Shenzhen Quanya Trading Co Ltd T6 True Wireless Earbuds User Manual
- June 9, 2024
- Shenzhen Quanya Trading Co Ltd
Table of Contents
Shenzhen Quanya Trading Co Ltd T6 True Wireless Earbuds User Manual
Package List
-
Wireless Earbud 2 Magnetic Charging Case 1
-
*User Manual 1
** -
*Ear Tips 3 (S/M/L)
** -
*Type-C Charging Cable 1
**
Important Notes
-
Register your product on tranya.com to get an EXTRA three-month warranty for free
-
Before using the T6 wireless earbuds, please charge both the case and earbuds.
-
We provide Three pairs of rub eartips. Please choosethe best fit for you.
-
If both earbuds don’t sync together, please reset the earbuds.
-
If the earbuds don’t charge, please clean the charging slot on the case and the contact surface on the earbuds.
-
If the sound becomes low witho control, please use tweezers to take out/remove the net inside the earbuds.
Button Control
Play/Pause| | Press once (L/R)
Previous/Next track| | Press 3 times (L/R)
Volume down/up| | Press twice (L/R)
Reject a call| 
| Press and hold for 1 second
(L/R)
Answer/End a call| 
| Press once (L/R)
Note: You can customize the button control function in the “Irony° Audio* APP
and set the pressing times of different functions as you like.
POWER ON
Automatically
Manually
(Long press and hold BOTH earbuds for 3 seconds)
POWER OFF
Automatically
Manually
(Long press and hold EACH earbud for 3 seconds)
Note: When the charging case is at low battery or out of power, the earbuds will not automatically power on/off, please turn them on/off manually.
Wearing
-
Put the earbuds into your ears.
-
Rotate the earbuds to auricle side to fit snugly.
CONNECT THE EARBUDS
-
Power on the earbuds and turn on the Bluetooth in your phone.
-
Select “T6” and confirm.
Note:
- You can rename your 76 earbuds in the “Tranya Audio” APR
- T6 earbuds can connect to 2 different devices at the same time.
CHARGING
-
Charging the Earbuds
Charging:Red indicator is on Fully Charged: Red indicator is off. -
Charging the Case
Four lights will be all on 61 when it is fully charged.
HOW TO USE MULTIPOINT CONNECTION
- Turn on the Bluetooth of device 1, then find -1•6″ on device 1 and connect to it
- If you want to pair with two devices simultaneously, please turn off the Bluetooth of device 1 first, then turn on the Bluetooth of device 2; find “T6” on device 2 and connect to it
- Finally, turn on the Bluetooth of device 1 and device 2,the T6 will stay connecting to your both devices.
Note: When you want to switch to device 2 while using device 1, please pause the audio playback of device I first
INSTALL TRANYA AUDIO APP
Device requirementiOS9.0 and aboveAndroid 44 and above to support Bluetooth
40.
- Open your App store and search “Tranya Audb” to install.
- Or scan the following QR code to install “Tranya Audio”APP.
HOW TO RESET THE EARBUDS
If your earbuds stop syncing with each other, please follow the below steps to reset the earbuds:
-
Put 2 earbuds back to the charging case and make sure both indicators are lighting
-
Long press both earbuds’ buttons for at least 8 seconds, until white LEDS start flashing 3 times.
FAQ
Q: Why does signal interruption occur in some places, such as along the
railway and the airport?
A: There are usually lots of underground cable lines along the places
mentioned above, which might cause electromagnetic interference and result in
the siganal interruption.
Q: My earbuds don’t charge, what can I do?
A: Please try to follow the below steps:
-
Clean the charging slot
-
Clean the charging on charging case. connector on earbuds.
Q: Why won’t my earbuds power on/off automatically?
A: The earbuds would not power off automatically when the case is at low
battery or out of power. Please recharge the case. And you can long touch for
4 seconds to power on and long touch for 4 seconds to power off the earbuds.
Q: Will the Bluetooth mouse cause the signal interference?
A: Perhaps. When your Bluetooth mouse and earbuds are connected to the
same device, it might happen.
eVatmaster Consulting GmbH Betbnastr. 30 80325 Frankfurt an 1.4311 Germany
contact* eyatmastericom
osr_w_4onon3000004
HUA ‘TING LAGTED 3 Glass Street Hanley, Stoke On Trent, ST12E7 United Kingdom
Manufacture:
Nome: CHANDASUNG TECH (SHENZHEN) CO.,LTD
Address: Rm 802,Building B, Zhonghengsheng High-tech Zone, No.3 Xinyu
Road Xincliao Street, Baaan District Shenzhen, China.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause u ndesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in
portable exposure condition without restriction.
Product Model: T6 PMN: True Wireless Earbuds
ISED statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body. .
For more information, please visit: tranya.com
For any assistance, email us: support@tranya.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>