eufy E110 Smart Lock User Guide

: June 9, 2024
: Eufy

Table of Contents

eufy E110 Smart Lock
AT A GLANCE
INSTALLATION
SETTING THE SYSTEM
NOTICE
FCC Statement
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eufy-LGOO

eufy E110 Smart Lock

eufy-E110-Smart-Lock-PRODUCT

AT A GLANCE

Keypad
Status Light
- Blue: Door unlocked
- Orange: Door locked
- Red: Abnormal
Keyway
USB-C Port: Charges the lock in emergency situations.

eufy-E110-Smart-Lock-FIG 2

Battery Compartment
Serial Number:Use to add the lock to the eufy Security app.
QR Code:Use to add the lock to the eufy Security app.
SYNC Button:Use to pair the lock with the doorbell chime.
Thumbturn
Screw Hole

INSTALLATION

What You Need

Step 2. Deadbolt Installation Set
Step 3. Exterior Assembly
Step 4. Interior Assembly Installation Set eufy-E110-Smart-Lock-FIG
5
Step 5. Strike Plate Installation Set

Step 1. Prepare the Door

Remove the existing lock and check your door.
Check if your door has holes like the one below. Standard US doors are already compatible.

If not, follow the template to drill holes on your door.

Step 2. Install Deadbolt

Check your door to see if the deadbolt requires adjustment.
Insert and screw the deadbolt into the doorframe.

Step 3. Install Exterior Assembly

Remove the spacer before installation if you have a 38 mm cross bore.

Step 4. Install Interior Assembly

Detach the back cover from the interior assembly.
Run the wires through the back cover.
Secure the back cover with screws.
- (Optional) If the back cover is not fastened tightly to the door, use the additional screw provided.
Wire to the interior assembly.
Mount the interior assembly. Make sure both wires are tucked into the cabin on the back of the interior assembly.
Install the 4 AA batteries provided with the correct polarity. Don’t put on the cover until the system setup is done in the app.

Step 5. Install Strike Plate

SETTING THE SYSTEM

Download and install the eufy Security app, then sign up for an account.
Follow the in-app instructions to add the Smart Lock E110 to your device list.
- Please visit https://support.eufylife.com/s/ or scan the QR code for more information.

NOTICE

Warning

replacement of a battery with an incorrect type that can defeat a safeguard;
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Notice (United States Of America)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004
Telephone: 1-800-988-7973

Notice (Australia)
Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.
It is recommended to supply the device in an environment with a temperature that ranges from 5°C~25°C.
When supplying, please place the device in an environment that has a normal room temperature and good ventilation.
Warning:

replacement of a battery with an incorrect type that can defeat a safeguard;
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Notice (Canada)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

Attention: