DOMETIC TRT140 Awning Tent Instruction Manual

DOMETIC TRT140 Awning Tent Instruction Manual Introducing

Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.

By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit documents.dometic.com.

Related documents

Europe

Find the installation and operating manual of the rooftop tent online at https://documents.dometic.com/ ?object_id=85078

Australia and New Zealand

Find the installation and operating manual of the rooftop tent online athttps://documents.dometic.com/ ?object_id=85077

Explanation of symbols

DANGER!
Safety instruction: Indicates a hazardous situation that, if not avoided, will
result in death or serious injury.
  WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE
Supplementary information for operating the product.

Safety instructions

DANGER! Failure to obey this instruction will cause death or serious injury.

Hazard of carbon monoxide poisoning

• Never use a fuel-burning appliance such as barbecues or gas heaters inside the awning tent. The burning process produces carbon monoxide which accumulates inside the awning tent as there is no flue.

WARNING! Failure to obey these warnings could result in death or serious injury.

Fire hazard

• Keep all flame and heat sources away from thistent fabric.
• Ensure you know the fire precaution arrangements on the site.
• Do not cook inside the awning tent or use open flames.

Beware of suffocation

• Ensure ventilation openings are open all the time to avoid suffocation.

CAUTION! Failure to obey these cautions could result in minor or moderate injury.

Risk of injury

• This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the device by a person responsible for their safety.
• Do not allow children to play around the awning tent and ensure that suitable protective footwear is worn. Guy lines are a trip hazard and pegs can be sharp.
• Cleaning and user maintenance may not be carried out by unsupervised children.
• Keep passage ways clear.

Scope of delivery

Intended use

This awning tent is suitable for:

• Attaching to the rooftop tent TRT 140 AIR

• Light to moderate weather

• Touri
  This awning tent is not suitable for:

• Very strong winds or snowfall

• Seasonal pitch or commercial use

This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.

The manufacturer accepts no liability for any injury or damage to the product resulting from:

• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual

Dometic reserves the right to change product appearance and product specifications.

Using the awning tent

CAUTION! Risk of injury
Never open the zipper on the protective sleeve while an air pole is inflated. This will result in the air pole bursting.

NOTICE! Material damage
Do not open or close the zippers by force

Before first use
Familiarize yourself with the product by carrying out a test set up before the product is used for the first time. Check if the scope of delivery is complete.

Weathering your product before first use

The product is manufactured with materials that require preparation before use to maximize its weatherproofing.

1. Fully set up the product outside when rain is expected or where you can hose the outside of the product to become thoroughly wet.
   This process is known as weathering. The weathering process tightens the fabric, and allows the cotton in the sewing thread to swell and fill the holes made by the sewing needle during the manufacturing process.

2. Allow the product to dry thoroughly before packing away.  By following this process before first use, will ensure that the product weatherproofing will improve with subsequent soakings.

Setting up the awning tent

  CAUTION! Risk of injury and material damage

• Do not use any type of compressor designed to inflate car tires.
• Only inflate the air poles up to a maximum pressure of 9psi/0.62bar.

NOTE

• The awning tent comes with heavy duty pegs. These will be suitable for many sites but for some types of ground special pegs will be needed. Ask your dealer.
• Drive the pegs at a 45° angle away from the awning tent into the ground.
• Peg each guy line in-line with the seam it starts from.

Keep the following tips in mind while setting up the awning tent:

• The figures provide a general overview of the set-up. The actual set-up will vary slightly based on the model of awning tent.
• Get help. The set-up is easier with more people.
• After standing the awning tent upright, check the corner pegs and re-peg if necessary. The groundsheet on the inside should be taut and in a rectangular shape.
• Peg the guy lines so that the awning tent is under tension without distorting the shape.
• If available, attach the storm straps.
• Check the guy lines from time to time to ensure adequate tension, if necessary use the runners to adjust.

Set up the awning tent as follows:

1. To protect the awning tent from dirt and damage, lay down a groundsheet or footprint before unpacking.
2. Unpack the awning tent.
3. Separate and identify the different components
4. To set up the awning tent proceed as shown (fig.3, page 3 – fig.a, page 6).
   
   
   
   
   
   
   
   
   

Dimensions

Dismantling the awning tent

NOTICE! Damage hazard
Do not use force when dismantling the awning tent. Otherwise you might damage any material.

1. Remove any dirt on the outside.
2. If the awning tent is wet or damp, dry thoroughly.
3. Remove all lines and straps.
4. Remove all pegs.
5. Close all zippers.
6. Open the valve on the air pole.
7. Wait until most of the air has been expelled.
8. Carefully detach the awning tent from the extrusion channel.
9. Open the buckles to detach the awning tent from the rooftop tent.
10. Fold or roll the awning tent towards the valve to expel more air.
11. When deflated, roll the awning tent to fit into the carry bag.
12. Ensure that all parts are clean before packing them into the carry bag.

Storing the awning tent

1. Clean the awning tent.
2. Air fully and ensure the awning tent is totally dry before packing away.
3. Store in a well ventilated dry place.

Cleaning and maintenance

  NOTICE! Material damage

• Do not use sharp or hard objects or cleaning agents for cleaning.
• Do not use alcohol based materials, chemicals, soap and detergents for cleaning.

NOTE

• Fully set up the awning tent for cleaning.
• Choose a sunny day for cleaning to ensure the material will dry thoroughly.
• If necessary, clean the awning tent with clean water and a soft brush.
• Remove bird droppings and tree resin as soon as possible to avoid permanent damage to the material.
• Apply impregnation against water and UV radiation before each trip.

Troubleshooting

  NOTE

• During first exposure to water there may be some moisture at the seams. Through this moisture the threads will swell and fill the holes that are created in the sewing process.
• A fully equipped spare parts kit should include
  • Waterproofer
  • Repair tape and repair solution
  • Silicone spray for the zippers
  • Spare pegs

• Check that the valve is fully screwed into the air pole.
• Check if the inflation tube is twisted at the valve.This may be indicated by noise. Untwist the inflation tube.
• Check that the electric pump is working.

Air poles are kinked|

• Add more air (9 psi/0.62 bar).

Air leak|

• Check that the valve is fully screwed into the air pole and the ring seal is in place.
• Check that the cap of the valve is done up tightly.
• Check for punctures, see chapter “Repairing a puncture in the air pole” on page 10

Water leak|

• Check for leaky seams, damaged tapings and moist areas.
• If you cannot find any leaks, see chapter “Condensation” on page 10.
• If you find any leaks, apply seam sealant.

Rip in the fabric|

• Use repair tape to seal the fabric.
• Have repairs carried out by an authorized specialist.

Condensation

All awning tents suffer from internal condensation if one or more of the following conditions apply:

• High air humidity
• High ground moisture
• A drop in temperature

Severe condensation can run down the inside of the roof and drip off ties, tapes and other internal fittings and can be mistaken for leaking.

• Increase ventilation by opening doors and/or windows.
• Install a waterproof groundsheet.

Repairing a puncture in the air pole

If the air pole loses air, proceed as follows:

1. Unzip the outer sleeve holding the air pole.
2. Remove the air pole.
3. Unzip the protective sleeve to expose the inflatable tube.
4. Submerge the tube in water.
5. Blow some air into the inflatable tube to locate the puncture. Use repair tape and repair solution to seal the hole.
6. Zip the inflatable tube back into the protective sleeve.
7. Zip the air pole back into the outer sleeve.
   • Also observe the information given in fig.12, page 6.
     

Warranty

Europe
The statutory warranty period applies. If the product is defective, please contact your retailer or the manufacturer’s branch in your country (see dometic.com/dealer).

For repair and warranty processing, please include the following documents when you send in the product:

• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault

Note that self-repair or non-professional repair can have safety consequences and might void the warranty.

Australia and New Zealand
If the product does not work as it should, please contact your retailer or the manufacturer’s branch in your country (see dometic.com/dealer). The warranty applicable to your product is 2 year(s). For repair and warranty processing, please include the following documents when you send in the device:

• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault

Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

New Zealand only
This warranty policy is subject to the conditions and guarantees which are mandatory as implied by the Consumer Guarantees Act 1993(NZ).

Local support
Please find local support at: dometic.com/dealer.

Warranty conditions
The warranty covers manufacturing defects, materials and parts. The warranty does not cover fading of the cover and wear and tear due to UV radiation, misuse, accidental damage, storm damage, or permanent, semi-permanent or commercial use. It does not cover any resulting damage. Please contact your dealer for claims. This does not affect your statutory rights.

Disposal

• Place the packaging material in the appropriate recycling waste bins wherever possible.
• Consult a local recycling center or specialist dealer for details about how to dispose of the product in accordance with the applicable disposal regulations.

Costumer Support

OUR LOCAL
DEALER
dometic.com/dealer
YOUR LOCAL
SUPPORT
dometic.com/contact
YOUR LOCAL
SALES OFFICE

dometic.com/sales-offices

References

• Dometic United Kingdom | Your outdoor adventure starts here | Dometic Dometic United Kingdom
• Contact Us | Support for You | Dometic USA
• Find a Dealer | Dometic USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>