LD SYSTEMS LDWS100MH1 Headset Microphone User Manual
- June 9, 2024
- LD Systems
Table of Contents
LDWS100MH1 Headset Microphone
Product Information
The LDWS100MH1 is a headset microphone with a back-electret condenser. It has a cardioid directivity and a frequency response range of 20 – 20,000Hz. The nominal impedance is 680Ohm(s) and it requires phantom power of 5V. The microphone input is a mini-XLR (3-pin, female). The included accessory is a foam windscreen and the weight of the product is 0.045kg.
Product Usage Instructions
- Connect the mini-XLR (3-pin, female) microphone input to the appropriate device.
- Ensure that the device provides phantom power of 5V to the microphone.
- Place the headset microphone on your head and adjust it for comfort.
- Position the microphone boom in front of your mouth, ensuring that it is not obstructed by any clothing or accessories.
- Speak into the microphone at a normal volume and adjust the position of the boom if necessary to achieve optimal sound quality.
- When not in use, store the headset microphone in a safe, dry place.
SAFETY INFORMATION
- Please read these instructions carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Observe all safety warnings. Never remove safety warnings or other information from the equipment.
- Use the equipment only in the intended manner and for the intended purpose.
- During installation, observe the applicable safety regulations for your country.
- Never place sources of ignition, e.g., burning candles, on the equipment.
- Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment – in this case, observe the special instructions noted below. Do not expose this equipment to flammable materials, fluids, or gases.
- Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or drinking vessels, on the equipment.
- Make certain that objects cannot fall into the device.
- Use this equipment only with the accessories recommended and intended by the manufacturer. 1
- Do not open or modify this equipment.
- After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
- During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
- If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by authorized, qualified personnel.
- Clean the equipment using a dry cloth.
- Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
- Plastic bags must be kept out of reach of children.
CAUTION HIGH VOLUME LEVELS WITH AUDIO PRODUCTS!
This equipment is intended for professional use. Therefore, commercial use of
this equipment is subject to the respective applicable national accident
prevention rules and regulations. As a manufacturer, Adam Hall is obligated to
notify you formally about the existence of potential health risks. Hearing
damage due to high volume and prolonged exposure: When in use, this product is
capable of producing high sound-pressure levels (SPL) that can lead to
irreversible hearing damage in performers, employees, and audience members.
For this reason, avoid prolonged exposure to volumes in excess of 90 dB.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
http://www.adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email
Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation) This symbol on the product, or the documents accompanying the
product, indicates that this appliance may not be treated as household waste.
This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government office, for details on where and how they can recycle this item in an environmentally friendly manner. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal
SPECIFICATIONS
| Model name: | LDWS100MH1 |
|---|---|
| Product type: | Headset microphone |
| Type: | Back electret condenser |
| Frequency response: | 20 – 20,000Hz |
| Directivity: | cardioid |
| Nominal impedance: | 680Ohm(s) |
| Phantom power requierements: | 5V |
| Microphone input: | mini-XLR (3-pin, female) |
| Accessories (included): | Foam windscreen |
| Weight: | 0.045kg |
Adam Hall GmbH Daimlerstr. 9 61267 Neu-Anspach Germany
Tel.: (+49) 60 81 / 94 19 0
Fax: (+49) 60 81 / 94 19 1000
eMail: mail@adamhall.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>