Srhythm NC95 NiceComfort 95 Headphones User Manual
- June 9, 2024
- Srhythm
Table of Contents
Find the rhythm of your soul
Nice Comfort 95 (NC95)
User Manual
Safety instructions
Hearing safety:
- Headphones can’t be used during charging for your safety.
- DON’T use the headphones for any other purpose while driving.
- Please use cautiously and stop using headphone in dangerous situation.
- Please do not listen for a long time at high volume to avoid hearing damage.
- For your safety, please do not turn the volume too high while running outside to ensure that you can hear sound in your surroundings.
- Clean only with a dry cloth.
Operation Safety:
- Use original or certified cables for charging and voltage within 6.3V.Power will be cut off and start protection mode when the voltage exceed 6.3V and within 36V.Headphone will be broken when the voltage over 36V.
- Keep away from children to avoid danger from improper use.
- Headphones can’t be charged or turned on in the extreme temperature. Please use headphones within the operating temperature range: 32° F (0°C) – 113″ F (45°C).
- Do not submerge headphone in the water.
- D0 not use corrosive cleaner/oil to clean headphone
- Turn off headphone Bluetooth and ANC function to save power when you do not use headphone.
What’s in the Box
At a Glance
How to Use
Use ANC Function| To turn on AN, press the ANC Button when Bluetooth
trued on; Long press 3 seconds the ANG Button when Bluetooth turned off (the
LED nicator light will be green when ANG ON)
To turn off ANC, press the ANG Button; (the LED indicator light green color
will be off when ANG OFF)
---|---
Use Transparency Function
| Press the ANC button ta switch between ANC made, Normal mode and
Transparency mode.
---|---
Use Bluetooth Function| 1. Hold the Multi-function Button far 3-5
seconds to turn Headphone Bluetooth on, then anther pairing mode.(the LED
indicator light will boo blue and rod flashing quickly.]
2 Start your mobile phone Bluetooth and find headphone Bluetooth pairing name
“Rhythm NC 5” to click It to poirithe LED indicator ight wile e fishing slowly
after paired successfully.)
3. Hold the Multi-function Button for 3-5 seconds o turn headphone Bluetooth
off.
Note: I NG9S is Nat paired with any devices within 5 minutes after
Bluetooth turned on, It will automatically shut down to save power
---|---
| Adjust the volume by rotating the multifunction button clockwise or
counterclockwise.
| Press the Multi-function Button to play/pause music or answer/end call.
| Previous song: press three times. Next song: press twice.
| Double-press the Multi-function Button to reject an incoming call.
| Press the Multi-function Button 4 times to activate voice assistant.
Function Details
Easy Pairing
- Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth on, then enter pairing mode.(the LED indicator light will be blue and red flashing quickly.)
- Keep headphone and your mobile phone as close as possible during pairing process.
- Turn on your mobile phone Bluetooth. Search for headphone Bluetooth signal on mobile phone and click “Rhythm NC95” to pair.(the LED indicator light will be blue flashing slowly after pairing successfully.)
- If you are asked for a password/PIN code during pairing procedure, please enter “0000” (four zeros).
Pairt the Second Bluetooth Device
Step 1: Pair NC95 with First device via Bluetooth successfully and then
turn off the First device’s Bluetooth.
Step 2: Pair NC95 with the Second device via Bluetooth.
Step 3: Turn on Bluetooth of the first device and pair it with headphone
again.
Now both of your devices are paired with Nc95 for easy switching.
Active Noise Canceling(ANC) Mode
To turn on ANC, press the ANC Button when Bluetooth turned on; Long press 3
seconds the ANC Button when Bluetooth turned off; (the LED indicator light
will be green when ANC ON)
To turn off ANC, press the ANC Button; (the LED indicator light green color
will be off when ANC OFF)
Transparency Mode
Press the ANC button to switch between ANC mode, Normal mode and Transparency
mode
Wired Mode
Headphone support AUX input for wired external audio source connection. Simply
turn headphone Bluetooth off and plug in the audio cable.
ANC can’t be turned on in wired mode. But it works whether Bluetooth is on or
off.
Buttons and Microphone can’t be used in wired mode
Voice Dialing
Press the Multi-function Button 4 times to activate voice dialing
function(compatible with iPhone Siri and selected Android voice dialing
software).
How to Wear
Airplane Adaptor Connection
Connect the Airplane Adaptor to audio socket(double holes) of aircraft seat,
use 3.5mm audio cable to connect with your headphone and Airplane Adaptor.
Warning:
Only use for airplane, Can not be plugged into the power socket.
Headphone Specification
LED Indicator Light
Pairing: Blue and red lights flash alternately
Paired: Blue light flashes
Playing: Blue light slowly flashes
Charging: Red light turns on
Full Charge: Red light turns off
Battery Low: Red light turns on with voice prompt
ANC ON: Green light turns on
ANC OFF: Green light turns off
Bluetooth OFF: Blue and red lights turn off
- Please kindly note that perhaps sometimes these LED indicator light color will be mixed to become other colors(pink, purple, etc.) occasionally.
Technical Specification
- Product name: Rhythm NC95
- Battery capacity: 1000mAh
- Input: 5V/1A
- Chip: BES2300Y
- Charging time: About 2.5 hours
- Use time: 65 hours (Bluetooth on+ANC off)
- Bluetooth version: V5.0
- Bluetooth profile: A2DP, AVRCP, HSP, HFP
- Bluetooth range: 10m/33ft
- Waterproof rating: IPX4
- Net weight: 254g/0.561b
- impedance: 32 Q
- Driver diameter: ®40mm
- Frequency response: 20—20KHz
Charging
Use the included Type-C charging cable to connect to headphone Charging Port.
Connect the other end of charging cable toacomputer USB port or USB wall
charger under 6.3V voltage. Turn off headphone Bluetooth and ANC function
before charging. Headphones can’t be used during charging for your safety. The
LED indicator light will be off or blue color when full of charge basing on
headphone turn off status.
Start your mobile phone Bluetooth and find headphone Bluetooth pairing name
“Rhythm NC95” to click it to pair.(the LED indicator light will be blue
flashing slowly after pairing successfully.)
Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth
off.
NOTE: Ambient temperature exceeds the charging temperature range of 32° F
(0°C) – 113° F (45°C).
If any issues, here tips for you:
- Full charge your headphone with original USB-C to USB-C charging cable and 5-10W power wall charger (don’t use fast charger).
- Reset headphone by inserting audio cable into headphone audio socket then removing it. Or the upgraded NC5 headphones would be reset automatically when charging.
Delete Pairing: Hold the multi-function button for 10 seconds when headphone is off. During this process, “Power on, Pairing and two beeps” can be heard sequentially
Q&A
1. Q: Why can’t headphone pair with my mobile phone?****
– A: Please check if your headphone is in pairing mode or re- connection mode, check if Bluetooth search function of your Bluetooth device is turned on, if all done, then go to Bluetooth menu of your Bluetooth device, delete /ignore the headphone Bluetooth pairing name “Rhythm NC95” After that, you can try to reconnect Bluetooth cording to above “Easy Pairing” steps.
2.Q: Why can’t headphone turn on?****
– A: Please double check the battery status of your headphone.
3.Q:CanI replace battery in the headphone?****
– A: No, you can not. Headphone uses a built-in non-detachable Li-Polymer battery that can’t be replaced.
4.Q: Can lose headphone while driving?****
– A: For your safety, we strongly recommend that you do not use headphone while driving to avoid distraction.
5.Q: Why does headphone sometimes disconnects with Bluetooth device within 10 meters?****
– A: Please check if there are any metal materials or obstacles within a
relatively close range or your surroundings that perhaps interfering with
Bluetooth connection.
– This may happen because Bluetooth is a radio technology which is sensitive
to objects between headphone and other devices.
6.Q: Why can’t hear any sound from my computer or mobile phone?****
– A: Please check if output channel of your computer supports A2DP profile. Also check the volume settings on your headphone and computer/mobile phone.
7.Q: Why am unable to use headphone to control the volume of a track playing on an APP on my mobile phone?****
– A: Due to configurations of different application software, headphone may not be completely compatible with some APPs.
8. Q: What do if Bluetooth can not close or open?****
– A: Please reset Bluetooth function of headphone by inserting an audio cable into headphone audio port, then removing it. Before re-connecting kindly remember to delete/ignore headphone Bluetooth pairing name “Rhythm NC95” on your mobile phone.
9. Q: Why does Bluetooth turn off when connect an audio cable?****
– A: This is one of our special features. When users insert an audio cable into headphone audio port, all Bluetooth feature buttons stop working and Bluetooth tunes off. But, Bluetooth will be available again when audio cable is moved.
10.Q: Why does audio quality become poor on Windows PC?****
– A: Some customers have mentioned poor audio quality on Windows PC. Please note that there are “Headset” and “Headphone” modes you can toggle by changing your output device. Selecting “Headphone Mode” will drastically improve the audio quality.” Headset Mode” is designed for highly compressed VOIP calls, etc. That’s not the fault of headphone product, that’s just the limitation of that protocol. If you are in “Headphone Mode” the audio quality is fantastic.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
distance <5mm between the radiator& your body.
ISEDC warning
This device complies with Innovation, Science, and Economic Development Canada
license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The distance from body to use the device is <5mm.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>