CITIZEN Eco-Drive Abbreviated Watch Instructions

CITIZEN Eco-Drive Abbreviated Watch

Product Information

General Solar-Powered Watches are a type of watch that is powered by solar energy. These watches come in three different models: 3-hand, 3-hand and date, and 3-hand and date/day. The watches have an hour hand, a minute hand, and a second hand. The crown of the watch has three positions that allow for the setting of the time and date indication.

Component Identification

• Hour hand
• Minute hand
• Second hand
• Crown

Product Usage Instructions

Setting the Time

To set the time on the watch:

1. Pull the crown out when the second hand points to 12:00 (0 second). The second hand will stop.
2. Rotate the crown to set the time.
3. Push the crown in to the 0 position in accordance with a reliable time source. The second hand will start moving.

Setting the Date Indication

To set the date indication on the watch:

1. Pull the crown out to position 1.
2. Rotate the crown counterclockwise to adjust the date indication.
3. Push the crown in to position 0 to finish the procedure.

Setting the Date and Day Indication

To set both the date and day indication on the watch:

1. Pull the crown out to position 1.
2. Rotate the crown to adjust both the date and day indication.
3. Push the crown in to position 0 to finish the procedure.

Note : Make sure to set the time and date indication in accordance with a reliable time source.

Abbreviated instruction

• This watch is light-powered. Be sure your watch is fully charged before use.
• For complete instructions for setting, use, charging time and specifications, refer to the full instruction manual: Instruction Manual of general solar-powered watches

3-hand models

Illustrations for reference only. Actual appearance of your watch may differ from the illustrations above. Some models do not have the second hand

Setting the time

1. Pull the crown out when the second hand points to 12:00 (0 second). The second hand stops.

2. Rotate the crown to set the time.
   Move the hands 4 or 5 minutes forward of desired minutes and move them back to the right time to set the time more precisely.

3. Push the crown in in accordance with a reliable time source. The second hand starts moving

3-hand and date models

Illustrations for reference only. The actual appearance of your watch may differ from the illustrations above

Setting the time

Do not adjust between 9:00 PM and 1:00 AM. Otherwise, the date indication may change incorrectly

1. Pull the crown out to position 2 when the second-hand points to 12:00 (0 seconds).
   The second-hand stops.

2. Rotate the crown to set the time.

3. The change of date indication shows it just became AM. Set the time to ensure proper AM or PM time is set.

4. Move the hands 4 or 5 minutes forward of desired minutes and move them back to the right time to set the time more precisely.

5. Push the crown into position 0 in accordance with a reliable time source. The second-hand starts moving.

Setting the date indication

Do not adjust between 9:00 PM and 1:00 AM. Otherwise the date indication may change incorrectly.
Date indication adjustment is required on the first of the following months: March, May, July, October and December.

1. Pull the crown out to position 1 .
2. Rotate the crown counterclockwise to adjust the date indication.
3. Clockwise rotation moves nothing.
4. Push the crown in to position 0 to finish the procedure.

3-hand and date/day models

Illustrations for reference only. The actual appearance of your watch may differ from the illustrations above

Setting the time

Do not adjust between 9:00 PM and 4:30 AM. Otherwise, the date and day indication may change incorrectly.

1. Pull the crown out to position 2 when the second-hand points to 12:00 (0 seconds). The second-hand stops.
2. Rotate the crown to set the time.
3. The change of date indication shows it just became AM. Set the time to ensure proper AM or PM time is set.
4. Move the hands 4 or 5 minutes forward of desired minutes and move them back to the right time to set the time more precisely.
5. Push the crown into position 0 in accordance with a reliable time source.
   The second-hand starts moving.

Setting the date and day indication

• Do not adjust between 9:00 PM and 4:30 AM. Otherwise, the date and day indication may change incorrectly.
• Date indication adjustment is required on the first of the following months: March, May, July,

October and December.

1. Pull the crown out to position 1.
2. Rotate the crown to adjust the date and day indication.
3. Rotate it counterclockwise to change the date indication.
4. Rotate it clockwise to change the day indication.
5. Push the crown in to position 0 to finish the procedure.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>