Crabtree Residual Current Device with Overcurrent Protection Instruction Manual
- June 9, 2024
- Crabtree
Table of Contents
Crabtree Residual Current Device with Overcurrent Protection
Product Information
The product is an electrical device that should not be disposed of with household waste. It should be recycled where waste disposal facilities exist. Recycling advice can be obtained from the retailer, wholesaler or local authority.
Product Usage Instructions
- Before disposing of the product, check with your local authority or waste disposal facility to determine the appropriate recycling method.
- If your local authority or waste disposal facility does not recycle electrical products, check with your retailer or wholesaler for recycling advice.
- Do not dispose of the product with household waste as this can harm the environment.
- Follow any additional instructions provided by your local authority or waste disposal facility for safe and appropriate recycling.
INSTALLATION INSTRUCTION
Single module device suitable for use in Crabtree Starbreaker consumer
units.
-
Plug the RCBO onto the DIN rail/ bus bar system. Ensure the DIN rail dip is securely attached to the DIN rail.
-
Route N flying lead to chosen N bar connection.
-
Route functional E flying lead to chosen E bar connection.
-
Connect L&N outgoing cables to top Land N terminals.
-
Check tightness of all connections and tighten to the required torque 2Nm (17. 7 lbf-in)
NOT connect using power-driven screwdrivers. -
Test after installation. (DO NOT INSULATION RESISTANCE TE8T Tltl8 RCBO)
Waste electrical products should not be disposed of with household waste. Please recycle where waste disposal facilities exist. Check with your retailer, wholesaler or local authority for recycling advice.
Electrium Sales Limited,
Walkmill Lane,
Cannock,
WS11 OXE,
England
Tel: 01543 455000
Fax: 01543 455001
LF1137