PHILIPS Hue Centris BT Ceiling Spot Light Installation Guide
- June 9, 2024
- Philips
Table of Contents
Centris BT Ceiling Spot Light
Installation Guide
Hue Centris BT Ceiling Spot Light
Warnings
– Always make sure the luminaire is detached from the mains socket
– Always make sure the DC cable is detached from the power supply
– Staring at the operating light source may cause eye injury
| # | COMPONENT | QTY |
|---|---|---|
| 1 | COVER | 2 |
| 2 | SCREW | 2 |
| 3 | BRACKET | 1 |
| 4 | SCREW | 2 |
| 5 | CONTROL GEAR – PSU | 1 |
| 6 | DIFFUSER | 1 |
| 7 | REFLECTOR | 1 |
| 8 | COVER | 1 |
| 9 | LIGHT SOURCE – LED STRIP | 2 |
| 10 | END CAP | 1 |
| 11 | CONTROL GEAR- HUE CONNECT | 1 |
| 12 | SCREW | 2 |
| 13 | CONNECTION CABLE | 1 |
| 14 | TERMINAL BLOCK | 1 |
| 15 | COVER | 1 |
| 16 | SCREW | 1 |
| 17 | SCREW | 1 |
| 18 | NUT | 1 |
| 19 | WIRE | 1 |
| 20 | NUT | 2 |
| 21 | TUBE | 2 |
| 22 | COVER | 2 |
| 23 | COVER | 1 |
| 24 | GU 10 BULB | 4 |
| 25 | COVER | 4 |
| # | Disassembly Instructions | Tools needed |
| --- | --- | --- |
| a | REMOVE BOTH COVERS (1) GENTLY LIFTING THEM OUT | FLATHEAD SCREWDRIVER |
| b | UNSCREW BOTH SCREWS (2) | CROSSHEAD SCREWDRIVER PZ |
| c | DISCONECT TERMINAL BLOCK (14) SILDING IT OUT AT THE SAME TIME PUSHING | |
| SAFETY LEVER ON IT | ||
| d | TAKE A SIDE BRACKET (3) UNHOOKING IT FROM END CAPS | – |
| e | REMOVE MARKED END CAP (10) BY UNSCREWING BOTH SCREWS (12) | TORXHEAD SCREW |
DRIVER T10
f| REMOVE COVER (23) AND SLIDE OUT COVER (22)|
g| UNSCREW BOTH TUBES (21) BY UNSCREWING NUTS (20)| SOCKET WRENCH
h| REMOVE COVER (15) BY UNSCREWING BOTH SCREWS (16)| CROSSHEAD SCREWDRIVER PZ
i| SLIDE OUT DIFFUSER (6)|
j| SLIDE OUT REFLECTOR (7)|
k| UNPLUG CONNECTION CABLES (13) FROM BOTH LIGHT SOURCE-LED STRIPS (9)|
I| REMOVE LIGHT SOURCE-LED STRIPS (9) ACCORDING INSTRUCTION 442295215544 J2
REMOVAL AND TEST INSTRUCTION FLEX LED STRIP| SEE INSTRUCTION
m| REMOVE THE COVER (8) BY TILTING IT FORWARD WHILE SQUEEZING IT WITH YOUR
FINGER BETWEEN THE CABLE EXITS|
n| SLIDE OUT CONTROL GEAR – HUE CONNECT (11) FROM THE COVER (8)|
o| UNPLUG CONNECTION CABLE (13) AND POWER WIRES FROM CONTROL GEAR – HUE
CONNECT (11)| WAGO TOOL #2065
p| DETACH WIRE (19) BY UNSCREWING SCREW (17) FROM NUT (18)| ALLEN KEY, PINCER
r| CUT OUT MAIN WIRES OF CONTROL GEAR PSU (5)| CUTTING PLIERS
s| REMOVE CONTROL GEAR PSU (5) BY UNSCREWING BOTH SCREWS (4)| ALLEN KEY
t| REMOVE COVERS (25) BY ROTATING THEM AND PULLING OUT FROM TUBES (21)|
u| REMOVE GU 10 BULBS (24) ROTATING THEM OUT|
SKU| Color| Country
---|---|---
9.15E+11| WHITE| EU/UK
9.15E+11| BLACK| EU/UK
STATUS| DESCRIPTION
Centris Hue special form 4.7W white/black -Disassembly instruction| DESIGN ID
03| 2021-08-04
---|---|---|---
DOC 12NC|
NAME T.O.| LOCAL PART ID 096940| SH. 1| | | A3-L
| CHECKED| DATE 2021-08-04|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>