BeSafe Pregnant iZi FIX Belt User Guide

BeSafe Pregnant iZi FIX Belt

Product Information

The BeSafe Pregnant iZi FIX is a product designed to provide comfort and safety for pregnant women while traveling in a car. It can be installed in cars with or without isofix anchorages. The product comes with fix connectors or a strap for installation depending on the type of car seat. The BeSafe Pregnant iZi FIX should only be used in combination with a 3-point car belt.

Vital information

• DO NOT switch off the airbag or any other safety system of the particulair vehicle seat where the BeSafe Pregnant is used.
• Use the BeSafe Pregnant only in combination with a 3-point car belt.
• Use the BeSafe Pregnant from 2 months of pregnancy.
• After an accident, the BeSafe Pregnant must be replaced. Although it may look undamaged, the BeSafe Pregnant may not be able to protect mother and unborn child as well as it should in another accident.
• Before every use, make sure that the 3-point belt is not damaged or twisted and installed tight.
• DO NOT attempt to dismantle, modify or add any part to the seat. Warranty will expire if non-original parts or accessories are used.
• KEEP this user manual for later use with the seat.

Product Usage Instructions

Preparing to Install

1. In seats with isofix anchorages, connect both fix connectors with the isofix anchorages of the vehicle seat.
2. In seats without isofix anchorages, put the strap around the back of the vehicle seat and close the buckle.

• Shoulder belt 1
• Lap belt 2
• Strap 3
• Strap buckle 4
•  Strap ring (2x) 5
• FIX connectors (2x) 6
• Crotch strap 7
• Lap belt connector 8
• Isofix car anchorage (2x) 9

Using BeSafe Pregnant

1. After installing the BeSafe Pregnant in the vehicle seat, sit on top of the pregnant belt.
2. Install the 3-point car belt in the usual way.
3. Pull the flap of the lap belt connector up between your legs and position the flap behind the lap belt.
4. Close the flap of the lap belt connector over the lap belt by closing both poppers.
5. Make sure there is no slack in the 3-point car belt.
6. Make sure that the lap belt is positioned low across the hips.
7. Use the BeSafe Pregnant only in combination with a 3-point car belt.

Pregnant belt installation in seat with isofix anchorages

1. In seats with isofix anchorages, the Besafe Pregnant can be installed with the fix connectors.
2. Remove the strap from the pregnant belt.
3. Connect both fix connectors with the isofix anchorages of the vehicle seat. (10)
4. Click! (10)

Pregnant belt installation in seat without isofix anchorages

1. In seats without isofix anchorages, BeSafe Pregnant can be installed with the strap.
2. Put the strap around the back of the vehicle seat and close the buckle. (11)
3. Click! (12)
4. Pull the strap through the buckle until it is tight. (13)
5. When the vehicle seats do not have isofix anchorage or no possibility to put the strap around the seat, BeSafe Pregnant can not be used in this partculair vehicle seat position.

Cleaning Instructions

1. The pregnant belt must be washed according to the instructions on the product.
2. DO NOT use any aggressive cleaning agents; these may harm the construction material.

Warning: The BeSafe Pregnant iZi FIX should not be used in car seats without isofix anchorages or if there is no possibility to put the strap around the seat.
Guarantee: The BeSafe Pregnant iZi FIX comes with a guarantee.

Warning: potential misuse

• DO NOT switch off the airbag or any other safety system of the particular vehicle seat where the BeSafe Pregnant is used.

• DO NOT use the BeSafe Pregnant without 3-point car belt.

• DO NOT use the BeSafe Pregnant without connection with the vehicle seat.
  Guarantee

• Should this product prove faulty within 24 months of purchase due to materials or manufacturing fault, except covers and harness straps, please return it to the original place of purchase.

• The guarantee is only valid when you use your seat appropriately and with care. Please contact your retailer, they will decide if the seat will be returned to the manufacturer for repair. Replacement or return cannot be claimed. The guarantee is not extended through repair.

• The guarantee expires: when there is no receipt when defects are caused by incorrect and improper use, when defects are caused by abuse, misuse or negligence.

References

• Developing the safest possible car seats for children of all ages | BeSafe
• Service Point | BeSafe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>