IBERA IB-PB26 Adjustable Phone Holder with Bike Mount Instruction Manual
- June 9, 2024
- IBERA
Table of Contents
IBERA IB-PB26 Adjustable Phone Holder with Bike Mount
Product Information Ibera Adjustable Phone Holder
The Ibera Adjustable Phone Holder (Model: IB-PB26) is a phone holder that can hold a range of phones. The holder can be used in both portrait and landscape modes. The holder comes with two mounting options: one for mounting the phone case on the stem (Q5 StemClamp) and the other for mounting the phone case and Minbar on the handlebars (Q6 BarClamp). It is important to note that the phone used with the holder must conform to the size limits of the holder, and the holder must be used correctly to ensure the phone’s safety.
Product Usage Instructions
Before using the Ibera Adjustable Phone Holder, read the instructions carefully. There may be updated or additional information available on the manufacturer’s website.
Using Case Instructions
- Remove any protective case/cover before placing the phone in the Ibera phone holder.
- Fit the top of the phone (lens end up, facing forward) in the upper holder clasps.
- Holding the phone firmly with one hand, pull the lower spring-loaded arm downward to fit the phone into the lower holder clasps.
- Release the lower arm to close and secure the phone in the holder.
- Ensure that the phone is inserted firmly inside all four clasps of the holder before each ride.
- Remove phone case. Fit the top of phone (lens end up, facing forward) in upper holder clasps.
- Holding phone firmly with one hand, pull lower spring-loaded arm downward to fit phone into lower holder clasps.
- Release lower arm to close and secure phone in holder. Ensure phone is inserted firmly inside all 4 clasps of the holder.
Do not use the holder if your phone does not fit firmly inside all four clasps of the holder. By following these instructions, you can safely and securely use your phone while cycling.
This holder can carry a range of phones, but your phone must conform to the holder’s size limits, and you must use the holder correctly.
- Phone Size (Min. – Max.)
- H : 140 mm – 165 mm (5.6″ – 6.5″)
- W : 70 mm – 80 mm (2.75” – 3.15″)
- D : 7 mm – 9.7 mm (0.28″ – 0.38″)
- including any protruding lenses.
Holds a range of phones
- Access touch-pad controls on the fly
- Portrait or landscape mode
- Adjustable size
- Holds phone securely
Mounting Options
Q5 StemClamp, attaches to stem. Q6 BarClamp, attaches to handlebars. With
Minibar: carry phone & other accessories (headlight, bike computer, bell etc.
– not supplied). Read instructions before use. There may be updated or
additional information on our website.
Warning
Remove any protective case/cover before placing phone in Ibera phone holder.
Before each ride, ensure phone is inserted firmly inside all 4 clasps of
holder. Do not use holder if your phone does not fit firmly.