RCA RPJ275 1080P Full HD Projector Instruction Manual

RCA RPJ275 1080P Full HD Projector

Ideal for dark viewing environments for optimal performance. Please note: Projector brightness is measure in ANSI lumens. Your viewing environment is the deciding factor on how many lumens your projector needs.

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

This product has been manufactured and sold under the responsibility of CURTIS INTERNATIONAL LTD.
RCA, the RCA logo and the two dogs (Nipper and Chipper) logo are trademarks used under license by CURTIS INTERNATIONAL LTD. – further information at www .rca-brand.com.
All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners.

Safety Instructions & FCC Warning

Important Safety Instructions

• Please use the included AC power cable to power the machine. Only use the included accessories specified by the manufacturer.
• It is normal for the machine to generate heat during operation. To prevent overheating, do not block the ventilation openings.
• CAUTION: Do not look straight into the projector lens while on, as it may cause serious eye damage. Do not touch the lens. ec1ean only with a dry cloth.
• To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Objects filled with liquids, such as vases, should not be placed on these devices, as it may lead to potential accidents that damage the device.
• Protect this device from overexposure to direct sunlight, heat, big temperature fluctuations, and moisture. Avoid extreme temperatures. The suitable operations and storage temperature for this device and its accessories are 0°C to 35°C / Q°F to 95°F.
• Avoid any type of impact, as it may damage the internal components.
• Do not make any repairs to this device by yourself. Our company will not cover the warranty if self-repair efforts were undertaken.
• Please contact the seller for technical support when the product has any type of problem, Contact details are revealed at the end of this manual.

FCC Warning

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Package Listing

• Projector
  

• Power Adapter

• Lens Cover

• Remote Control
  

• User Manual

• TOP5 tips

Remove & Close The Lens Cover

Remove the lens cover before using

Close the lens cover when unit not using

Boot Operation Guide

TURN ON

1. Plug the projector into a power source. Indicator light: Red.
2. Press the power button . Indicator light:
3. The projector turned on after 5 seconds.

TURN OFF

1. Turn off the power button .
2. Unplug the power adapter.

Note
Please turn off the projector before unplugging the power source, so as not to affect the life and operation of the projector.

Distance Between The Projector And Screen

Light, brightness, etc. will affect the projection distance, this data is for refe rence only.
Projection Position
It is recommended to place the projector in front of the center of the screen.

Viewing Options

The projector can be used to project onto a wall or screen, mounted from the ceiling or on a
table, When projecting from the rear position, a special screen will be needed (not included)
to display the image. Be sure to aim the remote at the sensor on the front or rear of the projector.

Placing Your Projector On Ceiling

When installing the projector in the ceiling, please purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount.
Before installing the projector in the ceiling, please check to make sure the ceiling structure can support the weight of the projector and the mount. If in doubt, please ask the advice from an installation professorial.

NOTE: Projector mount and screw(s) not included

Adjust the Vertical Location

Follow below picture to adjust the vertical location

Adjust the Focus and Keystone

• As shown in Picture, Rotate the edge of the lens until you get a clear picture.
  Note: Please avoid touching the lens.
  If you touch it accidentally, Please wipe with the cleaning cloth in the accessory bag.
  

• Keystone Correction on the remote control
  Path1 : On the remote control, press or
  Path2: Click “SETUP” -select “Option”-click “Keystone Correction”-Adjust by Up and down keys on remote control.

Functional Overview

1. Source
2. Return
3. Left
4. Down
5. OK
6. UP
7. Right
8. Menu
9. Power On/Off
10. IR Window
11. Lens
12. USB Port
13. HDMI 1 Port
14. DC IN Plug
15. AV IN Port
16. Headphone out or Audio out
17. Micro SD Port DC IN Plug
18. IR window ( Front side）
19. ANGEL ADJ. Knob
20. HDMI 2 Port
21. USB charging Port (Only for charging Streaming stick, stick not included)

Controls of Remote

other menus
| Press to access projector Settings
Go To Number Keypad| This button does not apply for this model.
MUTE| Press to mute volume

back/fwd| Press to reverse or fast forward during playing video/music
VOL+NOL| Press to adjust audio level.
SOURCE| Press to enter home page
EXIT| Press to exit menus.
ZOOM| Press to adjust the aspect ratio during playing
video (16:9/ 4:3)

Install Remove Battery Of Remote

Remove the battery compartment cover on the back of your remote by carefully sliding to open. The battery cover can then be lifted away. Fit the correct batteries (2XAAA batteries not included), referring to the polarity markings. Finally, replace the cover.

NOTE:

• Batteries shall not be exposed to excessive heat such as sunshine, fire.
• Make sure that the batteries are installed correctly.
• Only same or equivalent type batteries are recommended.
• Do not dispose of batteries in fire, battery may explode or leak. Do not try to recharge a battery.
• Do not mix old and new batteries.
• Do not mix alkaline, standard(carbon-zinc), or rechargeable (ni-cad,ni-mh,etc) batteries.

Connection Instructions

Select an input source
You will see the picture below when the projector is turned on.
You can choose among the different input sources ( Movie/ Music/ Photo/ AV/ HDMI1/ HDMI2) by pressing the arrows buttons (UP/DOWN/ LEFT /RIGHT) on the projector touch panel or remote control.
You can connect different devices with the projector, according to the following connection instructions.

HDMI device connection

The projector can connect to devices with HDMI input function. It is compatible with laptops, DVD players, Blu-ray players, Chromecast, TV Stick, etc. An HDMI cable is not included .

The projector is equipped with 2 HDMI input ports,

1. If you connect your devices to the projector via “HDMI 1” port, please click “HDMI 1” input souce.
2. If you connect via “HDMI 2” port, please click “HDMI 2” input souce.
   

Note: In rare cases, if the projector’s speaker has no sound when playing a DVD movie in a player connecting to the HDMI input, please check the player’s digital audio settings and make sure it is set to “Auto” mode or “PCM” mode
Note: Please change sound settings on video source device if No audio experienced (due to non Dolby support).

Multimedia connection

Insert USB / Micro SD card into the corresponding slots (as shown in the picture).
Select “ MOVIE”, “MUSIC”, “ PHOTO” to enter the content you want to play.

Note: Compatible 4K , be able to play the 4K file via HDMI , USB and Micro SD ( only up to 4K/30FPS, and streaming rate 50Mb )

Audio devices connection

The projector can connect to a headphone and to a wired audio system using a 3.5mm
jack ( not include )

Using Photo Mode Menu

Press button to enter projector menu. Press again to previous status
Use buttons to select manual page.
This manual will be shown on the upper right of the screen.

1. Picture Mode
   Select User , Dynamic, Mild or Standard

2. Contrast ,Brightness, etc
   Set Picture Mode to “ User “ to adjust these settings

3. Color Temperature
   Select Warm ,Cool, or Medium.

4. Aspect Ratio
   Select 16:9, 4:3

5. Noise Reduction
   Select Off, Low , Middle , High

Aspect Ratio

4:3

|

The signal in a 4:3 aspect ratio projection image

16:9|

The signal in a 16:9 aspect ratio projection image

Press button to enter projector menu. Press again to previous status.
Use buttons to select manual page.
This manual will be shown on the upper right of the screen.

1. Sound Mode
   Select Music, Movie, User, Sports ,or Standard

2. Treble, Bass
   Set Sound Mode to “ User “ to adjust these settings

3. Balance
   Adjust the audio balance : -50 ~ 50

Using Movie Mode Menu

Press button to enter projector menu. Press again to previous status.

Use buttons to select manual page. OK This manual will be shown on the upper right of the screen.

1. OSD Language
   Select different language, Follow below figure.

2. Projection Mode
   Select Desktop Front , Destktop Rear, Ceiling Front , Ceiling Rear.

3. Keystone correction
   Select 0~ +-18

4. Digital Zoom
   Select 0~10

5. Factory Reset
   Select Y or N.

6. Information
   Display the unit information as below

Model: RPJ275
SN:RPJ275
RCA
SW Ver: V7.0
LOGO: RCA

Remove the compartment cover

Please see the illustration and remove the compartment cover on the back of the projector by pulling out carefully . And you’ll find here is with HDMI 2 port and USB charging port .

Specifications

Power Input Connect Included
Adapter| DC 19V 9A
Included Adapter Connect
DC input of the unit| Input AC 100-240\1, 50/60Hz
Output DC19V, 9A
Display Color| Not Supported
Dolby Sound| Not Supported
Keystone| ±30º
Connect Types| HDMI / USB / Micro SD Card /AV/ Audio
Input| HDMl2 / AV1 / Micro SD Card 1 / USB 1
Output| Headphone out 1
USB Port| Support USB device up to 1 TB
Micro SD Card| Support Micro SD Card up to 1TB
Supported audio formats| .jpg.png.bmp
Supported video formats| .avi.flv.rmvb.mkv.mp4.mov.mpg.mpeg. ts.tp vob 4K ( only up to 4K/30FPS, and streaming rate 50Mb)
Weight| 3.94kg
Dimension| 304.5103253mm
Brightness Output| White light output ANSI : 450 lumens
USB/Micro SD specified file structure| FAT/FAT32/RAW/NTFS

For service assistance and product information, please call: 1-800-968-9853.
Pour obtenir assistance et information appelez: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com

To make a warranty claim, please email support2@curtiscs.com or call 1-800-968-9853

90 day Warranty

This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.

This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).

We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.

For faster service, locate the model, type, and serial numbers on your appliance.

ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you contact the Support Team:

• Name, address and telephone number.
• Model number and serial number.
• A clear, detailed description of the problem.
• Proof of purchase including dealer or retailer name, address and date of purchase.

FAQ

Q: The projector is not turning on.****

A : Please be sure that the AC power cable is plugged in tightly, and press the power switch on the projectors panel or use the remote control to turn it on.

Q: The projector is turned on, but no image is displayed****

A : ① Please make sure your device is connected to the projector correctly.
② Check the lens cover has been removed.
③ Check if the input signal source is correct, and then switch into projection mode, Wait for a while and operate it again.
④ Please make sure that the video source is equal or under 1080P
⑤ If it is still not working, please contact us for further support.

Q:The Lamp (Bulb) switches off after a period of time.****

A : 1. Leave the projector to cool for a few moments.
2. Once cooled, check if anything is blocking the ventilation vents.
3. Turn on the projector.
If the issue persists please contact us.

Q: When playing a video, is see the image but I hear no sound****

A : If you connect to your laptop via a HDMI adapter. The audio cable of the adapter needs to be plugged into the audio output port from your laptop to the projector using a 3.5mm audio jack.

Q: The projection is not bright enough****

A : We recommend using the projector in a relatively dark environment to bring out the best image brightness.
This project is designed for Home Entertainment and not recommended for Power point or other business presentations.

Q: Spots on the screen.****

Using a vacuum cleaner to dean the lens. If cleaning does not resolve things, please contact your support provider for further assistance.

Q: I get a blurry image?****

A : The recommended projection distance is 3-5m. Please adjust the Keystone correction to get a rectangular image first, then adjust the Focus to get a clear image.
The optimal focus is obtained when the pixels are clearly visible. If the projection size is too large, the focus near the screen edges may be less sharp than at the screen center.

Q: My projector noise is too loud, is it broken?****

A : The projector noise comes from the fan of its cooling system . Projector generates heat during operation as the light bubble produces strong light to make a bright image.
It is normal for the projector to make a loud noise. Brighter the image .louder the sound is. You can place the projector far from where you are, or you can connect a louder speaker to the projector to cover up the noise.

Q: Can you adjust the brightness/Sharpness of the video?****

A : Path: Set up (Click “Source”)-Picture-Picture Mode(Choose “User”)-Adjust via remote control .For non-professionals, we recommend using the default value.

Q: No Sound?****

A :—Turn off the Dolby Audio in external device.
—Mute mode is running, press the Mute button on remote control can restore the sound.
—External Bluetooth Headphone/Earbuds was connected with the projector.
—Change sound settings on video source device if No audio experienced(due to non Dolby support)

Q: Automatic shut-down?****

A : —Self-Protection mechanism is activated. Please use it under a cool or ventilated environment will be best.
—-Please unplug the power adapter from outlet each time to prolong the service life after turned off the device.

References

• Curtis International - Affordable TVs, electronics and appliances
• Information about the license

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>