RCA RLDED4016A-H 40 Inch D LED TV Instruction Manual

RCA RLDED4016A-H 40 Inch D LED TV

INSTRUCTION MANUAL
Before using the TV, please read this manual thoroughly, and retain it for future reference.

Model : RLDED4016A-H
This product has been manufactured and sold under the responsibility of CURTIS INTERNATIONAL LTD. RCA, the RCA logo and the two dogs (Nipper and Chipper) logo are trademarks used under license by CURTIS INTERNATIONAL LTD. -further information at www.rca-brand.com.AII other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners.

The pictures, functions and other information provided in the manual are for reference only. If it does not match the actual object, please refer to the actual product.

SAFETY PRECAUTION

CAUTION MARKING WAS LOCATED AT THE REAR PLACEMENT INFORMATION OF THE APPARATUS.

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

• The lightning flash with arrowhead symbol, A within an equilateral triangle,is intended to alert the user to the presence of uninsulated”dangerous voltage”within the product’s enclosure that may beof sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral Triangle is intended to alert the user to The presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

DANGER OF EXPLOSION IF BATTERY ISINCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO REVENT FIRE OR SHOCK HAZARD, DO NOT
• EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
• SHOULD ANY TROUBLE OCCUR, DISCONNECT THE AC POWER CORD AND REFER SERVICING TO A QUALIFIED TECHNICIAN

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

PLACEMENT INFORMATION

• Do not use this unit in places that are extremely hot, cold, dusty or humid.
• Do not restrict the airflow of this unit by placing itsomewhere with poor airflow, by covering it with a cloth, by placing it on bedding or carpeting

SA FE TY INFORMATION

• When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power cord.

RATING PLATE LOCATION
The rating plate is located on the rear of the unit.

FCC STATEMENTS

NOTE : This unit has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this unit does cause harmful interference to radio or television reception, which can be determined by turning the unit off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the unit and receiver.
• Connect the unit into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the unit

“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
10. A polarized plug has two blades with one wider than the other.
11. A grounding type plug has two blades and a third grounding prong.
12. The wide blade or the third prong is provided for your safety.
13. If the provided plug does not fit into your wall outlet, consult an electrician for the replacement of the obsolete outlet.
14. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
15. Only use attachments/ accessories specified by the manufacturer.
16. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
17. When a cart is used, use caution when moving the cart I apparatus combination to avoid injury from tip-over.
18. Unplug this apparatus during lightning storms or when unused for long periods of time.
19. Refer all servicing to qualified service personnel. Servicing is required when the apparatuses have been damaged in any way, such as the power cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
20. The mains plug is used as a disconnect device, the disconnect device shall remain readily operable

PERSONAL SAFETY NOTICE

• ALWAYS read and follow all instructions for the installation and use of the TV.
• Place the TV in a location that is level and sturdy.
• DO NOT place the TV on a furniture with drawers that can be used as steps by small children.
• DO NOT allow children to pull the TV or climb on the furniture where the TV is placed.
• DO NOT allow children to play in front of or around the TV.
• ALWAYS route all the cables connecting to the TV so the cables cannot be easily pulled and grabbed by children.
• When installing the TV on a wall, please purchase a TV mount recommended by a professional TV installer, and follow the installation instructions that come with the TV mount.
• Before installing the TV on a wall, please check to make sure the wall structure can support the weight of the TV and the mount. If in doubt, please ask the advice from a professional TV installer.
• People should not be turning on the TV before checking that the power cord is inserted “well”.
• People should be checking the voltage of the AC power receptacle and the TV before plugging in the TV

ACCESSORIES

Please check and Identify the supplled accessories.

• Remote control ………………………………………………………………………………………………….. x 1
• Battery(AAA) ………………….•..•………………………•..•………………………•..•……………………… x 2
• Instruction Manual …………………………………………………………………………………………….. x 1
• Base stand and 4 base stand screws ……………………………………………………………….. x 1
• Troubleshooting instructions card …………………………………………………………………… x 1

GETTING STARTED

USING THE REMOTE CONTROL

• Point the remote control at the remote sensor located on the unit.
• When there is a strong ambient light source, the performance of the infrared remote sensor
• may be degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).

TO INSTALL THE BATTERIES

1. Open the battery door.
2. Insert 2″AAA”batteries

BATTERY REPLACEMENT

When the batteries become weak, the operating distance of the remote control is greatly reduced and you will need to replace the batteries
CAUTION: Danger of explosion if battery is incorrectly replaced

NOTES

• If the remote control is not going to be used for a long time, remove the batteries to avoid damage caused by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become weak.
• Weak batteries can leak and severely damage the remote control

WARNING:

• Do not dispose batteries in a fire. Batteries may explode or leak.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

CONTROL REFERENCE GUIDE

REMOTE CONTROL

• Format: NEC
• Customer code: A05F
• Code location Chart

1. POWER ( ): Tums the lV on or off.
2. MUTE ( ): Reduces the TV volume to its minimum level. Press again to restore the volume.
3. NUMBER BUTTONS: Press 0-9 and select a TV channel directly when you are watching TV.
4. “ “: To switch the channel digit.
5. Recall ( ): Returns to the previous channel.
6. AUDIO: Switch the audio channel To TV mode.
7. FAV-JFAV+.: Scan up or down through the current favorite channel list.
8. FAV: Show favorite channel list.
9. VOL+ or VOL-: Increases or decreases the 1V volume.
10. CH+ or CH- : Scans up or down through the current channel list.
11. P. MODE: Switches between the preset picture mode.
12. S. MODE: Switches between the preset sound mode.
13. INPUT: Accesses the available input channels, Use the arrows to highlight options, and press OK to select.
14. SLEEP: Select the sleep timer, after which the lV will shut off automatically.
15. ASPECT: Switches between the preset screen size mode.
16. INFO: Press to display the current program information on the screen.
17. Arrows ( ◄/ ► ): Uses the four arrows to highlight different items in the TV menu or change the value.
18. OK: Enter and confirm button.
19. MENU: Accesses the Main Menu, or return to the upper level of a sub-menu.
20. EXIT: Exits the current menu or function.
21. CH.LIST: List adecanales.
22. EPG: Shows Electronic Program Gulde(use In the DTV mode).
23. PLAY/PAUSE: Play or Pause media files
24. STOP: Stop playing media files.
25. FR /FF: Fast review of fast forward.
26. PREV /NEXT: Select the previous or next media file.
27. CC: Select the closed caption.
28. MTS: Select the multi-channel television sound.
29. FREEZE: Freeze the current screen frame, and press again to return to normal.
30. REPEAT: Select the previous or next media file.
31. RED/GREEN/YEUOW/BLUE: The control function of these buttons does not apply to this model.

NOTE:

• All pictures in this manual are examples, only for reference, actual product may differ from the pictures.
• The buttons not mentioned here are not used.

CONTROL REFERENCE GUIDE

FRONT VIEW

About remote control working distance and angle, see next page.
Power/Standby Indicator: Blue and red dual-color LED. It shows red when the TV is turned off and blue when turned on. Remote Control Sensor: Remote control lR sensor, which receives infrared ray sent by remote control.
NOTE : If there is a protective film around the screen, remove the protective film before using the TV.

BOTTOM VIEW

1. POWER(  )/OK: In the off mode, Short press to turn on the TV. In the on mode, Short press to achieve OK function, long press to achieve POWER function.
   POWER ( ):Turns the TV on and off.
   OK: Enter and confirm.

2. VOL-: Decreases the volume. In the TV menu system, it acts like the left arrow on the remote control and can be used to select menu options.

3. VOL+: Increases the volume. In the TV menu system, it acts like the right arrow on the remote control and  can be used to select menu options.

4. MENU/CH-: Short press to achieve CH- function, long press to achieve MENU function.
   MENU: Displays the TV Main Menu.
   CH-: Scans down through the channel list. In the TV menu system, it acts like the down arrow on the remote control and can be used to select menu options.

5. INPUT/CH+: Short press to achieve CH+ function, long press to achieve INPUT function.
   INPUT: Displays the Source Select List.
   CH+: Scans up through the channel list. In the TV menu system, it acts like the up arrow on the remote control and can be used to select menu options

BACK VIEW

• OPTICAL: Connect to an external digital audio device.
• HDMl1/2/3: Select HDMl1/HDMl2/HDMl3 source input.
• RF: Connect the antenna.
• VGA: Connect a computer to these jacks.
• PC Audio in: Connect the Audio output jack of PC.
• CVBS: Connect an AV device that has composite video jacks, such as a VCR or DVD player.
  • L: Left audio channel connection.
  • R: Right audio channel connection.
• USB Media Player: Connect USB device, such as flash disk to access media function of TV. (Support format: TXT for Text. MP3 for music. JPG and JPEG for photo).
  NOTE: It can not play in video format.
  EARPHONE: Connect a 3.5mm headphone for personal audio.

WALL MOUNT INSTALLATION

INSTALLING/ REMOVING THE BASE STAND
WARNING : The LED Display is very fragile, and must be protected at all times when removing the base Stand .
Be sure that no hard or sharp object or anything that could scratch or damage the LED display comes into contact with it Do NOT exert pressure on the front of the unit at any time because the screen could crack.

1. Disconnect all cables or cords connected to the unit.
2. Lay the unit down on a flat surface with the back side facing up Please make sure to place a soft cushioned material ( such as a pillow or thick piece of foam) beneath the screen.
3. To remove the base stand, loosen the screws off the holes then pull downwards to release the base stand.

MOUNTING ON THE WALL
This unit is VESA-compliant and is designed to be wall-mounted with a VESA- compliant S”x 8″ (200mm x200mm) mounting kit designed for flat-panel TVs (not supplied). The length of screw should not exceed 8 mm

NOTE
Remove the base stand before mounting the unit on the wall.

Installation

Your TV is packaged with the stand and the cabinet separated. Before using the TV, install the stand as described below, or if you want to mount it to a wall, see page 7 for mounting advice; the wall mount itself is not supplied.

IMPORTANT!

• Make sure the TV set is unplugged from the power supply before installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend you ask someone to help with installation and/or removal of the stand.

Attaching the stand

• Step 1
  Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV monitor flat on top, with the screen side facing down, as illustrated on the right (1 ).

• Step2
  Align the screw holes on the stand and the bottom of the TV, as illustrated on the right (2).

• Step 3
  Tighten the screws (supplied) with a screwdriver to affix the stand to the panel, as illustrated on the right (3).
  NOTE : Do not apply excessive force as this may damage the screw holes.

CONNECTIONS

CONNECTING A TV ANTENNA/ CABLE/ SATELLITE

To view television channels correctly, a signal must be received from one of the following sources:

• An indoor or outdoor aerial antenna
• A cable system
• A satellite system

NOTE
For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you require the use of a temporary antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas. Only when you are in close proximity to a transmitter will a temporary antenna reproduce a signal as strongly as a fixed antenna.

CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.

CONNECTING DEVICES WITH A COMPOSITE VIDEO OUTPUT

• To connect A/V devices such as a VCR, video game system or camcorder.
• Connecting to a VCR/ Video Game System/ Camcorder
• Connect the AUDIO /VIDEO cable (not included) as shown.
• Make sure you connect the cable from the other equipment ( AUDIO and VIDEO OUT) to this unit (AV in)

NOTE

• Please refer to the user manual for the other equipment for more information.
• Composite video input

CONNECTING A HIGH-DEFINITION (HD) SOURCE USING HDMI CONNECTION

• HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by
• DVl-compliant or HDMlcompliant displays.
• HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

Connect the HDMI cable (not included) as shown:
Make sure you connect the cable from the source equipment ( HDMI OUT ) to this unit ( HDMI IN ).

CONNECTING A PC

• Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and an audio cable (not included) as shown.
• Make sure you connect the cable from the computer (VGA and AUDIO – PC OUT ) to this unit (VGA and AUDIO – PC IN ).

CONNECTING HEADPHONES

• Turn down the volume before connecting the headphones to the unit, then adjust the volume to your desired level.
• When headphones are connected, no sound will come from the front speakers.

NOTE
Avoiding listening to sound at high Levels for prolonged periods of time. This may be harmful to you and may cause hearing loss.

CONNECTING THE POWER CORD

You can power on your TV unit before you make sure the power cord is inserted well. At the same time, please check that the rated voltage of your unit matches your local Voltage.

NOTE

• Insert the power plug fully into the socket outlet. (If the power plug is loose, it could generate heat and cause fire .)
• Ensure that the power plug is easily accessible.
• Ensure the earth pin on the power plug is securely connected to prevent electrical shock.
• Do not touch the power plug with a wet hand. (This may cause electrical shock)
• Do not use any power cord other than that provided with this TV. (This may cause fire or electrical shock.)
• Do not damage the power cord. (A damaged cord may cause fire or electrical shock.)
• Do not move the TV with the cord plugged in the socket outlet.
• Do not place a heavy object on the cord or place the cord near a high-temperature object.
• Do not twist the cord, bend it excessively, or stretch it.
• Do not use a damaged power plug or socket outlet.

Connection to a Home Theater Audio System

For BEST audio performance

Connecting to a Home Theater System Dolby Digital can deliver optimal 2 channel stereo or surround sound with five discrete full range channels plus a sixth channel for a subwoofer.
Enjoy optimal sound reproduction from your system with a Dolby Digital amplifier that incorporates a digital optical input. Connect an optional digital cable directly to the television’s optical audio output to listen through all inputs except VGA.
(The VGA does not support digital audio)

How To Setup Digital Audio Output
Press the MENU button on the remote control Press the right ► arrow button to select sound Press the down T arrow button to highlight Spdif type ► Raw, PCM or Off.

NOTE : Refer to the User Manual from your home theater equipment for recommended audio settings.

INITIAL SETUP

PUTTING THE UNIT ON A PROPER PLACE

• When you turn on your television set for the first time, be sure to place it on a solid stable surface.
• To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator).
• Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit.

TURNING THE UNIT ON FOR THE FIRST TIME

• After you have initially connected your TV antenna or cable, turn the television ON.
• A screen will display asking you to run a Channel Auto Scan to search and receive available local digital channels.
• It is here where you will select antenna options and run Channel Auto Scan.

SOURCE SELECTION

1. Press the INPUT button on the remote control.
2. Use the  or  button to select the options (TV.AV, HDMl,PC, USB Media Player) and select any of them using the OK button. (The screen will change to your desired source).

Note:
Before watching please make sure all necessary cables and devices are connected.

TV SETUP

CHANNEL MENU

• Press MENU button to display the main menu.
• Press ◄ / ► button to select CHANNEL in the main menu.it will highlight the first option.

1. AIR/CABLE
   This feature allows you to switch between air (such as using antenna) and cable.

2. AUTO SCAN
   This feature searches channels automatically for you.

3. FAVORITE
   This feature gives the favorite list of channels added by you.

4. CHANNEL LIST
   This feature shows the list of stored channels.

5. SHOW/HIDE
   This feature tells you if you have chosen for the channel to be skipped.

6. CHANNEL NUMBER
   This feature tells you what channel you are currently on.

7. CHANNEL LABEL
   This feature changes the name of the channel.

Please Note:
The channel options are only available when you select TV as your SOURCE. When you open the OSD menu on other sources (HDMI, Component, AV)these options will be grayed out.

PICTURE MENU

• Press MENU button to display the main menu.
• Press ◄ / ► button to select PICTURE in the main menu,it will highlight the first option.

1. PICTURE MODE
   This feature changes various color modes for the TV.

2. BRIGHTNESS
   This feature changes the picture’s detail in dark colors.

3. CONTRAST
   This feature changes the difference between dark and bright objects.

4. COLOR
   This feature changes the amount of color in the picture.

5. TINT (The “Tint” item only works in user mode.)
   Adjusting tint will affect the skin tone. -50 will increase red, +50 will increase green. Ideally, the tint scale on the TV OSD should show the red/green color for easy adjustment.

6. SHARPNESS
   This feature changes the picture quality.

7. COLOR TEMPERATURE
   This feature adjusts the color temperature of the TV, giving warm, normal, cool.

ADVANCED SETTINGS

• ASPECT RATIO This feature changes the various aspects of the TV’s video. (Aspects include wide, zoom, cinema.normal).
• NOISE REDUCTION This feature reduces general pixilation by blurring them.
• DYNAMIC CONTRAST This feature allows the TV to automatically adjust the contrast of the TV depending on the picture you are viewing.
• HDMI MODE Video Mode will do overscan, use different aspect ratio; Graphic Mode do not overscan, display 100% video.

SOUND MENU

• Press MENU button to display the main menu.
• Press ◄/►button to select SOUND in the main menu.it will highlight the first option.

1. SOUND MODE
   Allow the selection of an audio-enhancement technique: Standard/Music/Movie/User/Sports. Alternative: you may press the S.MODE button to select the sound mode directly.

2. BASS
   Control the relative intensity of lower-pitched sounds. (For User mode)

3. TREBLE
   Control the relative intensity of higher-pitched sounds. (For User mode)

4. BALANCE
   Adjust the relative volume of the speaker in a multiple speaker system.

5. MTS
   This feature adjusts the second audio programming in analog channels.

6. AUDIO LANGUAGE
   This feature adjusts the digital second audio programming in digital channels.

7. DIGITAL AUDIO OUTPUT
   This feature adjusts the digital audio output.

8. SURROUND SOUND
   This feature adjusts the dimensional surround effect on or off (for built-in speakers only).

9. AVL
   This feature adjusts the auto volume leveler enabling volume protection from overly loud commercials.

Please Note:
AUDIO LANGUAGE and MTS are dependent on the broadcasting station’s support and are only available under the source TV.

TIME MENU

• Press MENU button to display the main menu.
• Press ◄/►button to select TIME in the main menu.it will highlight the first option.

1. SLEEP TIMER
   This timer automatically turns off the TV at the designated time.

2. TIMEZONE
   This option adjusts the global time zone for the TV.

3. DAYLIGHT SAVING TIME
   This option toggles the daylight saving time feature.

4. TIME FORMAT
   This option adjusts the display format for the time.

5. AUTO CLOCK
   This option enables the TV to sync time with the antenna.
   (Put it on AUTO if you have an antenna attached to the TV. If you have CABLE or SATELLITE or anything else please use make sure AUTO CLOCK is turned off)

6. CLOCK
   This option adjusts the time and date of the TV.You need to disable AUTO CLOCK in order to use this function.

Please Note:
The TIME function will only keep accurate time if the TV is plugged into a power source.
If the TV is unplugged or the power strip is turned off, the TV’s time will not be accurate.

SETUP MENU

• Press MENU button to display the main menu.
• Press ◄ / ► button to select SETUP in the main menu,it will highlight the first option.

1. MENU LANGUAGE
   This option changes the language of the TV’s OSD menu.

2. TRANSPARENT
   This option changes the transparency of the menu allowing background TV images to show through.

3. OSD TIMEOUT
   This option changes the time which the TV’s OSD menu automatically goes off.

4. CLOSED CAPTION
   This option displays words on the TV.

5. OVER SCAN
   Press ◄ / ► button to select(On / Off).

6. Source LABEL
   This option changes the source names to your personal preference.

7. OTHER SETTINGS
   This option adjusts miscellaneous options of the TV.
   AUDIO ONLY-This option turns off the screen while the audio is still playing.

8. RESTORE DEFAULT
   This option restores all the changes in the OSD menu back to the default factory settings.

9. SETUP WIZARD
   This option enables the TV to show you the setup wizard of the TV again.

10. CEC
    Lets you control HDMI CEC-compatible devices.

11. VIDEO DESCRIPTION
    Change from the main audio to the secondary audio stream that contains video description, and vice versa.

12. VOICE GUIDANCE
    Set the auto voice guidance control.

Please Note:

• Closed captioning is only available under AV and TV ports.
• Closed captioning depends on your TV program’s support. Sometimes due to the TV channel or the signal, closed captioning will not be available.
• In United States, closed captioning under analog signals is CC1.
• In United States, closed captioning under digital signal is Service1.

LOCK MENU

• Press MENU button to display the main menu.
• Press ◄ / ► button to select LOCK in the main menu.it will highlight the first option. Press “0000” for the lock password.

1. CHANGE PASSWORD
   This option allows you to change the LOCK menu password.

2. KEY LOCK
   Block or unblock the Key Lock.

3. SYSTEM LOCK
   This option enables parental locking and filtering for the TV.

4. INPUT BLOCK
   Block or unblock the input sources.

5. US RATING
   This option filters US TV programming and movies.

6. CANADA RATING
   This option filters CANADA TV ratings.

7. RRT SETTING
   This feature is a downloadable rating filter based on TV broadcasts. With the transition of TV broadcasts to digital, future changes, and enhancements in how TV shows are rated for content are possible.

8. RESET RRT
   This option resets the RRT settings.

Please Note:
Please refer to RATINGS EXPLAINED for more information on ratings definitions.
Downloadable rating and clear downloadable data might be grayed out depending on the Tvs stations support.
RRT5 options are based on TV broadcasts, if it is grayed out, then it is not available in your region.

USB Media Player

USB Media Menu

• Before operating the Media menu, Plug in a USB device, then press the INPUT button.
• Press T / A button to select USB Media Player in the Source menu, then press Enter button to enter.
• Press ◄/► button to select the option you want to adjust in the main Media menu, then press Enter button to enter.

Photo Menu

• Press ◄/ ► button to select PHOTO in the main menu, then press Enter button to enter.
• Press ◄ / ► button to select drive disk you want to watch, then press Enter button to enter.
• Press ◄/► button to select the return option to back to the previous menu.
• Press ◄/► button to select the file you want to watch in the file selecting menu, then press the media button to display the picture.
• Press ◄/► button to select the file folder you want to search in the file selecting menu, then press Enter button on your remote control to enter the sub-menu.

Music Menu

• Press ◄/► button to select MUSIC in the main menu, then press Enter button to enter. Press the menu button to return back to the previous menu and exit the menu to quit.
• Press ◄/► button to select the drive disk you want to watch, then press Enter button to enter.
• Press ◄/► button to select the file you want to watch in the file selection menu, then press Enter button to add the file to the playlist and press the media button to display and operate file details.
• Press ◄/► button to select the menu in the bottom you want to run, then press Enter button to operate.
• Press the Menu button to back to the previous menu and the exit button to quit the entire menu.
• Press the button to hide the menu into the button.

Text Menu

• Press ◄/► button to select TEXT in the main menu, then press Enter button to enter.
• Press the menu button to return back to the previous menu and exit menu to quit.
• Press ◄/► button to select the drive disk you want to watch, then press Enter button to enter.
• When reading Textbooks, press FF button of the remote to the next page, and press FR button of the remote to the previous page. Press the Next button of the remote to the next part or chapter, and press the PREV button of the remote to the previous part or chapter. Press the EXIT button of the remote to return the submenu.

Support format : TXT for Text. MP3 for music. JPG and JPEG for photo.
NOTE : It can not play video format.

DISPLAY MODE

PC FORMATS

NOTE:

• This product does not support the display mode not listed above.
• In order to achieve the best display effect, please select the above-listed 5 display modes input signal.
• Because of the difference of display drivers output signal (especially non-standard signal output), the display image may appear little disturbance which can be adjusted on the PC menu.
• To prolong this unit’s service life, please set your computer to power management mode.

VIDEO FORMATS

NOTE:

• The above listed formats are also related to the AV devices you are about to connect. Before you connect this unit with others please read all instructions carefully and make sure all necessary cables are connected.
• This unit may be incompatible with some other formats which are not meet the above conditions.

SPECIFICATION

This manual is only for your reference. Specifications are subject to update without prior notice.

TROUBLESHOOTING GUIDE

To make a warranty claim, please email support@curtiscs.com or call 1-800-968-9853.

Warranty

1 Year Warranty

• This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.
• This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).
• We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
• For faster service, locate the model, type, and serial numbers on your appliance.

90 Day Warranty

• Remote controls are warranted from date of purchase for a period of ninety (90) days, provided remote has been used as intended and free from damage.
• ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE.
  Please have the following information available when you contact the Support Team:

For service assistance and product information, please call : 1-800-968-9853.
Pour obtenir assistance et information appelez: 1-800-968-9853. Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>