SOS EV-06 Smartwatch User Manual

SOS EV-06 Smartwatch

ABOUT EV-06

This safety watch is designed specifically for the elderly and isolated workers. The watch combines a variety of intelligent functions, such as SOS alarms, two-way calling, heart rate, blood oxygen, and step tracking. Its operation is very simple. Please read this operation guide carefully before using it.

Accessories

SIM Card Installation

• Please do as the below picture shows. Use the specialized screwdriver to remove the screw.
• Put the SIM card and press inward with the “SIM tweezer”. if the SIM card does not pop out. it means the SIM card has been inserted.
• Put the cover back and secure it with a screw.

Charging your Watch

• Connect the USB cable from charging base to the AC adaptor.
• Place the watch into the charging base correctly. you will hear spoken confirmation “your watch is charging”.
• Please fully charge the battery daily for around 2 hours or when battery is low.

The watch battery is not removable. After a long period of inactivity, the watch may not be turned on due to low battery. please charge it every day to ensure that the watch can work normally.

Functions and Basic Settings

When the watch is turned on. you can swipe left or right to view all available functions. such as contacts. watch faces. heart rate. blood oxygen. step tracking. alarm. settings. and more. On the watch face home screen. you can see the time. date. and battery information.

Making a phone call

• Slide rightwards to enter the interface of Contact. select the contact person. and make a call.

Steps

• Keep sliding right to enter the interface of Steps. step counting is enabled by default and opened all day. You can also view distance and consumed calories.

Heart Rate Measurement

Wear the watch on the left hand and click heart rate. after several seconds checking. the screen will display your heart rate 8PM.

Blood oxygen monitoring

After the watch is worn steadily. click on the “Blood oxygen” icon. After a few seconds. the screen will display your blood oxygen saturation percentage.

Activating a sos Alarm

Press and hold the button for 3 seconds. the device will vibrate and display the SOS alarm status on the screen.

• After SOS alarm is activated. you wm hear a voice prompt confirming the activation of the sos alert and allowing you approximately 10 seconds to cancel the alarm. If the sos is not cancelled in time an SOS alert text message is immediately sent to the emergency contact numbers followed by the outgoing calls.
• If the watch fails to connect to the first number. it will call the second number after delay of 10 seconds. In case the second number fails to be connected as well. the system will connect to the third number etc.
• Between each call. it will have 10 seconds delay, during this time. user can stop call sequence or prevent a possible false alarm by pressing SOS button.

Notes on Volcemall

We advise emergency contacts to switch off any voice mail facility on their phone to prevent delay in reaching help. However. the following safeguards are used if a voicemail is reached:

• The wearer can end the current call by dicking the SOS button and the calling sequence to continue if the voice mail does not automati-cally disconnect
• An emergency contact can call back to the watch if they are disconnected. Remember that the watch maybe already calling the next contact unless the calling sequence has been stopped.

Fall Alarm

The watch can automatically detect a fall. When this occurs the watch will give a warning message to the user.

• some daily activities like sports or even sitting down abruptly can trigger the fall alarm.
• The wearer has a short time to cancel a fall alarm by clicking the Cancel on the watch. If the alarm is not cancelled. emergency contacts will be called.

It is possible that the watch will not detect every real fall. We strongly advise the wearer to press the SOS button in any emergency situation, if they are able.

Getting a GPS fix

To get an initial GPS fix. go outdoors or near a window so the watch can get a fix on the satellites. This could take few ninutes depending on your environment.

GPS functionality may be unavailable or inaccurate in some locations (for example, availability or accuracy of GPS location maybe impacted inside buildings or near tall buildings or other tall features or underground).

• The watch also provides Wi-Fi. LBS positioning, when GPS is unavailable. it will switch to Wi-Fi and LBS for locating.
• The home Wi-R and beacons provide at home out of home information in addition to optimizing watch battery life.
• Please note Wi-Fi and LBS tracking service is not 100% accurate, it can be used to approximate your location only.

General Specifications

• Dimension: 46.9mm041.7mm015.4mm/l.84in-
• 1.64in00.60in.
• Weight: 38g/1.34oz.
• Battery: Rechargeable, 3.8V,600mAh.
• Charging voltage: 5V/DC lOA.
• Waterproof: IP67.
• 4 locating technologies: GPS, Beacon, Wi-Fi. LBS.

Please comply with the instructions to extend the watch life:

• Don’t use 8. Store the watch in dusty, hot. cold, electric. chemical, areas. Please always keep the watch and accessories dry.
• Don1 drop, shake or knock the watch, Rough handling can break it
• Clear the watch with a piece of dry cloth. Don’t clean in chemicals, detergent.
• Don1 disassemble or refit the watch as it will void your warranty.
• Using other batteries will cause unwanted situation.
• To avoid accident. never play ti,e watch while driving.
• Please turn off the watch in aircraft and follow any restrictions. Wireless devices can cause interference in aircraft.

FCC Warning

• Labeling requirements.
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.

• Information to user.
  Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radiofTV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or Iran sitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
3. This equipment should be installed and operated with a minimum distance 5mm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>