IFS Single Phase Duplex Owner’s Manual
- June 9, 2024
- IFS
Table of Contents
INSTALLER FRIENDLY SERIES® (IFS)
SINGLE PHASE DUPLEX
Demand Dose or Timed
Dose, Float or C-Level™ Sensor Controlled System for Pump Control and System
Monitoring
Single Phase Duplex
Panel layout may vary with options.
Reg. Cdn Pat. & TM Off
C-Level™ Sensor US Patent No. 8,336,385; 8,567,242; 8,650,949
The Next Generation IFS duplex control panel utilizes an innovative circuit
board design enclosed in a touch-safe housing to control two 120/208/240V
single phase pumps in water and sewage applications. These newly redesigned
IFS panels feature an easy-to use color LCD interface located on the inner
door for programming and system monitoring. The panel configuration can be
easily converted in the field to either a timed dose or demand dose through
the LCD interface. Available with the EZconnex® float system.
The panel can easily be changed in the field to utilize either floats or the
patented C-Level™ sensor for continuous level monitoring. The C-Level™ sensor
senses the level in the tank and sends a signal to the panel. Pump activation
levels can be adjusted by using the LCD interface. C-Level™ CL40 sensor
operating range is 3-39.9 inches (7.6-101.3 cm). C-Level™ CL100 operating
range is 3-99.5 inches (7.6-252.7 cm). The C-Level™ Sensor features a five
year limited warranty.
LCD INTERFACE FEATURES
- Full color graphics and menu navigation encoder for easy setup
- Touch safe housing
- Pump Hand/Off/Auto Control selectable via menu navigation
- C-Level™ Sensor or Float operation selectable via menu navigation
- Demand or Timed Dose operation selectable via menu navigation
- Tank Level Indication and setpoint monitoring at-a-glance
- Lead pump is easily identified by a graphic ring around the current lead pump regardless of control mode (timed dose or demand)
- Displays remaining time in each active ON or OFF Timed Dose mode, as well as at-a-glance ON or OFF time elapsed graphic around lead pump
- RJ45 communication connector
- Flashing function for alarm beacon and horn (configurable)
- Manual alarm reset (configurable)
COMPONENTS
-
Enclosure measures 12 x 10 x 6 inches (30.48 x 24.4 x 15.24) NEMA 4X (ultraviolet stabilized thermoplastic, padlockable with integral mounting flanges, drip shield, heavy duty cover latches, and stainless steel ¼ turn set screw; for outdoor or indoor use)
-
Red Alarm Beacon provides 360° visual check of alarm condition
-
Circuit breakers provides pump power disconnect and branch circuit protection included as standard on all panels
-
C-Level™ Sensor and float connection terminal blocks
-
Controller Features:
a. Incoming Control/Alarm Power terminal blocks
b. Control/Alarm Power/System Status green LED indicators illuminate if control/alarm power is present and controller is operating
c. Controller status green LED indicators for: Power/Active, Float Input Status, Pump Run, C-Level Active
d. Normally open auxiliary alarm contacts included as standard
e. Control Power On/Off switch
f. Green LED Pump Run indicators illuminate when pump is called to run*
g. Control panel able to operate if LCD interface fails or is disconnected
h. Touch safe housing -
Alarm Horn provides audible warning of alarm condition (not shown)
-
Exterior Alarm Test/Silence push button allows horn and light to be tested and horn to be silenced in an alarm condition; alarm automatically resets once alarm condition is cleared (not shown)
-
Modbus Port (RJ45) for future expansion – eg. seal fail modules, remote monitoring, valve control, In-Site® , logging, etc. (not shown)
*In fault condition, LED indicators will be red.
Note: Added options, voltage, and amp range selected may change enclosure
size and enclosure features, and component layout.
Note: Schematic/Wiring Diagram and Pump Specification Label are located
inside the panel.
INSTALLER FRIENDLY SERIES® SINGLE PHASE DUPLEX – Demand or timed dose
float controlled system for pump control and system monitoring.
| IFN | 4 | 1 | W | 1 | 4 | 6A8AC10E |
|---|
CONTROL
PANEL| MODEL
TYPE| ALARM
PACKAGE| ENCLOSURE
RATING| STARTING
DEVICE| PUMP FULL LOAD AMPS| PUMP DISCONNECTS| FLOAT SWITCH
APPLICATION| OPTIONS (LISTED BELOW)
CONTROL PANEL| ✓| IFN| |
---|---|---|---|---
MODEL TYPE| ✓| 4| Single Phase Duplex (includes Options 6A, 8AC and 10E
as standard)| $1,599.00
ALARM PACKAGE| ✓| 1| Alarm Package (includes test/normal/silence switch,
fuse, red light, & horn)| Base
ENCLOSURE RATING| ✓| W| Weatherproof, NEMA 4X (engineered
thermoplastic)| Base
STARTING DEVICE| ✓| 1| 120/208/240V| Base
PUMP FULL LOAD AMPS| | 0| 0 – 7 FLA| Base
| 1| 7 – 15 FLA| Base
| 2| 15 – 20 FLA| $129.00
PUMP DISCONNECTS| ✓| 4| Circuit Breaker 120/208/240V| Base
FLOAT SWITCH APPLICATION| | H| Floats – Pump Down (select Option 17
below)
Timed dose = redundant off, timer enable, alarm / Demand dose = stop, start,
alarm (all systems will ship with 3 floats by default)| Base
| E| EZconnex® Float Switch System (select Option 33 or 35 below)| – $102.00
| X| No Floats| – $102.00
| C| C-Level™ Sensor (select Option 24 or 29)
Select Option 3E and/or 4A & 4D for high water alarm and/or redundant off
floats| – $102.00
NOTE: Pump down applications only. Industry practices suggest that a
secondary device, such as a float switch, be used for redundant activation of
the high level alarm and pump shut off when using the C-Level™ sensor.
PRICING WORKSHEET
IFS Duplex Base Price: $1,599.00
Alarm Package: —————————-
Enclosure Rating: —————————-
Starting Device: —————————-
Pump Full Load Amps: —————————-
Pump Disconnects: —————————-
Float Switch Application: —————————-
Total Options: —————————-
TOTAL LIST PRICE: —————————-
| OPTIONS| DESCRIPTION| LIST PRICE
---|---|---|---
| 1J| Duo Alarm Inputs| $34.00
| 3E| High Water Alarm Float (must also select Option 17)
Only Available with Float Switch Application = C| $34.00
| 4A| Redundant Off (must also select Option 4D)
Only Available with Float Switch Application = C| Timed Dose| $0.00
Demand Dose| $72.00
| 4D| Redundant Off Float (must also select Option 4A and Option 17)| $34.00
✓| 6A| Auxiliary Alarm Contact, Form C included as standard)|
$0.00
✓| 8AC| Display Board – Includes: ETM Counter, Events (Cycles)
Counter, Alarm Counter, and Override Counter (Timed Dose Only) (included
as standard)| $0.00
✓| 10E| Lockable Latch – NEMA 4X (included as standard)|
$0.00
| 10F| Lightning Arrest or (must also select Option 15A)| $285.00
| 10K| Anti-condensation Heater (must also select Option 15A)| $124.00
| 11C| Additional NEMA 1 Remote Alarm Panel| $114.00
| 11D| Additional NEMA 4X Remote Alarm Panel| $368.00
| 15A| Control/Alarm Circuit Breaker| $112.00
| 16A| 10’ Cord in Lieu of 20’ Cord (per Float)| – $3.00
| 16B| 15’ Cord in Lieu of 20’ Cord (per Float)| – $2.00
| 16C| 30’ Cord in Lieu of 20’ Cord (per Float)| $6.00
| 16D| 40’ Cord in Lieu of 20’ Cord (per Float)| $18.00
| OPTIONS| DESCRIPTION| LIST PRICE
---|---|---|---
| 17C| Sensor Float® / Internally Weighted (per Float) – Mercury| $13.00
| 17D| Sensor Float® / Externally Weighted (per Float) – Mercury| $15.00
| 17G| SJE MilliAmpMaster™ / Pipe Clamp (per Float) – Mechanical| $0.00
| 17H| SJE MilliAmpMaster™ / Externally Weighted (per Float) – Mechanical|
$8.00
| 17J| Sensor Float® / Pipe Clamp (per Float) – Mercury| $6.00
| 19F| Timer Override Float (Timed Dose Float Panel Only)| $34.00
| 24E| C-Level™ CL40 Sensor with 4’ Vent Tube and 20’ Cord| $349.00
| 24F| C-Level™ CL40 Sensor with 4’ Vent Tube and 40’ Cord| $384.00
| 24G| C-Level™ CL40 Sensor with 8’ Vent Tube and 20’ Cord| $354.00
| 24H| C-Level™ CL40 Sensor with 8’ Vent Tube and 40’ Cord| $390.00
| 24X| No C-Level™ CL40 Sensor| $0.00
| 29A| C-Level™ CL100 Sensor with 10’ Vent Tube and 20’ Cord| $359.00
| 29B| C-Level™ CL100 Sensor with 10’ Vent Tube and 40’ Cord| $396.00
| 29X| No C-Level™ CL100 Sensor| $0.00
| 33D ■| EZconnex® 3-Port, 25’, with 10’ Floats (3) / Pipe Clamp| $313.00
| 33E ■| EZconnex® 3-Port, 50’, with 10’ Floats (3) / Pipe Clamp| $355.00
| 33G ■| EZconnex® 3-Port, 25’, with 20’ Floats (3) / Pipe Clamp| $337.00
| 33H ■| EZconnex® 3-Port, 50’, with 20’ Floats (3) / Pipe Clamp| $379.00
| 35D ■| EZconnex® 4-Port, 25’, with 10’ Floats (4) / Pipe Clamp| $442.00
| 35E ■| EZconnex® 4-Port, 50’, with 10’ Floats (4) / Pipe Clamp| $496.00
| 35G ■| EZconnex® 4-Port, 25’, with 20’ Floats (4) / Pipe Clamp| $473.00
| 35H ■| EZconnex® 4-Port, 50’, with 20’ Floats (4) / Pipe Clamp| $526.00
- EZconnex® mechanically-activated, narrow angle float switches with quick release connections
California Prop 65 requires the following: WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov
www.sjerhombus.com
E-mail: customer.service@sjeinc.com
SEE PRICE BOOK FOR PRICING.
Documents / Resources
| IFS
Single Phase
Duplex
[pdf] Owner's Manual
9500054M-IFN-1ph-dplx, Single Phase Duplex, Duplex
---|---