BeSafe UN R129 Rear Facing Child Seat Instruction Manual
- June 9, 2024
- BeSafe
Table of Contents
Belt Guard
Instruction Manual
UN R129 Rear Facing Child Seat
This Belt Guard complies with the strict requirements of UN R129. It helps to keep the internal harness properly fitted and prevents children from wriggling under the harness.
Usage
Contents: Belt Guard – 2 parts.
First-time installation (1): Connect each part of the Belt Guard with a
shoulder pad. Open the Velcro closure on the back of each shoulder pad and
place the Belt Guard in-between, close the Velcro again. Align the Belt Guard
with the height of the armpits of your child.
Daily use (2): Connect the two parts of the Belt Guard. Then close the
buckle and tighten the harness. Before opening the Belt Guard first loosen the
harness and open the harness buckle.
Warning (3): Always close the harness buckle of the toddler seat. The
Belt Guard is not a replacement for the harness buckle.
Cleaning instructions (4): Wipe clean using a damp cloth and mild
detergent.
Warranty: for details please visit
www.besafe.com
11005694 2022 08 30
References
- Developing the safest possible car seats for children of all ages | BeSafe
- Developing the safest possible car seats for children of all ages | BeSafe
- Dobrodošli na najsigurniju stranicu u Hrvatskoj - Besafe Hrvatska
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>