/LIGHT” button to adjust the brightness of the LED display from High » Medium » Low » OFF.
- When the LED display is off, you can start the clock only by pressing the “SNZ/LIGHT” button.
- Press and hold the “SNZ/LIGHT” button for 3 seconds to select the ON/OFF of auto brightness mode. Selecting ON means that the LED display will automatically enter into the low-brightness mode in the dark environment. OFF means that you can only control brightness manually (default OFF).
Note: This can only be done when the radio is off and the clock is not beeping.
NIGHT MODE
-
Night mode means the clock will enter low-brightness mode.
In lime mode, press “SET’ button to enter night mode. Press “UP/PROJECT” or “DOWN” to turn on/off the night mode (default off). -
In ON mode, press and hold “SET” button to set the time interval of night mode: start hour-start minute-end hour-end minute (default: 18:00 to 6:00 the next day)
Note: You can only select the auto brightness mode or night mode.
INDOOR TEMPERATURE AND HUMIDITY
- The indoor temperature range is O”C to 50°C (32 ‘F to 122 ‘F ).
- The indoor humidity range is 20% – 95%.
- When the alarm is beeping, the clock will stop checking temperature and humidity.
- Press and hold “DOWN” button for 3 seconds to select “C or ‘F .
CHARGING
- Connect the charging cable of your mobile phone to the USB port on the back of the unit, then connect the other end to your mobile phone. The clock will charge the mobile phone automatically.
RESTORE FACTORY DEFAULT
- If the time error occurs, it may be subject to other equipment’s electrostatic interference. To resolve this, you can cut off the power supply and remove the backup battery, then the clock can be restored to the Factory Default. Repower the clock and set the functions.
PRECAUTIONS
- Please keep the clock away from water, direct sunlight, or a high-temperature environment.
- When placing the clock on the furniture, use a cloth or other protective material to keep ii away from the furniture.
- If necessary, use a flannel with a little soapy water to clean the clock. Substances such as gasoline, thinner, or similar liquids will damage the clock’s surface. Cut off the power before cleaning.
- If you don’t use this clock for a long time like a month or even longer, remove the battery to prevent the clock from being corroded. If the battery compartment is corroded or dirty, clean and replace the battery in time.
- Do not disassemble the unit.
WARRANTY
- Dr. Prepare products are covered by a 12-month limited warranty from the original purchase date. If any problems occur, please contact out support team.
- We only provide after-sales services for products that are sold by Dr. Prepare or authorized retailers and distributors. If you have purchased tour unit from other channels, please contact your seller for more about return and warranty.
CUSTOMER SUPPORT
- If you have any questions or concerns, please send us an email at [email protected]
Importer: Dr Prepare Global Limited
Name: Sea&Mew Accounting Ltd
Vision 25, London, Enfield EN3 7GO UK Contact Address: Person: Electric Billy
Avenue Han
Tel: +44 7399648608
E-mail: [email protected]