SPORTSMAN GPDR Gas Powered T-Post Driver Owner’s Manual
- June 9, 2024
- SPORTSMAN
Table of Contents
GPDR Gas Powered T-Post Driver
Product Information: Gas Powered Sportsman T-Post Driver
The Gas Powered Sportsman T-Post Driver is a powerful tool designed for driving metal fence posts, T-posts, and ground rods into the ground. The driver is powered by a 2-stroke gasoline engine that provides high impact energy to drive the posts into the ground quickly and efficiently.
PACKAGE CONTENTS
The package includes the following items:
- 1x Pile Driver
- 1x Piling Head
- 2x Sleeves
- 1x Lubricating Grease
- 1x Fuel Mix Container (empty)
- 1x Toolkit
- 1x Manual
The item number for the Gas Powered Sportsman T-Post Driver is GPDR, and the UPC number is 0 27077 08178 7. The weight of the case is 38.0 lbs, and the cubic ft. is 3.1. The product is manufactured by Sportsman and can be contacted at 950 Hoff Road, O’Fallon, MO63366. For any queries, customers can contact the phone number 636.532.9888 or fax at 636.537.1055.
Product Usage Instructions:
- Before using the driver, read the manual carefully and familiarize yourself with the product.
- Fill the fuel mix container with a gasoline-oil mixture in a ratio of 25:1 (gasoline to oil).
- Attach the piling head to the top of the pile driver.
- Insert the sleeve onto the pile driver and align it with the piling head.
- Place the driver on top of the post to be driven into the ground.
- Press the driver down firmly onto the post, and start the engine by following the instructions in the manual.
- Allow the driver to operate until the post is driven into the ground to the desired depth.
- Once the post is driven in, turn off the engine and remove the driver from the post.
- Repeat steps 4-8 for each post that needs to be driven into the ground.
- After use, clean the driver and store it in a safe place.
SPECIFICATION
- 2- Cycle Gas Powered Engine
- Drives T-Posts in a matter of seconds
- Portable and lightweight for easy handling Equipped with internal vibration dampening for less irritation when operating.
- Overall Size (w/ Piling Head): 13.4″L x 9.8″W x 29.5″H Displacement: 32.7cc
- Impact Frequency: 1700-2230 min-1
- Impact Energy: 25~45J
- Max Power and Speed: 900w (1.2HP) and 9000r/min Max Torque and Speed: 1.45N.m and 5000r/min Engine Type: Single Cylinder, Air Cooling, 2 Stroke Fuel Type: 2-Cycle mixed oil (50 gasoline: 1 motor oil) Fuel Tank
- Capacity: 0.24 gallons
- Fuel Consumption Rate:≤ 0.5L/h
- Carburetor Type: MZ10.7
- Spark Plug Type: L6T
- Starter System: Recoil start
- Piling Head Size:Ф49mm & Ф69mm (2-2.3 Inch) Weight: 34 lbs. 30 oz. fuel capacity, with see-through construction to check fuel levels
Package: Color Box
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>